Camden

SKU: CX-ED1079D

Camden CX-ED1079D Standard Depth Grade 1 Electric Strike

Grade 1 networked electric strike for enterprise access control

• TCP/IP integration with remote credential verification and door release
• Standard depth installation fits typical commercial door frame profiles
• Compatible with enterprise security platforms for centralized management

Camden

SKU: CX-ED1079D-BK

Camden CX-ED1079D-BK Electric Strike

• Grade 1 BHMA/ANSI A156.31 rated for 1,000,000 cycles with 1,500 lbs holding force.
• Dual 12V/24V AC/DC input with field-selectable fail-safe or fail-secure operation.
• SPDT latch monitoring output integrates directly into access control panel supervision.

Camden

SKU: CX-ED1079DL

Camden CX-ED1079DL Standard Depth Electric Strike

• Grade 1 ANSI A156.31 rated with 1,500 lb static hold force for high-traffic doors.
• Field-selectable 12/24V AC/DC and fail-safe/fail-secure modes eliminate rewiring at config.
• Optional SPDT latch monitor (100mA @ 24V DC) delivers position feedback to your access panel.

Camden

SKU: CX-ED1079DL-BK

Camden CX-ED1079DL-BK Electric Strike

• Grade 1 ANSI A156.31 rated at 1,500 lbs static hold and 70 ft-lbs dynamic strength.
• 12/24V AC/DC with field-selectable fail-safe or fail-secure mode reduces panel wiring changes.
• Built-in SPDT latch monitor (100mA @ 24V DC) feeds door status directly to access control panels.

Camden

SKU: CX-ED1079L

Camden CX-ED1079L Low Profile Grade 1 Electric Strike

• 1.22" depth fits retrofit frames where standard 2"+ strikes cannot be installed.
• Grade 1 rated at 1,500 lbs static hold force for high-traffic commercial doors.
• 12/24V AC/DC selectable with SPDT latch monitor output for panel integration.

Camden

SKU: CX-ED1079L-BK

Camden CX-ED1079L-BK Electric Strike Lock

• 1,500 lb static hold force meets Grade 1 duty for 24/7 high-traffic deployments.
• 1.22" depth fits thin frames and glass doors where standard 2.375" strikes won't clear.
• Field-selectable 12/24V AC/DC and fail-safe/fail-secure modes set via jumper at rough-in.

Camden

SKU: CX-ED1799L-8

Camden CX-ED1799L-8 Dual Monitor Electric Strike

TCP/IP electric strike with dual monitoring for single-door access control

• Two independent monitor switches cross-verify strike engagement in real time
• Direct TCP/IP network integration—no relay layers or analog conversion needed
• 12VDC operation simplifies power distribution and reduces shock hazard

Camden

SKU: CX-ED2071

Camden CX-ED2071 Electric Strike

• Grade 2 ANSI A156.31 rated at 1,000 lbs static holding force for commercial frames.
• Dual-voltage 8V/16V AC/DC input eliminates separate power supplies on most door controllers.
• Field-selectable fail-safe/fail-secure mode lets you match egress or security policy per door.

Camden

SKU: CX-ED2071-BK

Camden CX-ED2071-BK Electric Strike

• Field-selectable 8V or 16V AC/DC eliminates voltage-matching hardware swaps on site.
• Fail-safe or fail-secure mode switchable in the field to meet code or policy changes.
• 1,000 lb static hold and 700,000-cycle rating supports high-traffic commercial deployments.

Camden

SKU: CX-ED2079

Camden CX-ED2079 Electric Strike

• Field-selectable 12/24V AC/DC input fits existing controller outputs without rewiring.
• Grade 2 ANSI A156.31 rated: 1,000 lb static and 50 ft-lb dynamic holding strength.
• Fail-safe or fail-secure mode is mechanically switchable on-site, no rewiring needed.

Camden

SKU: CX-ED2079-1-BK

Camden CX-ED2079-1-BK Electric Strike

• Field-selectable 12VDC or 24VAC/VDC eliminates hardware swaps when mixing legacy and modern panels.
• 1,000 lbs static holding force meets ANSI/BHMA A156.25 Grade 2 for single-leaf commercial doors.
• Three included stainless faceplates (ESP1B, ESP3B, ESP4B) cover beveled and straight frames in retrofits.

Camden

SKU: CX-ED2079-BK

Camden CX-ED2079-BK Electric Strike

12VDC electric strike for standard door frame access control

• 12VDC operation integrates with most distributed access control power supplies
• Mounts directly to standard door frame for straightforward installation
• Designed for commercial and institutional entry control applications

Camden

SKU: CX-EPD-2010L

Camden CX-EPD-2010L ANSI Square Electric Strike

• ANSI square profile fits standard commercial door frame cutouts without modification.
• TCP/IP and PoE connectivity enables centralized remote management across facility networks.
• 5-year warranty backs heavy-duty stainless steel construction for high-cycle deployments.

Camden

SKU: CX-EPD-2020L

Camden CX-EPD-2020L ANSI Round Electric Strike

• TCP/IP communication enables centralized remote unlock within IP-based access control systems.
• ANSI round form factor supports standard door preparations, simplifying retrofit deployments.
• 5-year warranty and non-handed design reduce long-term maintenance and inventory overhead.

Camden

SKU: CX-EPD-2040L

Camden CX-EPD-2040L Electronic Door Strike

• TCP/IP connectivity integrates directly with networked access control systems, no relay required.
• Non-handed design installs left or right, reducing SKU count across multi-door deployments.
• Removable latch monitoring switch enables real-time door status feedback to the access panel.

Camden

SKU: CX-EPD0009

Camden CX-EPD0009 Magnetic Cabinet Lock

• 440 lb holding force secures loaded equipment cabinets and high-value enclosures.
• Selectable 12V or 24VDC input integrates into legacy or modern control architectures.
• 60mA draw at 12VDC simplifies relay sizing across distributed access control deployments.