HID · 3151RGGMNM

HID Iclass Prox, Prog Iclass/prox

• Reads both 125 kHz Prox and 13.56 MHz iClass credentials through one reader body.
• Wiegand output integrates directly with existing access control panels without adapters.
• Ships pre-programmed to customer reader profile, reducing on-site configuration time.

HID · 3152RG1MNM

HID Iclass Prox, Prog Iclass/prox

• Reads both 125 kHz Prox and 13.56 MHz iClass credentials through one reader body.
• Wiegand output integrates directly with existing access control panels without adapters.
• Pre-programmed to customer reader profile, reducing on-site configuration steps at install.

HID · 3152RGGMNN

HID Iclass Prox, Prog Iclass/prox

• Reads both 125 kHz Prox and 13.56 MHz iClass credentials through one reader body.
• Wiegand output integrates directly with existing access control panels without conversion.
• Ships pre-programmed to customer reader profile, reducing on-site configuration time.

HID · 3150VGGNNN

HID Iclass SE Prox ER Config - 3150VGGNNN

When your project demands simultaneous support for legacy proximity and modern smart card credentials at extended read ranges, this multi-technology

• Reads both 125 kHz HID Prox and 13.56 MHz iCLASS SE credentials from one reader.
• SIO encryption and mutual authentication meet current access control security mandates.
• Composite construction rated -40 to 158°F supports exterior and harsh-environment installs.

HID · 2000HPGGMN

HID Iclass SR 2K/2 Prgmd F-gloss B-gloss Match # NO Slot LAM Lifetime Warrant - 2000HPGGMN

N iClass SR proximity card designed for RF-based access control deployments

• RF-only operation eliminates slot wear; no physical insertion required at reader.
• 137+ billion unique code combinations support formats up to 85 bits for large deployments.
• Laminated, passive design requires no battery and resists cracking in high-traffic use.

HID · 3150PGGMVN

HID Iclass/prox Prog Iclass Non-p. Prox - 3150PGGMVN

• Dual-frequency 125 kHz + 13.56 MHz iCLASS SE/Prox composite supports mixed-reader environments.
• Non-proximity configuration prevents unintended Prox reader triggers in multi-reader doorways.
• 2 KB SIO-encoded memory with 26-bit H10301 format integrates into existing HID platforms.

HID · 20NKS-00-00P6G3

HID Igno 20 Blk/slvr - 20NKS-00-00P6G3

When you're deploying mobile credentials and need a physical backup or bridge solution for mixed-credential environments, the HID Igno 20 delivers a

• Reads 125 kHz and 13.56 MHz credentials plus BLE/NFC mobile access in one reader.
• OSDP v2 Secure Channel and Wiegand outputs support both modern and legacy controller wiring.
• IP65-rated housing operates from -31°F to 150°F for indoor or outdoor deployment.

HID · 1386NGGNH

HID Isoprox II Non-prog F-gloss B-gloss - 1386NGGNH

Non-programmable Isoprox II proximity access card designed for facilities relying on HID proximity reader infrastructure

• Passive 125 kHz HID proximity format; no battery or reprogramming overhead.
• Compatible with any HID proximity reader — no reader-specific pairing required.
• Supports formats up to 85 bits, yielding over 137 billion unique credential codes.

HID · 1386NGGNN

HID Isoprox II Non-prog F-gloss B-gloss - 1386NGGNN

Non-programmed Isoprox II proximity access card—a passive, durable credential for any access control system already running HID proximity readers

• Passive proximity card works with all HID proximity readers—no active power required.
• Supports up to 85-bit formats with 137B+ unique codes, preventing ID collision at scale.
• Non-programmed credential lets you assign card identity in your PACS software post-issuance.

HID · 1386LGGAH

HID Isoprox II Prog Engraved Match Hzntl - 1386LGGAH

• Passive 125 kHz card works with all HID proximity readers—no hardware changes needed.
• Supports formats up to 85 bits with 137B+ unique codes for large enterprise deployments.
• Engraved matching number simplifies user administration and card-to-ID cross-referencing.

HID · 1386LGGAN

HID Isoprox II Prog F-gloss B-gloss Engr - 1386LGGAN

When you're deploying access control for clients who need both security and professional presentation, credential quality matters

• Ships pre-programmed with 26-bit H10301 format for drop-in use with installed HID Prox readers.
• Dual-gloss PVC composite construction withstands -40°F to 158°F for indoor and harsh-entry deployments.
• 0.033 in ISO thickness fits standard badge holders; dye-sublimation print-ready for photo ID integration.

HID · 1386LGGAV

HID Isoprox II Prog F-gloss B-gloss Engr - 1386LGGAV

Programmed Isoprox II proximity access card—a passive, wallet-sized credential for door access control integration

• HID Isoprox II proximity access card — programmed credential
• Wallet-sized passive card for door access control integration
• Front gloss and back gloss finish with engraving area

HID · 1386LGGMH

HID Isoprox II Prog F-gloss B-gloss Matc - 1386LGGMH

N ISOProx II proximity card programmed with plain gloss front and back, sequential matching, and horizontal slot configuration

• Works with all HID proximity readers—no firmware updates or provisioning software needed.
• Sequential matching cross-reference links card numbers to programmed IDs for audit accuracy.
• At 6.8 g, fits standard wallet and badge holders without adding bulk to daily carry.

