IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
SDC

SKU: LRFC1R

SDC Security Door Controls LRFC1R REX Switch Kit

REX switch kit for SDC 3600 controllers, supports 63 doors and 250K users
- OSDP and TCP/IP communication with DESFire, MIFARE, NFC, and 125kHz credential support
- Handles up to 63 doors and 250,000 user records in multi-door access control systems
- Wired integration designed for mid to large-scale security deployments
Special Order · Ships in 2-3 weeks

$83.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TJ1V

SDC Security Door Controls TJ1V Top Jamb Bracket

Top jamb mounting bracket for SDC 1511/1571 door controllers
- Metal bracket assembly for overhead door frame installation
- Compatible with SDC controllers supporting OSDP communication protocol
- Structural mounting point for proximity and keypad reader integration
Special Order · Ships in 2-3 weeks

$99.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TR24

SDC Security Door Controls TR24 Plug-in Power Supply

24VDC plug-in power supply with OSDP for networked access control
- OSDP protocol integration with proximity, keypad, and NFC/13.56MHz readers
- 24VDC output supports single and multi-door enterprise deployments
- Plug-in form factor simplifies retrofit and new-installation architectures
Special Order · Ships in 2-3 weeks

$61.99 $58.99 Save $3.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: TJ2V

SDC TJ2V Top Jamb Mounting Kit for Access Control

Wired top jamb controller with NFC/13.56MHz reader and OSDP protocol
- Hard-wired connectivity eliminates batteries and wireless range issues in RF-heavy environments
- NFC/13.56MHz proximity reader mounts above doorway, reducing visible hardware on door frame
- OSDP protocol support integrates with Milestone, Genetec, Salto without vendor lock-in
In stock · Ships same business day

$162.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: TJ81V

SDC TJ81V Top Jamb Bracket for Door Control Systems

Top jamb bracket for SDC 1581/628 controllers with OSDP NFC reader
- OSDP-enabled NFC/13.56MHz proximity + keypad support in wired configuration
- Mounts at top jamb on hollow metal, aluminum, or wood frames in standard depths
- Rigid mechanical support keeps reader elevated and aligned, reducing credential read issues
In stock · Ships same business day

$114.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: UB11V

SDC UB11V Universal Bracket for 1511 Controllers

Wall-mount bracket for SDC 1511 controllers up to 63 doors
- Supports 1511 platform managing up to 250,000 user credentials
- Compatible with DESFire, MIFARE, NFC/13.56MHz, and 125kHz credentials
- OSDP and TCP/IP connectivity for wired access control networks
In stock · Ships same business day

$53.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 1575-BK

SDC/Security Door Controls 1575-BK Mounting Bracket

4-door access controller mounting bracket for enterprise HID systems
- Supports up to 250,000 users across 4-door capacity installations
- OSDP and TCP/IP network connectivity for multi-site deployments
- Works in retrofit and new-build environments with HID credential readers
Special Order · Ships in 2-3 weeks

$80.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 400U-RMB

SDC/Security Door Controls 400U-RMB 4-Door Controller with Buzzer

4-door networked controller with 250K user capacity and integrated buzzer
- Manages 4 doors with HID credential compatibility and OSDP/TCP/IP protocols
- Supports up to 250,000 user records for large-scale access management
- 24VDC powered with built-in buzzer output on 1-gang wall plate
Special Order · Ships in 2-3 weeks

$38.99 $37.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 423PUL1G

SDC/Security Door Controls 423PUL1G Pneumatic Door Controller

Pneumatic controller for up to 63 doors with 250K credential support
- Manages 63 doors from single unit with 250,000 user credentials
- Supports DESFire, MIFARE, NFC, and 125 kHz proximity cards
- Adjustable pneumatic timing 1–45 seconds; runs on 24VDC
Special Order · Ships in 2-3 weeks

$280.99 $268.99 Save $12.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 480-1SB

