Refine by

No filters applied

Sub categories

Cellular Communicators

12 items

Intrusion Panels

33 items

Keypads & Touchscreens

34 items

Motion & Glass Break Detectors

67 items

Sirens & Sounders

12 items

Wireless Sensors

52 items

Access Cards & Credentials

22 items

Access Hubs & Controllers

21 items

Card Readers

54 items

Control Systems

258 items

Credentials

656 items

Door Controllers

139 items

Door Hardware & I/O

1530 items

Door Locks & Strikes

325 items

Showing Results for Access Control

Compare

Out of stock
HES

SKU: 851M-630

HES 851M-630 Faceplate Satin Stainless Steel

Satin stainless steel faceplate for HES 851M electric strike systems
- Satin stainless steel construction resists corrosion in interior and exterior deployments.
- Direct compatibility with HES 851M electric strike systems simplifies retrofits and new installs.
- Faceplate form factor fits standard door frame preps; supports 12VDC electric strike wiring.
$55.00 $54.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $54.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 852K-630

HES 852K-630 Faceplate for 852 Series Locks

Replacement faceplate for HES 852 series electromechanical locks
- Faceplate for the HES 852 series electromechanical locks
- Direct-fit replacement for indoor commercial doors
- Maintains finished appearance after lock swap
$55.00 $54.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $54.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 852L-630

HES 852L-630 Electric Strike Faceplate

HES 852L faceplate for commercial strike mounting and finish
- Faceplate for the HES 852L series electric strike
- Direct OEM-fit for standard commercial door frames
- 12VDC strike-faceplate spare for institutional doors
$55.00 $54.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $54.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 852M-630

HES 852M-630 Faceplate for Access Control

HES 852M-630 faceplate for wall and flush-mount access control
- Fits HES 852 series control modules for drop-in replacement with no rewiring.
- Supports both wall-mounted and flush-mount configurations for flexible deployment.
- Operates on 12VDC input, compatible with standard access control power infrastructure.
$55.00 $54.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$55.00 $54.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 856LED

HES 856LED Replacement LEDs TS-2 Series 5-Pack

5-pack replacement LEDs for HES TS-2 access control status indicators
- Direct-fit replacements for HES TS-2 series require no modification to install.
- Five-pack quantity supports multi-door deployments and spare parts inventory.
- Genuine HES components ensure reliable status indicator compatibility on TS-2 devices.
$45.00 $44.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$45.00 $44.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 8600-MLRM2-30-US32D

HES 8600-MLRM2-30-US32D Motorized Latch Retraction

Motorized latch retraction, 30" opening, dual-switch control for access doors
- Fail-safe and fail-secure configurable modes with independent command circuits
- Satin stainless steel (300-series) construction for durability in high-traffic areas
- 24VDC motorized actuation with status feedback for access control integration
$2,645.00 $1,318.99 Save $1,326.01

Add to Cart
The item has been added
Free shipping over $499

$2,645.00 $1,318.99 Save $1,326.01

Add to quote Compare
Compare

Add to Cart The item has been added
HES

SKU: 9000-108-630

HES 9000-108-630 Spacer Kit 1/8 Plate Satin Stainless

1/8" satin stainless spacer for HES 9000 Series strike alignment
- 1/8" plate thickness corrects frame-to-strike gaps without over-shimming or binding.
- Satin stainless steel resists corrosion in indoor and semi-protected transition environments.
- Direct HES 9000 Series compatibility eliminates custom drilling or field rework on install.
$45.00 $44.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$45.00 $44.99 Save $0.01

Add to cart Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-116-628E

HES 9000-116-628E Spacer Plate 1/16 Inch

1/16" precision spacer plate for HES 9000 Series lock mounting
- 1/16-inch precision thickness eliminates shimming and ensures repeatable alignment.
- Designed exclusively for HES 9000 Series hardware for drop-in fit without modification.
- US-made construction at 0.2 lb keeps hardware weight minimal in multi-unit deployments.
$62.00 $61.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$62.00 $61.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-116-630

