Axis 5700-331 Network Cable with Gasket, 5m
The Axis 5700-331 is a professional-grade network cable engineered for outdoor and moisture-critical surveillance deployments. The 5-meter length (16 feet) bridges the gap between camera mounting locations and network infrastructure without requiring intermediate connectors, reducing failure points in weather-exposed installations.
Key Features
- 5-Meter Cable Length: Eliminates the need for additional connectors or splitters between camera and switch, reducing weak points where moisture can penetrate. Suitable for perimeter mounts and soffit-mounted cameras that need reach to a nearby PoE injector or network switch.
- Integrated Gasket Sealing: The gasket creates a weatherproof, watertight barrier at connection points. This matters in applications where the cable enters a junction box, weatherproof enclosure, or directly terminates at a camera connector — moisture ingress here causes intermittent failures and corrosion that are difficult to diagnose.
- Weather-Resistant Construction: The cable jacket resists UV degradation and moisture absorption, extending service life in direct sunlight and high-humidity environments. Replace cables every 3–5 years in harsh outdoor settings; this construction extends that interval.
- Axis Ecosystem Compatibility: Designed to integrate with the full range of Axis IP cameras and outdoor surveillance accessories. Works with any Axis camera or device accepting standard RJ-45 network connections, eliminating guesswork during integration.
- Indoor and Outdoor Deployment: While marketed for outdoor use, the 5700-331 performs equally well in indoor wall runs, conduit installations, and controlled environments. No performance penalty for indoor-only use if you prefer factory-standard cabling throughout.
Deployment Context
This cable is most valuable in outdoor fixed-camera installations where a single continuous run from camera to PoE switch or injector minimizes connection points. Consider it for roof-mounted turrets, wall-mounted bullet cameras, and perimeter fence-line deployments. If your camera sits indoors with the cable running outdoors to reach infrastructure, the gasket protection justifies the cost.
In network switch planning, account for the 5-meter run within your overall cable budget. Many installations require multiple 5700-331 cables if cameras are distributed across a facility; plan power delivery and network pathing before purchase.
Integration Considerations
The 5700-331 is a passive component — no configuration required. Simply route from camera to switch or PoE injector. If your infrastructure uses PoE switches or managed injectors, this cable carries both data and power without modification. Verify that your switch or injector power budget supports your total camera load; this cable imposes no additional power drain.
Frequently Asked Questions
Q: Does the 5700-331 support PoE power delivery?
A: Yes. The cable carries standard PoE (802.3af) and PoE+ (802.3at) power without issue. No separate power supply is needed if your switch or injector supports PoE output.
Q: Can I use the 5700-331 indoors?
A: Yes. The gasket and weather resistance are additional features that do not degrade indoor performance. Many installations use it throughout for consistency and future flexibility.
Q: Is the gasket replaceable if it degrades?
A: The gasket is integrated into the cable assembly. If sealing fails, replace the entire cable. In outdoor installations, inspect gaskets annually or after extreme weather.
Q: What is the maximum cable run length for PoE delivery?
A: Standard PoE has a maximum recommended distance of 100 meters (328 feet) for data and power delivery. At 5 meters, voltage drop is negligible — no concern for standard Axis PoE cameras.
Q: Does the 5700-331 work with non-Axis cameras?
A: The cable is RJ-45 standard. It will physically connect to any device with an RJ-45 port, though Axis designed and tested it specifically for Axis products. Compatibility with third-party devices is not guaranteed by Axis.
Ted PerryPerspective based on aggregated and affiliated engineering team experience.
The Axis 5700-331 is a straightforward but often underestimated component in outdoor camera deployments. The integrated gasket is the key differentiator here — a molded sealing element that prevents moisture from creeping into connector interfaces where it causes corrosion and intermittent connectivity. I've seen too many outdoor installations fail not because the camera failed, but because water migrated into an unprotected RJ-45 connection over 12–18 months. The 5700-331 eliminates that failure mode if installed correctly.
Technical Highlights:
- Integrated Gasket Design: Weatherproof seal at both connection points prevents moisture ingress and corrosion — a common root cause of intermittent network failures in outdoor surveillance. Standard cables lack this protection entirely.
- 5-Meter Length: Reduces the number of intermediate connection points between camera and switch. Fewer connections mean fewer sealing failure points — a real reliability win in perimeter security and rooftop installations.
- PoE Compatibility: Supports both 802.3af and 802.3at power delivery without voltage degradation over the 5-meter run, so you won't encounter power-supply issues with standard Axis outdoor cameras.
Deployment Considerations:
- The gasket adds physical bulk to connectors — verify that your camera connector and switch port can accommodate a slightly oversized RJ-45 end. Tight wall-mounted enclosures may require careful routing.
- Gasket sealing is only effective if the cable is installed without kinks or sharp bends. A kinked gasket loses its watertight function. Route carefully, especially in soffit and eave installations.
- This is a passive cable — no configuration or firmware updates. Failure is binary: it either conducts or it doesn't. Test connectivity immediately after installation to confirm proper sealing and data path.
Best suited for fixed outdoor camera runs where the cable traverses exposed areas (rooflines, exterior walls, fence-line mounts) and terminates into weather-protected junction boxes or switch enclosures. If all your outdoor cameras are already mounted and you need reliable replacement cabling, or if you are building a new outdoor surveillance perimeter from scratch, the 5700-331 justifies its cost through reduced troubleshooting and re-termination down the road.
