Axis 02285-001 TD3901 Strain Relief Cable Accessory
Overview
The Axis TD3901 strain relief cable accessory (02285-001) is a passive connector strain relief designed to prevent accidental cable disconnection and reduce mechanical stress on cable terminations. Install this on connectivity hub ports where cables experience frequent movement or vibration — loading docks, vehicle-mounted hubs, or installations with cables running along mechanical conveyors. The strain relief anchors the cable jacket just beyond the connector, absorbing flex stress that would otherwise concentrate at the solder joints inside the connector body.
Compatibility
The TD3901 (02285-001) is designed specifically for the Axis D3110 Connectivity Hub. Verify compatibility with your hub model before ordering — this accessory is not a universal connector and will not fit other Axis devices or standard RJ-45 ports without modification.
Installation Notes
Slide the strain relief onto the cable jacket before crimping the connector, or install it over an existing connector if the connector head diameter permits. Secure the relief body to the hub or panel surface using the integrated strain relief mechanism — do not rely on the connector friction alone. Position the cable exit angle to minimize sharp bends; gentle curves (minimum 1-inch radius) extend cable life. No tools are required for installation beyond standard cable management practices.
What's in the Box
- 1x Axis TD3901 Strain Relief Cable Accessory