HES 9000-116-630 Spacer Kit 1/16 Satin Stainless

1/16" satin stainless spacer plates for HES 9000 Series locks
- 1/16" satin stainless steel construction resists corrosion in demanding environments.
- Engineered for HES 9000 Series, ensuring precise strike alignment and reliable lock engagement.
- Eliminates frame gaps that compromise electromagnetic lock performance in access control installs.
$45.00 $44.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$45.00 $44.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-ASB-613E

HES 9000-ASB-613E Aluminum Spacer Bracket

Aluminum spacer bracket for HES 9000 Series interior/exterior mounting
- Dark oxidized bronze finish resists corrosion in exterior applications
- Lightweight aluminum construction supports precise component alignment
- Compatible with HES 9000 Series electric strike and access control systems
$146.00 $145.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$146.00 $145.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-ASB-628

HES 9000-ASB-628 Aluminum Spacer Bracket

Aluminum spacer bracket for precise HES 9000 series mounting
- Satin anodized aluminum resists corrosion in humid environments
- Standardized spacing eliminates field shimming across retrofit projects
- Lightweight 1.25 lb design supports repeatable installation positioning
$134.00 $133.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$134.00 $133.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-ASB-BSP

HES 9000-ASB-BSP Aluminum Spacer Bracket

Precision aluminum spacer bracket for HES 9000 Series mounting
- Aluminum construction with flat black finish resists corrosion indoors and outdoors
- Engineered for exact spacing and alignment in access control installations
- Lightweight 2 lb bracket integrates seamlessly with HES 9000 hardware
$146.00 $145.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$146.00 $145.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9000-MTK

HES 9000-MTK Magnetic Template Kit for Electric Strikes

Magnetic template kit for HES 9400–9700 strikes—tool-free alignment
- Precision-etched guides eliminate measuring errors on latchbolt and mounting holes
- Magnetic adhesion to steel frames allows repositioning without damage or residue
- Reusable across multi-door projects to reduce per-unit labor and rework costs
$105.00 $104.99 Save $0.01

Add to Cart
The item has been added
Free shipping over $499

$105.00 $104.99 Save $0.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9700-630-LBM

HES 9700-630-LBM Access Control Hardware

Industrial access control strike for enterprise door management
- 24VDC electric strike with industrial-grade construction for high-traffic facilities
- Supports multiple mounting configurations for flexible installation in various setups
- Compatible with standard access control protocols for seamless system integration
$943.00 $491.99 Save $451.01

Add to Cart
The item has been added
Free shipping over $499

$943.00 $491.99 Save $451.01

Add to quote Compare
Compare

Out of stock
HES

SKU: 9700-630-LBSM

HES 9700-630-LBSM Electromechanical Access Control Device

Electromechanical access control for commercial doors, 24VDC electric strike
- Mechanical actuation maintains door security during power loss or network faults
- HES 9700 series platform integrates with standard access control system architectures
- LBSM configuration supports diverse mounting requirements in institutional facilities
$960.00 $484.99 Save $475.01

Add to Cart
The item has been added
Free shipping over $499

$960.00 $484.99 Save $475.01

Add to quote Compare
Compare

Out of stock
HES

SKU: AC25

HES AC25 Armored Cable 25' x 3/16" ID

25' armored cable with 3/16" ID for access control protection
- 25-foot run length reduces splicing needs across standard access control installations.
- 3/16" ID accommodates typical security device conductors without re-termination.
- Armored construction resists cuts, abrasion, and environmental wear in outdoor deployments.
$95.99

Add to Cart
The item has been added
Free shipping over $499

$95.99

Add to quote Compare

Access Control

Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.

Plan Your Deployment

Door count and expansion requirements
Reader type (card, keypad, biometric) and credential format
Fail-safe vs fail-secure hardware design
Power, cabling, and network connectivity planning
Multi-site governance and consistent standards

Buying Guide Get Recommendations Deployment Support

Build a Complete System

Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

Door intercoms

Aiphone DA-1MD Audio Handset Master Station

$82.99

Aiphone DB-1MD Hands-Free Master Station

$144.99

Aiphone DB-1SD Hands-Free Sub Master Station

$113.99

Aiphone JOS-1FW 7" Video Intercom Box Set with Mobile A

$820.99

What to Look For When Buying

The six decisions that matter most before you spec.

Fail-Safe vs Fail-Secure

Fail-safe locks (power-to-lock) unlock on power loss — required for egress routes by most fire codes. Fail-secure (power-to-unlock) stays locked on power loss — used on office and storage doors where security trumps egress. Life-safety code interpretation varies by jurisdiction; consult your AHJ before specifying. See our fail-safe vs fail-secure guide.

OSDP vs Wiegand

Wiegand is the legacy reader-to-controller protocol (unencrypted, one-way, limited to 26-bit formats). OSDP (Open Supervised Device Protocol) is the modern replacement — bidirectional, encrypted, supervised, and future-proof for Seos/mobile credentials. New deployments should be OSDP; plan a Wiegand-to-OSDP migration path in legacy systems before adding mobile credential support.

Credential Technology

125 kHz proximity (HID Prox, EM) is the legacy standard — cheap, cloneable, no security. 13.56 MHz smart cards (iCLASS SE, MIFARE DESFire EV3, Seos) use AES encryption and are the commercial standard. Mobile credentials via NFC/BLE increasingly replace physical cards — but only on OSDP-capable readers. Specify multi-technology readers for migration flexibility.

Cloud vs On-Prem Management

Traditional server-based access platforms (Lenel, Genetec, C-Cure) require IT infrastructure and maintenance contracts. Cloud-native platforms (Brivo, Openpath/Avigilon Alta, Genea) eliminate servers but add per-door monthly fees. Mid-size deployments increasingly choose cloud; enterprise + critical infrastructure still favor on-prem. Hardware choice determines which platforms you can run.

Power Supply Sizing

Every lock + reader + controller has an inrush current and a holding current — and they differ. Maglocks hold at 300-500 mA but pull 800 mA on release. UL 294 power supplies rated for total simultaneous holding + 25% headroom, with battery backup sized to code-required runtime. Undersized power supplies are the #1 cause of access-control nuisance failures.

Code Compliance (Egress)

IBC, NFPA 101, and ADA all mandate unimpeded egress. A magnetically-locked door requires a fire-alarm tie-in, a bond-sensor, and a request-to-exit device — omit any and the door is a code violation. Delayed-egress maglocks require 15-second delay + sounder per NFPA. Always confirm lock spec with the AHJ before ordering.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

OSDP v2 + Secure Channel

Open Supervised Device Protocol v2 with Secure Channel Protocol (SCP) delivers AES-128 encryption between reader and controller over RS-485. Replaces unencrypted Wiegand. Required for new federal deployments and FIPS 140-2 applications. All modern HID, ASSA ABLOY, and STid readers support OSDP + SCP.

Seos + iCLASS SE Credentials

HID Seos is the current-generation credential platform: AES-128 encrypted, multi-application, supports mobile wallets, backward-compatible with iCLASS SE. Seos credentials work on Seos readers + older iCLASS SE readers — iCLASS SE credentials do not work on legacy iCLASS (non-SE) readers. Plan migrations carefully.

FIPS 201 / PIV + PIV-I

Federal Identity Verification standard — the credential format used for federal employee and contractor badges. PIV-I (Interoperable) is the commercial variant for hospitals, utilities, and critical-infrastructure contractors. Specify PIV/PIV-I-capable readers (HID pivCLASS, multiCLASS SE) for any facility that hosts government visitors.

UL 294 Listing

Underwriters Laboratories listing for access control system units — power supplies, controllers, and locks. UL 294 6th edition covers security, durability, and overcurrent/overvoltage protection. Insurance and code requirements increasingly specify UL 294 listing. Altronix access-control power supplies are UL 294 listed across the catalog.

Wiegand Protocol

Legacy reader-to-controller protocol — one-way, unencrypted, variable bit-length format. Easily cloned with <$50 hardware. Still widespread because of low cost and universal compatibility. Acceptable for low-security interior doors; should be replaced with OSDP on any external or sensitive-area door.