HID · 1386LGGMN

HID Isoprox II Prog F-gloss B-gloss Matc - 1386LGGMN

N RF-programmable Isoprox II proximity credential — a passive, wallet-sized card that pairs with any HID proximity reader to control access doors

• Passive RF design requires no battery, ensuring consistent read performance over card lifetime.
• Encodes 137 billion+ unique codes, eliminating credential collisions in large multi-site deployments.
• High-gloss PVC construction on both faces supports photo ID overlay and resists daily wear.

HID · 1386LGGMV

HID Isoprox II Prog F-gloss B-gloss Matc - 1386LGGMV

N ISOProx II proximity card — a passive RF credential for personnel access control systems

• RF-programmable passive card requires no battery, eliminating maintenance overhead.
• Supports up to 85-bit formats with 137 billion unique codes for large multi-site deployments.
• Sequential vertical-slot-punch format ships in 100-card batches, simplifying bulk provisioning.

HID · 1386LGGNH

HID Isoprox II Prog F-gloss B-gloss NO # - 1386LGGNH

N RF-programmable Isoprox II proximity card — the industry standard for cost-effective physical access control credentials

• Passive RF card requires no battery and programs via standard HID readers or programmers.
• Supports formats up to 85 bits with 137B+ unique codes, eliminating credential collision risk.
• Gloss/gloss finish with no printed card number limits identifier exposure in sensitive environments.

HID · 1386LGGNV

HID Isoprox II Prog F-gloss B-gloss NO # - 1386LGGNV

N RF-programmable proximity card built for cost-effective access control deployments across commercial, industrial, and institutional facilities

• Passive, battery-free design eliminates maintenance cycles and supports infinite shelf life.
• Supports formats up to 85 bits, yielding 137B+ unique codes for large multi-facility rollouts.
• Compatible with any standard HID proximity reader; no specialized hardware required at commissioning.

HID · 1386LGGSN

HID Isoprox II Prog F-gloss B-gloss SEQ - 1386LGGSN

Passive RF-programmable proximity card credential designed for organizations running HID proximity reader infrastructure

• Supports up to 85-bit encoding with 137B+ unique codes, eliminating collision risk at scale.
• Passive RF design requires no battery, eliminating credential maintenance across deployment life.
• Gloss front/back finish with lamination supports photo ID printing and embossing out of the box.

HID · 1386LGGSV

HID Isoprox II Prog F-gloss B-gloss SEQ - 1386LGGSV

N RF-programmable proximity access card designed as a low-cost, passive credential for facilities using HID proximity reader infrastructure

• Passive RF design eliminates battery replacement, delivering infinite operational lifespan.
• Over 137 billion unique codes across 85-bit formats prevent credential collision at scale.
• RF-programmable ID assignment simplifies issuance and revocation via cross-reference lists.

Kantech · HID-C1386K/G

HID Kantech ISOProx II Dye Sub Card KSF

HID ISOProx II proximity card with full-color dye sub printing

• HID ISOProx II 125kHz dye-sub card with KSF format
• 26-bit Wiegand for multiCLASS and legacy 125kHz readers
• Dye-sublimation printable surface for branded badges

HID · L000825

HID L000825 Ribbon Film Loading Label

Ribbon cartridge identification label for HID card printer systems

• Provides clear cartridge identification to reduce loading errors during ribbon replacement.
• Consumable accessory with no warranty — budget and stock accordingly for ongoing printer maintenance.
• Manufactured in the US; designed specifically for HID card printer system environments.

HID · MDP-00103

HID MDP-00103 DTC4500E Supply Pack Assembly

Complete mounting kit assembly for HID DTC4500E proximity readers

• Bundles all brackets and fasteners for DTC4500E installs — no secondary hardware orders needed.
• Supports surface-mount and recessed orientations on both metal and wood commercial door frames.
• Ships pre-assembled with Wiegand/relay interfaces ready; no calibration required before mounting.

HID · MDP-00870

HID MDP-00870 Bluetooth Smart Module

Bluetooth Smart module for mobile access control with enterprise encryption

• IP55-rated for outdoor deployments; operates from -31°F to 150°F.
• FIPS-201 FASC-N compliant encryption blocks credential cloning and replay attacks.
• Reads Mifare and DESFire EV1 cards, preserving existing card inventory on retrofit installs.

HID · MDP-03891

HID MDP-03891 Gray Card Cartridge Assembly

Gray card cartridge for HID printers—minimizes jams and misfeeds

• IP55-rated assembly resists dust and card debris in active production environments.
• Field-replaceable drop-in design eliminates technician dispatch and minimizes downtime.
• Precision mechanical tolerances reduce jam events across high-volume card issuance runs.

HID · 1391LGSMN

HID Microprox TAG Prog Gray Match # - 1391LGSMN

Programmable Microprox tag credential in gray finish

• Field-programmable read-write credential eliminates manufacturer returns for card data changes.
• Integrates directly with HID proximity readers without additional middleware or hardware.
• Minimum 100-unit order supports volume deployments; credentials ship factory-new and unprogrammed.