SDC/Security Door Controls 480-1SB Narrow Mullion Surface Box

Narrow mullion surface controller with TCP/IP and HID support
- TCP/IP networked connectivity integrates with existing access systems
- Narrow mullion profile fits tight frame widths in retrofit installations
- HID credential compatibility works with standard card readers and credentials
Special Order · Ships in 2-3 weeks

$22.99 $20.99 Save $2.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 480-2SB

SDC/Security Door Controls 480-2SB Surface Mount Box

Surface-mount controller box for TCP/IP networked door access
- HID credential reader compatibility for standard card and proximity systems
- Wired TCP/IP connectivity for centralized multi-door access management
- Includes mounting plates and surface brackets for secure installation
In stock · Ships same business day

$45.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 480-SSB

Sdc/Security Door Controls 480-SSB Surface Box Controller

TCP/IP surface-mount controller for HID card reader networks
- Wired TCP/IP connectivity integrates with networked access platforms
- HID credential support works with standard card readers and badges
- Surface box design mounts on existing frames without structural changes
In stock · Ships same business day

$46.99 $42.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 631RF

Sdc/Security Door Controls 631RF Controller Class 2 Output

Multi-door controller with 1.5A Class 2 output and OSDP support
- 1.5 Amp Class 2 output at 24VDC for reliable door control
- Open Supervised Device Protocol (OSDP) integration with access platforms
- NFC and 13.56MHz credential support for proximity and keypad readers
Special Order · Ships in 2-3 weeks

$294.99 $281.99 Save $13.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: 636RFA

SDC/Security Door Controls 636RFA 6 Amp Lock/Strike

6 amp lock strike with OSDP support for multi-credential access control
- Field-selectable 24VDC strike integrates NFC and keypad readers in one device
- OSDP protocol support connects to centralized access control systems
- Wired connectivity with 6 amp output for standard door security installations
In stock · Ships same business day

$649.99 $621.99 Save $28.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 701UL2

SDC/Security Door Controls 701UL2 Maintained Key Switch

Distributed controller for up to 63 doors with 250,000 credentials
- Supports DESFire, MIFARE, NFC, and 125 kHz proximity cards
- OSDP and TCP/IP communication for integration with existing systems
- Maintained key switch design for mid-to-large enterprise deployments
Special Order · Ships in 2-3 weeks

$105.99 $101.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 705UL1R

Sdc/Security Door Controls 705UL1R Key Switch DPDT Controller

Key switch DPDT controller for up to 63 doors with 250K user capacity
- Supports DESFire, MIFARE, NFC, and 125kHz proximity credentials in one system
- OSDP and TCP/IP communication for integration with building management platforms
- Centralized access control across medium-to-large facilities with relay logic configuration
Special Order · Ships in 2-3 weeks

$105.99 $95.99 Save $10.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

SDC Security Door Controls LRFC1R REX Switch Kit

SDC Security Door Controls TJ1V Top Jamb Bracket

SDC Security Door Controls TR24 Plug-in Power Supply

SDC TJ2V Top Jamb Mounting Kit for Access Control

SDC TJ81V Top Jamb Bracket for Door Control Systems

SDC UB11V Universal Bracket for 1511 Controllers

SDC/Security Door Controls 1575-BK Mounting Bracket

SDC/Security Door Controls 400U-RMB 4-Door Controller with Buzzer

SDC/Security Door Controls 423PUL1G Pneumatic Door Controller

SDC/Security Door Controls 480-1SB Narrow Mullion Surface Box

SDC/Security Door Controls 480-2SB Surface Mount Box

Sdc/Security Door Controls 480-SSB Surface Box Controller

Sdc/Security Door Controls 631RF Controller Class 2 Output

SDC/Security Door Controls 636RFA 6 Amp Lock/Strike

SDC/Security Door Controls 701UL2 Maintained Key Switch

Sdc/Security Door Controls 705UL1R Key Switch DPDT Controller

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service