Camden

SKU: CM-221/A42W

Camden CM-221/A42W ValueWave Touchless Switch Double Gang

• IP65-rated housing withstands washdowns and humidity in high-traffic entry points.
• Form C relay (1A @ 30VDC) integrates with any standard access panel—no proprietary interface.
• IR touchless activation removes hand-contact vectors; adjustable range 2–8 inches.

Camden

SKU: CM-222/46

Camden CM-222/46 ValueWave Touchless Switch Single Gang

• Active IR sensor detects hand presence at 2–8 in. in 10 ms, eliminating touch points.
• 12–24 VDC relay output (1A/30VDC) drives EM locks or solenoid strikes in NO/NC configs.
• IP65-rated, −13°F to 122°F range suits indoor vestibules and outdoor-facing entries.

Camden

SKU: CM-222/46N

Camden CM-222/46N ValueWave Touchless Switch Narrow Jamb

• IR touchless activation eliminates contact wear and cross-contamination in high-traffic areas.
• TCP/IP connectivity enables remote status reporting and audit trail integration over standard Ethernet.
• Narrow jamb profile fits 4.625-inch door frames without surface protrusion or swing obstruction.

Camden

SKU: CM-222/46W

Camden CM-222/46W ValueWave Touchless Switch Double Gang

• Touchless IR microburst activation eliminates contact, reducing cross-contamination risk.
• Dual relay outputs (Common/N.O./N.C.) drive EM locks or signaling devices up to 1A/30VDC.
• IP65-rated; detection range and time delay tunable on-site for precise door-traffic tuning.

Camden

SKU: CM-222/A42

Camden CM-222/A42 ValueWave Touchless Switch Single Gang

• IR microburst sensor detects hand presence at 2–8 inches, eliminating physical contact.
• Runs on 12–24VDC with 45mA peak draw; fits standard single-gang boxes for easy retrofit.
• 10ms activation latency and 0.5–20s adjustable hold time suit automatic door opener circuits.

Camden

SKU: CM-222/A42N

Camden CM-222/A42N ValueWave Touchless Switch Narrow Jamb

• Active IR microburst sensor adjusts 2–8 in. detection; immune to ambient light and shadows.
• 1-3/4" jamb profile fits standard 4-7/8" frames—no wall excavation or frame modification needed.
• Dry-contact relay (C/NO/NC) integrates with any access control panel or standalone 24VDC lock.

Camden

SKU: CM-2230

Camden CM-2230 Key Switch SPDT Maintained

• SPDT maintained action holds lock state without continuous input, supporting fail-safe wiring.
• Rated 30VDC for compatibility with standard low-voltage door strike and access control circuits.
• Mortise cylinder design accepts 1", 1-1/8", or 1-1/4" cylinders for mechanical key override deployments.

Camden

SKU: CM-2250

Camden CM-2250 Key Switch SPDT Momentary

• SPDT momentary relay delivers a single pulse, preventing solenoid heating and lock chatter.
• Rated 30VDC for direct compatibility with standard low-voltage access control panels and strikes.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders, enabling site-specific keying without module swap.

Camden

SKU: CM-2290

Camden CM-2290 Key Switch DPDT Maintained

• DPDT contacts switch two independent 30VDC circuits simultaneously on one key rotation.
• Maintained logic holds position until manually reset—no sustained signal or pulse required.
• Accepts standard 1"–1¼" mortise cylinders, sourced and keyed independently by your locksmith.

Camden

SKU: CM-23

Camden CM-23 Surface Box Standard Depth

• Surface-mount enclosure houses HID-format credential readers in access control deployments.
• TCP/IP communication integrates directly into IP-based access control network architectures.
• Standard-depth geometry suits installations where shallow enclosure clearance is required.

Camden

SKU: CM-23CP

Camden CM-23CP Narrow Jamb Stainless Steel Cover Plate

Stainless steel cover plate for narrow jamb electric strike installations

• Narrow-jamb stainless steel cover plate for electric strike installs
• Fits tight metal door frames where standard plates won't seat
• Stainless build resists corrosion in high-traffic entry environments

Camden

SKU: CM-23DSER

Camden CM-23DSER Surface Box Extra Deep

• Extra-deep cavity accommodates cabling, terminations, and modules without stress on connectors.
• Purpose-built footprint aligns with HID proximity, smartcard, and mobile credential readers.
• Surface-mount design eliminates frame cutouts, reducing retrofit cost and coordination overhead.

Camden

SKU: CM-2520/48

Camden CM-2520/48 Combo Switch Lock/Strike

• Mounts to standard double-gang box — no frame mods needed on retrofit installs.
• 12/24V AC/DC universal input integrates with legacy and modern access control panels.
• Built-in N/O SPST relay at 3A/30V DC drives strikes directly, eliminating external relays.

Camden

SKU: CM-2520/4854SE1

Camden CM-2520/4854SE1 Combo Switch Lock/Strike

• Integrated push-plate and strike in one double-gang assembly reduces wiring and hardware.
• Rated 3A @ 30V DC with silent operation — no relay chatter in healthcare or secure areas.
• Accepts 12V or 24V AC/DC, fitting existing panel infrastructure without voltage conversion.

Camden

SKU: CM-2520/4855SE1

Camden CM-2520/4855SE1 Combo Switch Lock/Strike

• Dual 12/24V AC/DC operation supports mixed electrical infrastructure without extra units.
• SPST momentary 3A/30VDC output drives electric strikes or mag-locks without relay stages.
• 4.5"×4.5" stainless steel plate mounts to standard double-gang boxes; no custom cutouts.

Camden

SKU: CM-3000/34N

Camden CM-3000/34N Green Illuminated Mushroom Push/Pull Button

• 30VDC/125VAC, 6A UL/CSA-rated switching drives locks and strikes without relay modules.
• Green LED mushroom head provides clear visual feedback in low-light corridors and exits.
• 1/4" brushed aluminum faceplate withstands repeated use in institutional and healthcare settings.