IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Hanwha

SKU: SBP-187WMW

Hanwha SBP-187WMW White Wall Pole Mount

Wall and pole mount for TNO-7180RLP LPR cameras in outdoor traffic monitoring
- Aluminum construction with white powder coat resists corrosion in outdoor environments
- Supports both wall and pole installation for flexible camera positioning
- M25 conduit hole routes cables; TR30 mount secures camera to bracket
Special Order · Ships in 2-3 weeks

$150.00 $112.99 Save $37.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-200C

Hanwha SBP-200C Mounting Hole Cover Mount Plate

White polycarbonate cover plate for wall & pole mounts, pack of 5
- ø211 mm diameter fits standard Hanwha mount hole patterns without trimming
- UV-resistant polycarbonate weatherproofing rated IP66 for outdoor installations
- 87g per unit, minimal load; white RAL 9003 finish blends into building surfaces
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-215C

Hanwha SBP-215C Mounting Hole Cover Plate Pack (5-Pack)

White polycarbonate cover plates for Hanwha dome camera brackets (5-pack)
- Snap-fit or adhesive installation—no tools required for fast mounting
- RAL 9003 white finish matches standard ceiling tiles and walls seamlessly
- 225.66 mm × 145.66 mm plates sized to fit SBP-250WMW and SBP-400WMW brackets
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-215HMWB

Hanwha SBP-215HMWB Hanging Cap Adapter

Ceiling hanging adapter for SPS-A100M with vibration isolation
- TR20 screw connection secures to ceiling with 3 kg load capacity
- Integrated gasket reduces mechanical noise for clearer audio output
- Aluminum core with ASA weather-resistant cap in white finish
Special Order · Ships in 2-3 weeks

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-250C

Hanwha SBP-250C Mounting Hole Cover Pack of 5

White polycarbonate hole covers for Hanwha dome mounts, pack of 5
- ø263 mm diameter covers fit SBP-250WMW and SBP-400WMW wall/pole mounts
- Polycarbonate construction resists UV and yellowing in indoor/covered outdoor use
- 29.2 g per unit adds negligible weight to camera mounting hardware
In stock · Ships same business day

$30.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-250HMW

Hanwha SBP-250HMW White Cap Adapter

White aluminum cap adapter for Hanwha PNM ceiling-mount cameras
- PF 1 1/2" male thread mounts directly to conduit and junction boxes
- Aluminum construction resists vibration and temperature cycling
- White finish blends into light ceilings; works with PNM-9084QZ/QZ1/C16083RVQ/C32083RVQ
In stock · Ships same business day

$75.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-250WMW

Hanwha SBP-250WMW Wall and Pole Mount Bracket

Dual wall and pole mount bracket, 20 kg capacity, outdoor-rated
- Wall or pole installation with single bracket—no adapter plates needed
- 20 kg load capacity fits bullet, turret, and compact box cameras
- Polycarbonate and aluminum construction resists UV and impact damage
In stock · Ships same business day

$160.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-250WMWS

Hanwha SBP-250WMWS White Wall Mount Bracket

White wall bracket for Hanwha Wisenet Q-series dome cameras
- Direct mounting for Q-series domes; adapter-compatible with XNP and larger housings
- Aluminum and polycarbonate construction in white finish for indoor deployment
- Supports gang plate and hanging adapters for flexible multi-camera setups
Special Order · Ships in 2-3 weeks

$600.00 $465.99 Save $134.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-2CTW1

Hanwha SBP-2CTW1 White Suspended Ceiling Tile for Pendant Mount

White suspended ceiling tile for Hanwha pendant mounts, 60 lb capacity
- 1.5" NPT female thread fits all Hanwha pendant mounts and schedule 40 columns
- Cold rolled steel with scratch-resistant epoxy finish resists wear in any ceiling
- Pre-drilled knockouts for electrical boxes speed up in-ceiling installation
Special Order · Ships in 2-3 weeks