HID · 1391LSSMN

HID Microprox TAG Prog Gray Match # - 1391LSSMN

Pre-programmed Microprox proximity tag in gray, configured for sequential matching

• Ships factory-programmed for plug-and-play enrollment into HID proximity reader systems.
• Sequential matching simplifies bulk credential tracking by badge stock range in enterprise deployments.
• Operates at 125 kHz EM for reliable compatibility with standard HID Microprox readers.

HID · 1391LSSNN

HID Microprox TAG Prog Gray NO # - 1391LSSNN

Programmable Microprox tag credential in gray, designed as a standalone access token for integration with HID badge reader systems

• Programmable Microprox TAG integrates with HID PACS for non-card credential deployments.
• Peel-off self-adhesive backing enables direct mounting to badges, surfaces, or equipment.
• Ships in minimum 100-unit quantities, supporting high-volume organizational rollouts.

HID · 1435NSSNN

HID Mifare ADH TAG 1K Non-prog F- STD A - 1435NSSNN

When you need reliable, cost-effective proximity credentials for MIFARE-based access control deployments, non-programmable adhesive tags deliver fast

• 13.56 MHz ISO 14443A interface ensures compatibility with existing MIFARE readers.
• Non-programmed format ships ready for immediate enrollment—no pre-config step needed.
• Rated -40 to 158 °F; adhesive construction mounts to curved or irregular surfaces.

HID · 1435MSSMN

HID Mifare ADH TAG 1K Prog F- STD HID - 1435MSSMN

When you're deploying mixed credential environments or migrating from legacy proximity systems to contactless smart card infrastructure, you need

• Adhesive form factor adds 13.56 MHz smart card capability to existing badges without replacement.
• 1 KB EEPROM supports programmable sectors for custom facility codes and multi-application use.
• Rated -40 to 158°F enables reliable deployment across cold storage, loading docks, and outdoor areas.

HID · 1434NSSNN

HID Mifare Keyfob 1K Non-prog F- STD H - 1434NSSNN

When you need a cost-effective credential for large-scale deployments where card programming happens at the reader level rather than during

• Ships non-programmed so you stage inventory in bulk and encode rights at the reader.
• 13.56 MHz MIFARE Classic 1K with 1 KB EEPROM across 16 sectors suits tiered access zoning.
• Rated –40 to 70 °C keeps credentials operational in unheated warehouses or outdoor kiosks.

HID · 1430NGGNV

HID Mifare Non-prog - 1430NGGNV

• Factory-encoded MIFARE Classic 1K eliminates field programming and blocks credential tampering.
• 13.56 MHz ISO 14443A operation ensures fast reads across standard MIFARE reader infrastructure.
• Rated –40 to 158 °F and dye-sublimation printable for harsh-environment badged deployments.

HID · 1430MGGMN

HID Mifare Prog HID 13.56M - 1430MGGMN

• 13.56 MHz MIFARE Classic 1K enables on-site encoding, eliminating factory pre-programming delays.
• 1 KB EEPROM supports site-specific cardholder data and granular access permission storage.
• Rated -40 to 158°F and dye-sublimation printable for durable, photo-ID-ready deployments.

HID · 1431LGGUNM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGUNM

When your access control deployment requires flexible credential technology that bridges legacy prox systems with modern secure authentication, you

• Dual 125 kHz / 13.56 MHz operation lets one card work legacy prox and MIFARE readers.
• 26-bit H10301 format ensures drop-in compatibility with existing HID proximity infrastructure.
• Dye-sublimation print-ready PVC composite supports direct badge personalization on standard printers.

HID · 1431LGGUVM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGUVM

When you're managing a multi-technology access control deployment with both legacy proximity readers and newer Mifare systems, credential management

• Dual 125 kHz / 13.56 MHz operation lets one card serve both legacy Prox and MIFARE readers.
• Fixed 26-bit H10301 Prox side preserves existing facility codes with no reprogramming required.
• Dye-sublimation print capability supports on-site photo ID badging in standard CR80 format.

HID · 1431LGGVNM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGVNM

Managing access control systems that bridge legacy proximity and MIFARE technology creates deployment headaches when you need credentials that work

• Operates on both 125 kHz prox and 13.56 MHz MIFARE Classic 1K readers simultaneously.
• Ships pre-encoded with 26-bit H10301 format; MIFARE sector is field-programmable for custom data.
• CR80 PVC composite form factor supports dye-sublimation printing and fits standard badge holders.

HID · 1431LGGZNM

HID Mifare Prox Non-prog Mifare Prog Prox - 1431LGGZNM

When you're integrating access control systems that need to bridge legacy proximity hardware with newer Mifare-based platforms, dual-technology

• Dual 125 kHz prox and 13.56 MHz MIFARE Classic 1K in one card enables phased migrations.
• Pre-encoded 26-bit H10301 prox side deploys immediately with existing HID proximity readers.
• Rated -40 to 158°F and dye-sublimation printable for durable, photo-ID-ready badging.