IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
STI

SKU: STI-6931-W

STI STI-6931-W Call Point Stopper White Surface Mount

Surface mount call point with NFC credential authentication for access control
- HID proximity reader operates on NFC/13.56MHz for seamless credential verification
- Compact 6 x 1.5 inch white housing mounts directly to walls and frames
- Single endpoint combines call point activation with credential-based access authentication
Special Order · Ships in 2-3 weeks

$46.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7504

STI STI-7504 Snooper Stopper Clear Keypad Reader

Clear keypad reader blocks shoulder surfing at door entry points
- Transparent housing lets users see keypad while preventing code observation
- Door-mounted design integrates with standard access control systems
- Compact 95mm × 75mm form factor fits most credential entry installations
Special Order · Ships in 2-3 weeks

$44.44 $28.99 Save $15.45

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-7510E

STI STI-7510E Polycarbonate Flush-Mount Lock/Strike Enclosure

Polycarbonate flush-mount enclosure for recessed door strike installation
- Open-back box design recesses fully into wall for clean, seamless appearance
- Polycarbonate construction resists impact damage in high-traffic access points
- Integrates with standard door frame and strike assemblies, thumb or key lock
In stock · Ships same business day

$76.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-7510F

STI STI-7510F Polycarbonate Access Control Enclosure with Key Lock Strike

Polycarbonate access control enclosure with key-lock strike for door integration
- Enclosed back box consolidates lock strike and reader wiring in one unit
- Exterior key-operated strike enables manual override without electrical power
- IP59-rated polycarbonate housing resists impact and weather on glass or frame mounts
In stock · Ships same business day

$89.40 $56.99 Save $32.41

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7511A-HTR

STI STI-7511A-HTR Heated Polycarbonate Enclosure Thumb Lock

Heated polycarbonate thumb lock, NEMA 4 rated for frozen climates
- Built-in heating maintains operation in freezing conditions for year-round access
- Polycarbonate enclosure with NEMA 4 rating withstands wet, corrosive, dusty sites
- Thumb lock activation integrates into standard door frame security installations
Special Order · Ships in 2-3 weeks

$258.50 $178.99 Save $79.51

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-7511D

STI STI-7511D Polycarbonate Surface-Mount Lock/Strike Enclosure

Surface-mount polycarbonate enclosure for strike and reader retrofit
- No recessing required—installs directly to frames without structural cuts
- Polycarbonate housing resists impact, UV, and moisture in interior/covered exterior
- Open conduit back box supports 24VDC fail-secure and 12VDC fail-safe wiring
In stock · Ships same business day

$81.74 $54.99 Save $26.75

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-7520-HTR

STI STI-7520-HTR Heated Type 4X Polycarbonate Enclosure

Heated NEMA 4X polycarbonate enclosure for outdoor access control in cold climates
- Integrated heating element with thermostat maintains operation in sub-freezing temperatures
- NEMA 4X rating resists dust, rain, salt-air corrosion for coastal and washdown environments
- Impact-resistant polycarbonate with optical transparency enables visual monitoring without opening
In stock · Ships same business day

$305.50 $190.99 Save $114.51

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7520OB

STI STI-7520OB Protective Cabinet with Open Backbox and Key Lock

Key-lock protective cabinet with open backbox for access control hardware
- Open backbox design accommodates flexible wiring and component placement
- Key lock security mechanism protects mounted readers and strike plates
- Wall-mounted enclosure for entry points and controlled access zones
Special Order · Ships in 2-3 weeks

$173.11 $108.99 Save $64.12

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-7521-HTR

STI STI-7521-HTR Heated Type 4X Polycarbonate Thumb Lock Enclosure

NEMA 4X heated polycarbonate enclosure with thumb lock for frozen climates
- Integrated thermostat-controlled heating prevents condensation and ice formation
- NEMA 4 rating with IP59 sealing stops water, dust, and weather ingress
- Thumb lock strike provides mechanical backup on outdoor access control doors
In stock · Ships same business day

