HID · 921PWNNEK00324

HID 921PWNNEK00324 RPK40 Multiclass SE LF HF Reader

Multiclass LF/HF reader with Wiegand and PIU output for mixed credential environments

• Reads LF and HF credentials from a single device, reducing hardware SKUs in mixed-card sites.
• Wiegand and PIU outputs integrate directly with existing access controllers without rewiring.
• EVP-encrypted HF migration profile enables phased credential upgrades without full panel replacement.

HID · 922NTNNEK0014G

HID 922NTNNEK0014G RM40 Iclass SE HF Reader

Multi-technology reader for iCLASS SE, proximity, and magnetic stripe

• Reads iCLASS SE, magnetic stripe (ABA), and proximity cards from one install point.
• Wiegand 26-bit output integrates directly with legacy access control panels.
• RM40 form factor simplifies retrofit deployments at standard door frame locations.

HID · 925PTNTEK00425

HID 925PTNTEK00425 RMPK40 Multiclass SE Magstripe Reader

Multiclass reader for EM, HF, and magnetic stripe credentials in one device

• Reads EM, HF, magnetic stripe, and Wiegand credentials from a single device.
• Wiegand, SIO, SEOS, and MAG protocol outputs integrate with legacy and modern ACS.
• 32-bit MSB CSN output supports large enterprise credential databases out of the box.

HID · 940NTNTEKE0000

HID 940NTNTEKE0000 R90 iClass SE SEOS SIO Reader

HF iCLASS SE R90 reader with Wiegand, RS-232, and SIO/SEOS output

• Supports Wiegand, RS-232, and SIO/SEOS output for legacy and modern panel integration.
• Field-programmable Elite key encryption secures iCLASS SE E credentials in transit.
• 32-bit MSB CSN capture ensures full credential identity resolution across multi-site deployments.

HID · 94600

HID 94600 HDP6600 Single -Sided Printer

Single-sided ID card printer with 600 dpi and 230 cards/hour output

• Prints up to 230 CR-80 cards/hour at 600 dpi for high-volume badge production.
• USB 2.0 and 100 Mbps Ethernet ports enable direct integration into existing workflows.
• Supports 30–40 mil card stock with over-the-edge print area for full-bleed credentials.

HID · 94601

HID 94601 HDP6600 single-side card printer

Single-side thermal printer with integrated contactless encoder for ID cards

• Integrated contactless encoder eliminates a separate encoding station, shrinking deployment footprint.
• Encodes both proximity cards and contactless smart cards in a single unified issuance workflow.
• USB-connected, desktop form factor simplifies installation at distributed or centralized issuance points.

HID · 94602

HID 94602 HDP6600 single-side card printer

Single-side card printer with integrated encoding for on-site credential production

• Prints and encodes credentials in one pass at 230 cards/hour, enabling same-day issuance.
• 600 dpi HDP dye-sublimation delivers edge-to-edge color on CR-80 cards at 16.7M colors.
• USB 2.0 and 100 Mbps Ethernet interfaces support flexible integration into existing IT networks.

HID · 94610

HID 94610 HDP6600 Single-Sided Printer w/Flattenr

Single-sided CR80 printer with integrated flattener for ID badges

• Prints up to 230 CR80 badges per hour at 600 dpi via USB 2.0 or 100 Mbps Ethernet.
• Integrated flattener eliminates post-print warping, ensuring reliable card feeding in access control systems.
• 1 GB RAM and SmartScreen OLED panel support consistent high-volume deployment with minimal operator intervention.

HID · 94612

HID 94612 HDP6600 single-side card printer

Single-side printer with integrated encoder for proximity, magnetic stripe, and smart cards

• Prints at 230 cards/hour via 600 dpi HDP dye-sublimation for high-volume issuance.
• Integrated encoder supports Prox, iCLASS, mag stripe, and smart card in one device.
• USB 2.0 and 100 Mbps Ethernet interfaces simplify deployment into existing networks.

HID · 94641

HID 94641 HDP6600 dual-side card printer

Dual-side printer with built-in contactless encoder for single-pass card issuance

• Prints both card sides in a single pass at 230 cards/hour, cutting issuance time.
• 600 dpi HDP dye-sublimation delivers sharp, secure credential output on every card.
• USB 2.0 and 100 Mbps Ethernet ports simplify integration into existing network infrastructure.

HID · 94642

HID 94642 HDP6600 dual-side card printer

Dual-sided full-color printer with integrated magnetic, smart, contactless encoding

• Prints both card sides at 600 dpi in a single pass, up to 126 cards/hour.
• Encodes magnetic stripe, smart card, and contactless credentials without extra hardware.
• Connects via USB 2.0 or 100 Mbps Ethernet; backed by a 2-year warranty.

HID · 94643

HID 94643 HDP6600 dual-side card printer

Dual-side edge-to-edge card printer with tamper-evident HDP overlay

• 600 dpi edge-to-edge dual-side printing eliminates borders for complex security graphics.
• 126 cards/hour throughput with 100-card hopper reduces operator intervention on production runs.
• USB 2.0 and 100 Mbps Ethernet interfaces support flexible network or direct-connect deployment.

HID · 94644

HID 94644 HDP6600 dual-side card printer

Dual-side full-color printer with integrated contact chip encoder for enterprise ID issuance

• Prints full-color graphics on both card sides in a single pass, cutting cycle time.
• Built-in ISO/IEC 7816 contact chip encoder eliminates a separate encoding workstation.
• USB and network connectivity supports shared deployment across enterprise issuance workflows.

HID · 94646

HID 94646 HDP6600 dual-side card printer

Dual-sided card printer with integrated contactless and contact chip encoding

• Prints both card sides in one pass at 230 cards/hour, cutting production time significantly.
• 600 dpi HDP dye-sublimation output supports photographic quality and microprinting security features.
• Integrated dual encoder handles iCLASS, Mifare, and EMV smart cards via USB 2.0 or Ethernet.

HID · 94647

HID 94647 HDP6600 dual-side card printer

Dual-side printer with contact chip and magnetic stripe encoding for enterprise ID issuance

• Prints both card sides in one pass at 230 cards/hour, cutting issuance time significantly.
• 600 dpi HDP dye-sublimation output delivers sharp, durable credentials on every card.
• Integrated contact chip and magnetic stripe encoders eliminate separate encoding hardware.

HID · 94648

HID 94648 HDP6600 dual-side card printer

Dual-side printer with contactless, contact chip, and magnetic stripe encoding

• Prints both card sides at 600 dpi in one pass at 230 cards/hr, cutting issuance time.
• Encodes iCLASS, MIFARE, contact chip, and magnetic stripe from a single device.
• USB 2.0 and 100 Mbps Ethernet with 1 GB RAM support networked enterprise deployments.

HID · 94650

HID 94650 HDP6600 Single-Sided Printer w/Flattenr

Single-sided CR-80 card printer with integrated flattener for warp-free output

• Integrated flattener ensures warp-free CR-80 cards that pass mag-stripe and chip readers reliably.
• 600 dpi HDP dye-sublimation delivers micro-print and barcode clarity for tamper-evident credentials.
• 230 cards/hour throughput with USB 2.0 and 100 Mbps Ethernet supports networked high-volume issuance.

HID · 94651

HID 94651 HDP6600 dual-side card printer

Dual-side CR-80 card printer with integrated contactless encoder

• Prints and encodes contactless credentials in one pass at 230 cards/hour.
• 600 dpi HDP dye-sublimation output ensures sharp, durable dual-side card images.
• USB 2.0 and 100 Mbps Ethernet ports simplify integration into existing networks.

HID · 94652

HID 94652 HDP6600 dual-side card printer

Dual-side card printer with integrated encoding for high-volume credential issuance

• Prints both card sides in one pass at 600 dpi, yielding up to 126 cards per hour.
• On-board encoder supports ISO 14443 contactless, magnetic stripe, and barcode in-line.
• USB 2.0 and 100 Mbps Ethernet interfaces simplify integration into existing network infrastructure.

HID · 94653

HID 94653 HDP6600 dual-side card printer

Dual-sided ID printer with magnetic stripe encoding and built-in flattener

• Prints both card sides in one pass at 230 cards/hr, cutting batch issuance time significantly.
• 600 dpi HDP dye-sublimation output ensures sharp graphics and reliable magnetic stripe encoding.
• USB 2.0 and 100 Mbps Ethernet interfaces support flexible integration into existing network infrastructure.

HID · 94654

HID 94654 HDP6600 dual-side card printer

Dual-side smart card printer with contact chip encoder for high-volume ID issuance

• Prints both card sides simultaneously at 230 cards/hr, cutting issuance time per batch.
• Integrated ISO/IEC 7816 contact chip encoder eliminates a separate encoding station.
• 600 dpi HDP dye-sublimation output over USB 2.0 or 100 Mbps Ethernet for flexible deployment.

HID · 94655

HID 94655 HDP6600 dual-side card printer

Dual-side simultaneous printing with contactless and magnetic stripe encoding

• Prints 230 cards/hour dual-side, cutting credential issuance time for high-volume badge runs.
• 600 dpi HDP dye-sublimation delivers sharp, durable print quality on CR80 card stock.
• USB 2.0 and 100 Mbps Ethernet ports support flexible integration into existing network workflows.

HID · 94656

HID 94656 HDP6600 dual-side card printer

Dual-side simultaneous printing with integrated contactless and contact chip encoding

• Prints both card sides simultaneously at 230 cards/hour, cutting issuance cycle time.
• 600 dpi HDP dye-sublimation output delivers sharp, durable credentials on PVC or polyester.
• Integrated contactless and contact chip encoders eliminate external hardware in one unit.

HID · 94657

HID 94657 HDP6600 dual-side card printer

Dual-side card printer with chip and magnetic stripe encoding

• Prints both card sides in one pass at 230 cards/hour, cutting production cycle time.
• 600 dpi HDP dye-sublimation output meets ISO/IEC 7810 ID-1 for government and enterprise use.
• Integrated chip and mag stripe encoding (Tracks 1–3) eliminates separate encoding stations.

HID · 94658

HID 94658 HDP6600 dual-side card printer

Dual-side card printer with integrated multi-tech encoder for credential issuance

• Prints both card sides in one pass at 230 cards/hour, cutting batch issuance time.
• 600 dpi HDP dye-sublimation output ensures sharp, durable credential imaging.
• Onboard contactless, contact chip, and mag-stripe encoders eliminate separate peripherals.

HID · A910551

HID A910551 HDP5000 USB Assembly Board

USB assembly board for HDP5000 card printer communication

• Dual USB and Ethernet interfaces support single-workstation or networked card issuance.
• Drop-in PCB replacement eliminates firmware mismatches specific to HDP5000 systems.
• Wired-only design removes RF interference risk in secure, cable-run environments.

HID · A920221-17

HID A920221-17 HDP5000 Dual Laminator Main Board

H5K L2 main board for multi-door access control with iCLASS and mobile

• Prints at 300 dpi via HDP dye-sublimation for sharp, consistent card output.
• USB 2.0 and Ethernet with internal print server simplify network integration.
• UL, CE, FCC, and nine additional certifications support global deployment.

HID · 2122BG1MNN

HID Composite /prox 16K/16 Prog F-gloss - 2122BG1MNN

• Dual-frequency 125 kHz + 13.56 MHz supports both legacy Prox and iCLASS readers.
• 16 KB iCLASS memory with 16 application areas enables multi-use credential deployments.
• Composite construction rated -40 to 158 °F withstands extreme-temperature environments.

HID · 1536LGGMN

HID Composite Duoprox II Prog F-gloss B-g - 1536LGGMN

• Composite polyester/PVC laminate extends card lifetime in high-frequency daily badge use.
• 26-bit H10301 standard format ensures compatibility across existing HID proximity readers.
• Direct dye-sublimation print surface supports on-site photo ID badging without overlaminates.

HID · 1536LGGAN

HID Composite Duoprox II Prog F-gloss B-gloss Slot Dots Laser # NO Slot LAM - 1536LGGAN

• 125 kHz HID Prox compatibility ensures drop-in fit with existing ProxPoint readers.
• Composite polyester/PVC construction extends credential lifecycle in high-use deployments.
• Pre-applied laser engraving and slot punch simplify inventory tracking and badge mounting.

HID · 1456DNGGNN

HID Composite HID Desfire EV2 8KB Non-prog F-gloss B-gloss NO # NO Slot - 1456DNGGNN

• AES-128/3DES encryption on 8 KB DESFire EV2 memory secures credential data at rest.
• Non-programmed format allows direct enrollment without additional encoding hardware.
• Composite PVC/PET construction withstands -40 to 158°F and repeated thermal print cycles.

HID · 2101CGGNN

HID Composite Iclass 16K/2 Config F-gloss B-gloss No# NO Slot - 2101CGGNN

• Composite polyester/PVC body resists cracking and warping across -40 to 158 °F operating range.
• 16K/2 memory with Config F supports two independently managed applications on a single credential.
• Blank CR80 gloss card accepts dye-sublimation printing and custom sequential encoding out of box.

HID · 2100HPG1MN

HID Composite Iclass 2K/2 - 2100HPG1MN

• Operates on both 13.56 MHz iCLASS and 125 kHz proximity, bridging mixed reader environments.
• 2 KB memory with two application areas supports flexible, multi-use credential data structures.
• Rated -40 to 158°F and dye-sublimation printable, ready for standard badge holder deployment.

HID · 2420PMGGMNN

HID Composite Iclass 2K/2 Mifare 1K Prog Iclass Non-prog Mifare F-gloss B-gloss - 2420PMGGMNN

• Single 13.56 MHz card carries both iCLASS 2K/2 and MIFARE 1K chips for mixed-reader sites.
• Programmable iCLASS chip enables custom credential data; MIFARE ships non-programmed for legacy readers.
• Dye-sublimation-ready glossy composite construction supports photo ID badging in standard CR80 holders.

HID · 2100PG1AN

HID Composite Iclass 2K/2 Prog - 2100PG1AN

• Composite polyester/PVC laminate resists thermal stress and wear in harsh industrial sites.
• 13.56 MHz iCLASS technology delivers reliable read range across existing HID reader infrastructure.
• 2 KB memory with two application areas supports combined logical and physical access on one card.

HID · 2100PG1CN

HID Composite Iclass 2K/2 Prog - 2100PG1CN

• 13.56 MHz iCLASS protocol ensures reliable read range across HID-compatible readers.
• 2K/2 programmable memory supports custom encoding and multi-application credential schemes.
• Composite CR80 body rated -40 to 158°F; accepts dye-sublimation direct printing.