$150.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300BW1

Hanwha SBP-300BW1 Tabletop Mount

White aluminum tabletop mount for fixed indoor camera positioning
- Compact 120 x 190.9 x 35mm footprint fits tight desks and shelves
- 700g lightweight aluminum body eliminates vibration for steady LPR shots
- TR30 screw interface with M25 conduit hole for cable management
In stock · Ships same business day

$50.00 $33.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CM

Hanwha SBP-300CM Pendant Mount for Surveillance Cameras

12-inch aluminum pendant mount for Hanwha ceiling cameras
- 12-inch standoff clears drop ceilings, ductwork, and sprinkler heads
- 1½" female thread matches standard Hanwha camera adapters
- Aluminum construction with ivory finish resists corrosion indoors/outdoors
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300CMB

Hanwha SBP-300CMB Pendant Mount Accessory

Black matte pendant mount for Hanwha ceiling camera installations
- Aluminum construction rated for indoor environments -50°C to +60°C
- Matte black finish minimizes reflections in surveillance deployments
- Compatible with Hanwha camera systems for secure overhead suspension
Special Order · Ships in 2-3 weeks

$114.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMI

Hanwha SBP-300CMI White Pendant Mount

White pendant mount for overhead camera installation, ø140 × 305mm
- Aluminum construction with RAL9003 white powder coat resists corrosion
- 305mm drop length positions cameras to avoid ceiling glare and washout
- M10 universal thread compatible with SBP-120HMW, 140HMW, 160HMW1, 180HMW1
In stock · Ships same business day

$90.00 $60.99 Save $29.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-300CMP

Hanwha SBP-300CMP Ceiling Mount Pipe

300mm aluminum ceiling pipe for flexible camera height adjustment
- 300mm extension length with M6 screw connection for SBP-140CMB/180CMB bases
- Lightweight aluminum construction at 560g simplifies installation and handling
- Stackable design allows multiple pipes to extend mounting reach as needed
Special Order · Ships in 2-3 weeks

$65.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMTS

Hanwha SBP-300CMTS Telescopic Ceiling Mount with Swivel Ball Head

Telescopic ceiling mount with ±45° swivel ball head for flexible camera angles
- Adjustable height from 37.7 to 65.7 inches; extends to 99.4 inches with coupler
- Swivel ball head allows ±45° pan and tilt without rotating the entire mount
- 20 kg load capacity handles most indoor surveillance cameras and compact PTZ units
In stock · Ships same business day

$440.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMTW

Hanwha SBP-300CMTW Telescopic Ceiling Mount

Telescopic aluminum ceiling mount, 3–5 ft range, 20 kg capacity
- Extends 956.5–1,667.5 mm to fit variable ceiling heights without restocking
- Aluminum construction with white powder coat resists corrosion in retail/warehouse
- M25 conduit hole routes cables vertically for clean, trip-hazard-free install
In stock · Ships same business day

$279.00 $208.99 Save $70.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Hanwha SBP-187WMW White Wall Pole Mount

Hanwha SBP-200C Mounting Hole Cover Mount Plate

Hanwha SBP-215C Mounting Hole Cover Plate Pack (5-Pack)

Hanwha SBP-215HMWB Hanging Cap Adapter

Hanwha SBP-250C Mounting Hole Cover Pack of 5

Hanwha SBP-250HMW White Cap Adapter

Hanwha SBP-250WMW Wall and Pole Mount Bracket

Hanwha SBP-250WMWS White Wall Mount Bracket

Hanwha SBP-2CTW1 White Suspended Ceiling Tile for Pendant Mount

Hanwha SBP-300BW1 Tabletop Mount

Hanwha SBP-300CM Pendant Mount for Surveillance Cameras

Hanwha SBP-300CMB Pendant Mount Accessory

Hanwha SBP-300CMI White Pendant Mount

Hanwha SBP-300CMP Ceiling Mount Pipe

Hanwha SBP-300CMTS Telescopic Ceiling Mount with Swivel Ball Head

Hanwha SBP-300CMTW Telescopic Ceiling Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading