Electric Strikes
Showing Results for Electric Strikes
-
SDC
SKU: 45-4RVRMB
SDC 45-4RVRMB Electric Strike 12/24 VDC
Electric strike for HID reader systems, 12/24 VDC wired TCP/IP
- 12/24 VDC field-selectable on-site eliminates dual-SKU inventory across multi-site deployments.
- Non-handed mount with four interchangeable faceplates cuts retrofit labor on mismatched jambs.
- Built-in LS and KS status outputs feed real-time door state to your access control panel.
$244.00 $143.99 Save $100.01The item has been added -
SDC
SKU: 45-4SU
SDC 45-4SU Electric Strike 24VDC Networked Access Control
24VDC electric strike with TCP/IP networking for HID access control
- TCP/IP connectivity eliminates intermediate control modules, simplifying multi-door deployments.
- Native HID credential support streamlines enrollment and revocation within existing HID ecosystems.
- Lifetime warranty and 24VDC input reduce long-term maintenance cost and power retrofit complexity.
$188.00 $114.99 Save $73.01The item has been added -
SDC
SKU: 45-7RV
SDC 45-7RV Dual-Voltage Electric Strike
Networked electric strike with dual-voltage operation for retrofit and new builds
- Dual-voltage 12/24VDC input eliminates stocking separate strike variants per site.
- TCP/IP connectivity integrates directly into IP access control platforms without relay modules.
- HID credential compatibility confirmed; lifetime warranty reduces long-term replacement risk.
$209.00 $123.99 Save $85.01The item has been added -
SDC
SKU: 45-A
SDC 45-A Electric Strike 24VDC Access Control
24VDC electric strike for HID access control with fail-safe/secure modes
- Runs on 24VDC, dropping cleanly into existing access control power architectures.
- Native HID compatibility eliminates gateway hardware in credential-based deployments.
- Field-configurable fail-safe or fail-secure mode to match code and risk requirements.
$222.00 $135.99 Save $86.01The item has been added -
SDC
SKU: 45F-4SU
SDC 45F-4SU Electric Strike 4-Door 12/24VDC
4-door electric strike with OSDP/TCP/IP for networked access control
- Controls 4 independent strike outputs from one unit, cutting panel count by 75%.
- Native OSDP and TCP/IP eliminate gateway middleware for faster, lower-risk deployment.
- Dual 12/24VDC input and 250,000 user capacity suit large mixed-voltage facilities.
$472.00 $277.99 Save $194.01The item has been added -
SDC
SKU: 55-BU
SDC 55-BU Mortise Lockset and Electric Strike
Mortise lockset with 24VDC electric strike, OSDP/TCP/IP wired control
- OSDP and TCP/IP wired protocols enable real-time credential validation over existing LAN.
- Supports up to 250,000 credentials per controller, eliminating database constraints at scale.
- Single controller manages up to 4 doors; 24VDC input fits standard access control power.
$540.00 $317.99 Save $222.01The item has been added -
SDC
SKU: 55-FU
SDC 55-FU Electric Strike 24VDC 4-Door Access Control
24VDC electric strike for 4-door networked access control
- Controls up to 4 doors from one unit, reducing controller count and install labor.
- Native OSDP over TCP/IP encrypts every reader transaction without middleware translation.
- Supports 250,000 users with HID credentials and carries a lifetime warranty.
$566.00 $345.99 Save $220.01The item has been added -
SDC
SKU: EH201224A
SDC EH201224A Semi-Flush Electric Strike
Semi-flush strike for 20-door deployments with 250K user capacity
- Manages credentials across up to 20 doors from a single control logic chain.
- Stores 250,000 user identities onboard, eliminating backend lookups at unlock.
- Accepts DESFire, MIFARE, NFC, and 125kHz prox on shared reader infrastructure.
$132.00 $80.99 Save $51.01The item has been added -
SDC
SKU: EH301224A
SDC EH301224A Surface Mount Electric Strike Lock
Surface mount electric strike for 30-door access control systems
- Surface mount form factor eliminates frame modification, simplifying retrofit deployments.
- Operates on 24VAC from standard low-voltage supplies already common in access control panels.
- Scales to 30 doors per system, covering small-to-mid-size facility access control needs.
$191.00 $116.99 Save $74.01The item has been added -
SDC
SKU: 55-CU
SDC Security Door Controls 55-CU Electric Strike 12/24V
630 lbs electric strike with 12/24V dual voltage for access control
- 630 lb holding force exceeds ANSI/BHMA A156.3 for high-traffic perimeter doors.