$305.50 $191.99 Save $113.51

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-7730

STI STI-7730 Polycarbonate Keypad Cover with Enclosed Back Box

Polycarbonate keypad cover with enclosed back box for outdoor access control
- IP-rated weatherproof enclosure protects keypads in outdoor and high-traffic indoor zones
- Enclosed back box simplifies wiring and provides integrated wall-mount support structure
- Polycarbonate construction resists moisture, dust, and temperature fluctuations at entry points
Special Order · Ships in 2-3 weeks

$76.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-8100

STI STI-8100 Smoke Detector Damage Stopper Flush Mount Strike

Flush mount strike protects door hardware in access control systems
- Flush mount design integrates seamlessly into standard door frames
- Clear protective housing maintains visibility of strike mechanism
- Tamper-resistant fasteners included for secure installation
In stock · Ships same business day

$35.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-8100-BK

STI STI-8100-BK Smoke Detector Damage Stopper Flush Mount

Flush-mount smoke detector enclosure with TCP/IP monitoring for secure access environments
- TCP/IP-enabled remote monitoring integrates with building management and security systems
- Flush mount design fits standard smoke detector installations without surface protrusion
- Tamper-resistant fasteners included; simple installation and removal for maintenance access
Special Order · Ships in 2-3 weeks

$37.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-8101

STI STI-8101 2" Conduit Spacer for STI-8100 Series

2" conduit spacer for STI-8100 series 9VDC strike systems
- Positions and aligns conduit runs in door frame and lock assemblies
- Passive mechanical component requires no independent power supply
- Compatible with STI-8100 series electric locks and strikes
Special Order · Ships in 2-3 weeks

$15.33 $9.99 Save $5.34

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-8230-SS

STI STI-8230-SS Smoke Detector Damage Stopper with Conduit Spacer

Stainless steel smoke detector guard with integrated conduit spacer
- Protects detector optics from damage during maintenance and installation
- Stainless steel resists corrosion in kitchens, laundries, and humid spaces
- Maintains airflow and optical clarity—no obstruction to smoke detection
In stock · Ships same business day

$164.50 $104.99 Save $59.51

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-9102

STI STI-9102 Small Thermostat Protector Flush Mount with Lock

Flush-mount thermostat lock for controlled HVAC access in commercial buildings
- Keyed or combination lock secures temperature controls from unauthorized adjustments
- Compact design fits standard small thermostat openings with flush wall installation
- Protects institutional and commercial HVAC systems where access must be restricted
Special Order · Ships in 2-3 weeks

$28.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
STI

SKU: STI-9105

STI STI-9105 Thermostat Protector with Key Lock

Keyed thermostat enclosure prevents unauthorized HVAC adjustments
- Mechanical key-lock design works with all standard thermostats—analog, digital, or smart
- No tools, batteries, or network setup required for wall installation
- Blocks temperature tampering in multi-tenant offices, hotels, schools, and healthcare facilities
In stock · Ships same business day

$31.64 $20.99 Save $10.65

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI STI-6931-W Call Point Stopper White Surface Mount

STI STI-7504 Snooper Stopper Clear Keypad Reader

STI STI-7510E Polycarbonate Flush-Mount Lock/Strike Enclosure

STI STI-7510F Polycarbonate Access Control Enclosure with Key Lock Strike

STI STI-7511A-HTR Heated Polycarbonate Enclosure Thumb Lock

STI STI-7511D Polycarbonate Surface-Mount Lock/Strike Enclosure

STI STI-7520-HTR Heated Type 4X Polycarbonate Enclosure

STI STI-7520OB Protective Cabinet with Open Backbox and Key Lock

STI STI-7521-HTR Heated Type 4X Polycarbonate Thumb Lock Enclosure

STI STI-7730 Polycarbonate Keypad Cover with Enclosed Back Box

STI STI-8100 Smoke Detector Damage Stopper Flush Mount Strike

STI STI-8100-BK Smoke Detector Damage Stopper Flush Mount

STI STI-8101 2" Conduit Spacer for STI-8100 Series

STI STI-8230-SS Smoke Detector Damage Stopper with Conduit Spacer

STI STI-9102 Small Thermostat Protector Flush Mount with Lock

STI STI-9105 Thermostat Protector with Key Lock

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading