IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMW1

Hanwha SBP-300CMW1 Aluminum Ceiling Mount

White aluminum ceiling mount for Hanwha IP cameras, TR30 thread
- Lightweight 1.5 kg design simplifies one-person installation on drop ceilings
- Compact ø180 mm footprint fits discretely above suspended ceilings
- M25 conduit hole routes cables cleanly through standard electrical sleeves
In stock · Ships same business day

$180.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HM7

Hanwha SBP-300HM7 Aluminum Hanging Mount

Aluminum ceiling hanging mount for 16+ Hanwha camera models
- Lightweight aluminum construction resists corrosion in indoor environments
- Pendant design suspends cameras vertically to hide cables in ceiling cavity
- Silver finish blends with standard corporate ceilings and light fixtures
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HM8

Hanwha SBP-300HM8 Aluminum Hanging Mount

Aluminum ceiling mount for 20+ Hanwha cameras with pitch/pan adjust
- Corrosion-resistant aluminum construction eliminates rust in humid/salty environments
- Compatible with XND, SND, and SCD series cameras across your deployment
- Pitch and pan adjustment allows fine-tuning without re-hanging the mount
In stock · Ships same business day

$49.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300HMS6

Hanwha SBP-300HMS6 Stainless Steel Cap Adaptor

Stainless steel cap adaptor for XNV-6080RS, XNV-8080RS, XNV-6120RS cameras
- Stainless steel construction resists corrosion in outdoor and indoor environments
- Protects camera optics from weather, UV exposure, dust, and physical damage
- Compatible with three Hanwha professional surveillance camera models
Special Order · Ships in 2-3 weeks

$485.00 $363.99 Save $121.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300HMW5

Hanwha SBP-300HMW5 White Hanging Mount

Aluminum ceiling mount with 1-1/2" PF thread for indoor/outdoor
- 1-1/2" pipe fitting thread compatible with standard Hanwha cameras
- Lightweight aluminum construction at 200g resists corrosion outdoors
- White finish blends with suspended ceilings and standard drywall
In stock · Ships same business day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300KM1

Hanwha SBP-300KM1 Corner Mount Base

Compact aluminum corner mount for outdoor surveillance in tight spaces
- Aluminum construction resists corrosion in coastal and industrial environments
- Slim 185×115×40mm footprint fits building corners without obstructing sightlines
- Lightweight at 1.65 lbs for easy one-person installation on masonry or concrete
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300KMS

Hanwha SBP-300KMS Stainless Steel Corner Mount

Stainless steel corner mount with IP66 weatherproof rating for tight spaces
- IP66 rated for dust and moisture protection in outdoor surveillance
- Stainless steel construction resists corrosion in harsh environments
- Compatible with SBP-300WMS and SBP-300WMS1 camera models
Special Order · Ships in 2-3 weeks

$150.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300KMW1

Hanwha SBP-300KMW1 Corner Mount Base

Corner mount for Hanwha IP cameras in tight architectural spaces
- Aluminum alloy construction rated -50°C to 50°C for indoor and outdoor
- Compact 228.5 x 173.5 x 91.2 mm footprint fits flush in corner pockets
- Compatible with Hanwha Techwin X, Q, P series and Wisenet IP cameras
In stock · Ships same business day

$79.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300LMB

Hanwha SBP-300LMB Long Arm Wall Mount Black

Long arm wall mount for PTZ and dome cameras with extended reach
- Extended standoff design positions cameras away from mounting surface
- Black powder-coated steel construction rated -50°C to +60°C operating range
- Wall-mounted installation compatible with Hanwha PTZ and dome camera models
Special Order · Ships in 2-3 weeks

$395.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300NB

Hanwha SBP-300NB Installation Box IP66 Weatherproof Enclosure

IP66 weatherproof box for SBP-300 modular cameras in outdoor sites
- IP66 rated; blocks dust and withstands high-pressure water jets
- Hybrid steel/aluminum construction at 3.4 kg enables single-person mount
- Compact 185×221×94.3 mm footprint fits tight wall and soffit spaces
In stock · Ships same business day

$300.00 $224.99 Save $75.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300NM

Hanwha SBP-300NM Housing & Mount for TNB-6030

Compact housing & mount for TNB-6030 wall or ceiling installation
- Aluminum construction with ivory finish blends into retail, banking, and public spaces
- Wall and ceiling mounting options with included hardware for flexible camera positioning
- Purpose-built for TNB-6030 compatibility with discreet, minimal visual footprint
Special Order · Ships in 2-3 weeks

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300PM1

Hanwha SBP-300PM1 Pole Mount Base

Aluminum pole mount for Hanwha dome and PTZ cameras, outdoor-rated
- Aluminum construction resists rust and corrosion in coastal and humid environments
- Compact 185 × 115 × 40 mm footprint mounts flush to standard poles without bulk
- Lightweight 750 g design allows one-person installation on high-pole deployments
In stock · Ships same business day

$79.00 $52.99 Save $26.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300PMS

Hanwha SBP-300PMS Stainless Steel Pole Mount

Stainless steel pole mount for 80mm+ pillars with outdoor durability
- Stainless steel construction resists corrosion in outdoor environments
- Adjustable positioning with steel straps for stable camera angle setup
- Fits cylindrical pillars 80mm diameter or larger for flexible placement
Special Order · Ships in 2-3 weeks

$110.00 $82.99 Save $27.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300PMW2

Hanwha SBP-300PMW2 Pole Mount Base

White aluminum pole mount base for Hanwha cameras, 80mm+ poles
- Stainless steel straps resist corrosion; M10 screw fits standard housings
- M25 cable conduit routes power and network cables through mount base
- Lightweight aluminum (750g) with RAL9003 white powder coat for outdoor use
In stock · Ships same business day

$79.00 $52.99 Save $26.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WM

Hanwha SBP-300WM PTZ Wall Mount Gooseneck

Flexible gooseneck wall mount for Hanwha PTZ cameras indoors and out
- 360-degree rotation and multi-axis tilt for precise camera positioning
- Direct compatibility with Hanwha PTZ camera line, no adapters needed
- Durable construction rated for indoor and outdoor temperature swings
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300WMS

Hanwha SBP-300WMS Stainless Steel Gooseneck Wall Mount

Stainless steel gooseneck wall mount for coastal and corrosive environments
- Flexible gooseneck design allows precise angle adjustment for optimal positioning
- Stainless steel construction resists corrosion in coastal, industrial, and chemical settings
- Compatible with Hanwha stainless steel camera models for integrated surveillance systems
Special Order · Ships in 2-3 weeks

$625.00 $468.99 Save $156.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBP-300CMW1 Aluminum Ceiling Mount

Hanwha SBP-300HM7 Aluminum Hanging Mount

Hanwha SBP-300HM8 Aluminum Hanging Mount

Hanwha SBP-300HMS6 Stainless Steel Cap Adaptor

Hanwha SBP-300HMW5 White Hanging Mount

Hanwha SBP-300KM1 Corner Mount Base

Hanwha SBP-300KMS Stainless Steel Corner Mount

Hanwha SBP-300KMW1 Corner Mount Base

Hanwha SBP-300LMB Long Arm Wall Mount Black

Hanwha SBP-300NB Installation Box IP66 Weatherproof Enclosure

Hanwha SBP-300NM Housing & Mount for TNB-6030

Hanwha SBP-300PM1 Pole Mount Base

Hanwha SBP-300PMS Stainless Steel Pole Mount

Hanwha SBP-300PMW2 Pole Mount Base

Hanwha SBP-300WM PTZ Wall Mount Gooseneck

Hanwha SBP-300WMS Stainless Steel Gooseneck Wall Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading