Camden

SKU: CX-WC17VR

Camden 6\" Wide Column™ Switch with Hands-free - CX-WC17VR

• Single-door TCP/IP controller enables modular, distributed deployment across networked sites.
• Operates at 24VDC with battery backup, supporting electric strike control for standard door hardware.
• Rated −20°C to 70°C, suitable for interior and exterior-mounted access point installations.

Camden

SKU: CX-WC17VR-PS

Camden 6\" Wide Column™ Switch with Hands-free Sensor Restroom Syst...

Single-door keypad controller in compact 6" column for restroom access

• Keypad-based credential entry with electric strike activation for secure entry
• 24VDC low-voltage operation suitable for code-compliant commercial installations
• Operates reliably from −20°C to 70°C across indoor and climate-controlled spaces

Camden

SKU: CX-WC17-PS

Camden 6\" Wide Column™ Switch with LED Annunciator - CX-WC17-PS

• Column-mount form factor installs directly on door frames without retrofit brackets.
• Built-in relay drives 12 VDC or 24 VDC electric strikes in fail-safe or fail-secure modes.
• LED annunciators deliver real-time occupancy and strike status without a separate display module.

Camden

SKU: CX-WC17

Camden 6\" Wide Column™ Switch with LED Annunciator Restroom System...

Single-door restroom controller with 6" LED column and keypad reader

• Integrated keypad credential entry with electric strike control via 24VDC
• 6" wide LED annunciator column displays door state and access events
• TCP/IP networked communication for centralized monitoring and audit logging

Camden

SKU: CX-WC17SLVR

Camden 6\" Wide Side load Column™ Switch with - CX-WC17SLVR

• TCP/IP connectivity enables real-time event logging and remote credential management.
• Side-load reader cavity simplifies installation and future maintenance on column mounts.
• Direct electric strike output supports both fail-secure and fail-safe locking configurations.

Camden

SKU: CX-247H-12

Camden 7 day timer with first-man-in function - 12 - CX-247H-12

• First-man-in relay holds the door locked until authorized entry, eliminating holiday reprogramming.
• 16 on/off events across 15 daily/weekly slots cover shift changes and multi-site operating calendars.
• 30VDC @ 16A output drives electrified locks, magnetic strikes, and automatic door operators directly.

Camden

SKU: CM-TX-99

Camden 915Mhz. plug-in transmitter for SureWave(tm) - CM-TX-99

• Adds 915MHz wireless to CM-120i/W or CM-331/332 without running additional cable.
• Plug-in board draws power from the host device — no external wiring or antenna needed.
• Pairs with CM-RX-91/CM-RX-92 receivers in ~10 seconds via simple learning-button enrollment.

Camden

SKU: CM-43CBL-ADP1

Camden Adaptor kit to mount SUREWAVE(tm) double - CM-43CBL-ADP1

• Bridges SUREWAVE double gang keypads to CM-4 series controllers without rewiring.
• Watertight-rated installation supports outdoor and wet-area access control deployments.
• Hardwired HID keypad integration eliminates wireless dependencies for secure credentialing.

Camden

SKU: CM-42-IG

Camden Additional In-ground mounting base with rebar - CM-42-IG

• Rebar-welded base locks post in concrete, eliminating movement in freeze-thaw cycles.
• Supports up to 5-door access control deployments with hard-wired or 915MHz wireless.
• Outdoor-rated ABS construction suits perimeter and high-traffic facility entry points.

Camden

SKU: CM-4000/60N

Camden Additional N/O circuit for CM-3000-8000 - CM-4000/60N

• Adds a discrete N/O relay output to expand strike/lock control on CM-3000–CM-8000 systems.
• Operates at 30VDC, integrating directly with existing Camden power and strike infrastructure.
• TCP/IP networked module supports DESFire, MIFARE, HID, SEOS, and 125 kHz credentials centrally.

Camden

SKU: CX-EPD1289L-BK

Camden All-black finish 3/4\" surface mount - CX-EPD1289L-BK

• 12/24V AC/DC jumper-selectable voltage reduces SKU count on multi-voltage sites.
• Fail-safe/fail-secure field-configurable via jumper—no strike swap needed.
• ANSI/BHMA Grade 1 and UL10C 3-hour fire-rated; survives 500k UL cycles minimum.

Camden

SKU: CM-PT250AL-18

Camden Aluminum endcaps 18\" length (Formerly - CM-PT250AL-18

• Aluminum construction resists corrosion for reliable indoor access control deployments.
• 1/4" ID bore mates precisely with compatible power transfer cable, preventing separation.
• Pre-matched 18" length eliminates field cutting for standard single-door cable runs.

Camden

SKU: CM-PT375AL-18

Camden Aluminum endcaps 18\" length (Formerly - CM-PT375AL-18

• Aluminum body resists corrosion indoors and outdoors, no coatings required.
• 3/8" ID fits up to 16x 22-AWG or 8x 18-AWG conductors for multi-zone wiring.
• 18" length eliminates excess cable coil in tight door-frame or pilaster spaces.

Camden

SKU: CX-RIM-SB

Camden Aluminum surface mounted adapter box for - CX-RIM-SB

• Eliminates strike alignment guesswork on double-door RIM assemblies via included jig.
• Compatible with CX-EPD1289L and CX-EPD1299L electric RIM strikes for predictable fit.
• Aluminum surface-mount housing (9.19" × 1.97" × 1.25") ships with full fastener kit.

Camden

SKU: CX-ESP2

Camden ANSI Round 4 7/8\" X 1 1/4\" stainless steel - CX-ESP2

• ANSI 4 7/8" × 1¼" profile drops into standard strike pockets with no frame modification.
• Stainless steel housing resists corrosion, reducing maintenance cycles on high-traffic entries.
• Runs directly off access control panel relay outputs—no auxiliary power modules required.

Camden

SKU: CX-ESP1

Camden ANSI Square 4 7/8\" X 1 1/4\" - CX-ESP1

• ANSI 4 7/8" × 1 1/4" form factor fits standard North American frames without custom cuts.
• TCP/IP integration enables remote unlock commands and audit logging across multi-door deployments.
• Fail-secure design keeps doors locked on power loss, meeting life-safety egress code requirements.