- Dual 12/24VDC input eliminates strike family splits across legacy and modern deployments.
- OSDP and TCP/IP support up to 4 doors and 250,000 users without vendor lock-in.
$540.00 $317.99 Save $222.01The item has been added -
SDC
SKU: Z7250G5QIC7PKA
SDC Z7250G5QIC7PKA 7250 12/24VDC Electric Strike
12/24VDC electric strike for 63-door enterprise access control
- Controls up to 63 doors from one networked controller, reducing hardware sprawl.
- Stores 250,000 credentials across DESFire, MIFARE, NFC, and 125kHz Prox formats.
- Native OSDP and TCP/IP eliminate translation gateways for direct VMS integration.
$611.00 $373.99 Save $237.01The item has been added -
SDC
SKU: Z7252EQ6PKD
SDC Z7252EQ6PKD 7252 Electric Strike Lock 12/24VDC
Networked electric strike for 63-door deployments, 12/24VDC
- Manages 250,000 users across 63 networked doors from a single credential database.
- OSDP and TCP/IP dual-protocol support ensures compatibility with Genetec, Salto, and Milestone.
- Accepts DESFire, MIFARE, NFC, and 125kHz prox cards—no reader swap needed during migration.
$514.00 $313.99 Save $200.01The item has been added -
SDC
SKU: Z7252GQ
SDC Z7252GQ Failsecure Electric Strike with REX Output
Failsecure electric strike, 24VDC, supports 250K users across 63 doors
- Failsecure latch locks on power loss, preserving fire-door and egress code compliance.
- Integrated REX output eliminates external relay modules, reducing wiring and cabinet space.
- Field-selectable 12/24 VDC supports legacy and modern circuits without hardware changes.
$514.00 $313.99 Save $200.01The item has been added -
SDC
SKU: Z7550LRCHLG
SDC Z7550LRCHLG 24VDC Electric Strike Lock
24VDC electric strike for networked access control up to 63 doors
- Failsafe 24VDC solenoid strike keeps door latched on power loss for safe egress control.
- All wiring stays in the door frame, preserving fire ratings and simplifying code compliance.
- Supports LHR handing with adjustable wide-gap fit for 1-1/4" to 2" frame face widths.
$1,309.00 $799.99 Save $509.01The item has been added -
SDC
SKU: 15-4S24U
SDC/Security Door Controls 15-4S24U 4-Door Electric Strike
4-door electric strike with OSDP/TCP/IP for networked access control
- Controls up to 4 independent doors from a single 12VDC wired power run.
- Failsecure latch stays locked on power loss, meeting secured-perimeter requirements.
- OSDP and TCP/IP support integrates natively with HID readers and access panels.
$107.00 $65.99 Save $41.01The item has been added -
SDC
SKU: 30-4-24UFS
SDC/Security Door Controls 30-4-24UFS Electric Strike
24VDC electric strike for HID access control on standard doors
- 24VDC failsecure design defaults to locked on power loss, meeting fire-code requirements.
- 250 mA draw cuts panel load vs. 12VDC variants, reducing voltage-drop risk in multi-strike runs.
- 500,000-cycle solenoid rating supports continuous-duty high-traffic corridors without early replacement.
$1,170.00 $688.99 Save $481.01The item has been added
Electric Strikes
Electric strikes replace the fixed strike plate in a door frame with an electromechanical unit that releases on command, allowing a door to be pushed or pulled open without retracting the latch bolt. They are the default door control device on most commercial access control openings.
Plan Your Deployment
- Fail-safe (unlocks on power loss) vs. fail-secure (stays locked)
- Voltage (12/24 VDC or 12/24 VAC) and current draw (holding and inrush)
- Frame material: hollow metal, aluminum, or wood
- ANSI/BHMA grade and static strength rating
- Latch monitoring, door position, and tamper signals required
What to Look For
Fail-secure is the standard on most interior commercial openings; fail-safe is required on stair doors, areas of refuge, and egress paths where local code demands free exit. Match voltage to the existing door control panel. ANSI Grade 1 strikes are rated for the heaviest commercial cycles and are recommended on high-traffic doors.
Common Deployment Scenarios
Electric strikes are used on perimeter storefronts, tenant entries, office suite doors, and interior security-zone doors. They are commonly paired with a request-to-exit sensor and door position contact to complete the opening monitoring required by audit trails.