Request-to-Exit (REX)

Motion- or push-button-activated device that signals the access controller to unlock the door from the secure side without generating an alarm. Required for maglock-equipped egress doors per code. PIR REX sensors must be properly aimed — nuisance alarms and held-door violations trace back to bad REX placement more than any other cause.

Typical Deployment Scenarios

Multi-Tenant Office Building

Lobby turnstiles with multi-tech readers, tenant suite doors with HID Signo + Seos, parking garage with long-range readers, elevator control for floor-by-floor access. Cloud platform (Brivo, Openpath) with mobile credentials replaces physical card issuance. Integration with SIP video intercoms for visitor management.

K-12 School Secure Vestibule

Front entry vestibule with fail-secure electric strike, interior Aiphone video intercom for visitor buzz-in, badge readers for staff, lockdown button integrated with mass notification. Back-of-house doors fail-safe per code. Full VMS integration for event overlay.

Hospital & Healthcare

Unit doors with HID multiCLASS SE + PIV-I compatibility, medication rooms with dual-authentication (card + biometric), ER ambulance bays with ruggedized readers, delayed-egress on behavioral health wards. Lenel or Genetec server-based platform with HIPAA-compliant audit logging. High-cycle-count electric strikes required.

Data Center & Critical Infrastructure

Biometric readers at server-room entries, mantrap doors with anti-tailgating sensors, cage-level access with OSDP + SCP, 7x24 audit logging. FIPS 201 / PIV-I credentials. Integration with IP cameras for tailgating review and infrastructure monitoring for physical-layer security.

Frequently Asked Questions

What's the difference between fail-safe and fail-secure locks?

Fail-safe locks (also called "power-to-lock") unlock on power loss — required for egress routes by most fire and life-safety codes. Fail-secure locks ("power-to-unlock") stay locked on power loss — typically used on office, storage, and supply doors where security trumps egress. Always confirm lock selection with the local AHJ; see our fail-safe vs fail-secure guide.

Is OSDP required for new access control installations?

Not legally required in most jurisdictions — but strongly recommended and effectively mandatory for federal deployments. OSDP with Secure Channel provides AES-128 encryption between reader and controller, bidirectional supervision, and future-proof support for mobile credentials. Legacy Wiegand is unencrypted and easily cloned. New deployments should be OSDP-capable from day one; legacy systems should plan a migration path.

Are HID card readers NDAA compliant?

Yes. HID Global is headquartered in Austin, TX, manufactures in multiple allied countries, and is fully NDAA Section 889 compliant. HID Signo, multiCLASS SE, iCLASS SE, and pivCLASS reader families are all eligible for federal, state government, and critical-infrastructure procurement. Credential cards are manufactured to the same compliance standard.

How do I size an access control power supply?

Add up holding current for all locks + reader standby current + controller standby current, then add 25% headroom for inrush and aging. Battery backup should provide code-required standby runtime (typically 4 hours for fire-alarm tie-ins; 15 min for access-only). Altronix UL 294 power supplies post clear spec sheets for total and per-output current — match to your actual load, don't guess.

Can mobile credentials replace physical access cards?

In most modern deployments, yes — but the reader has to support it. Readers need NFC and/or BLE (Bluetooth Low Energy) plus a partnership with the mobile credential platform (HID Mobile Access, Openpath, Kastle, etc.). Older proximity-only readers cannot read mobile credentials. Mobile adoption is usually mixed with physical cards during a multi-year transition — plan for both.

What's the difference between iCLASS SE and Seos credentials?

iCLASS SE was HID's previous-generation secure credential (AES-128, 2013-era). Seos is the current generation (2016+) — same AES-128 security, but multi-application, mobile-wallet capable, and future-proof. Seos credentials work on Seos-capable readers and on older iCLASS SE readers. iCLASS SE credentials do not work on legacy (pre-SE) iCLASS readers. See our HID Global catalog for current Seos SKUs.