Lifesafety Power

SKU: FPO75-D8E1

Lifesafety Power FPO75-D8E1 8 Aux Outputs 6A/12V Or 3A/24VFUSED @

• Eight independently fused outputs prevent cascade failures when a single load shorts.
• Supports 6A per output at 12V or 3A per output at 24V for mixed-voltage deployments.
• 75W regulated budget powers door strikes, sensors, and relay circuits from one cabinet unit.

Lifesafety Power

SKU: FPO75-D8E1-2SL1

Lifesafety Power FPO75-D8E1-2SL1 4DR Sv E1 75W 8 Aux Outputs Two

• Dual-voltage output (12VDC/6A or 24VDC/3A) matches most door controllers and locks.
• Eight auxiliary outputs distribute power to multiple devices from one 75W enclosure.
• Two integrated Salto plates simplify field mounting for Salto-compatible deployments.

Lifesafety Power

SKU: FPO75-D8E1M

Lifesafety Power FPO75-D8E1M FPO75-D8E1M

• 75W capacity across 8 independent outputs simplifies multi-camera power distribution.
• Integrated battery backup maintains cameras and access control during AC mains loss.
• Single centralized supply reduces wiring runs and cuts installation labor vs. per-device adapters.

Lifesafety Power

SKU: FPO75-D8E1R

Lifesafety Power FPO75-D8E1R 6A/12V OR 3A/24V 8 AUX OUTPUTSE1 RED

• Delivers 6A/12V or 3A/24V at 75W to power up to eight auxiliary devices.
• Each of the eight outputs is individually fused at 2.5A, isolating faults per zone.
• E1-rated red enclosure meets fire-alarm and life-safety code marking requirements.

Lifesafety Power

SKU: FPO75-D8E2

Lifesafety Power FPO75-D8E2 FPO75-D8E2

• Eight supervised outputs let one unit power cameras, locks, and readers from a single point.
• 75 W total budget distributes across multiple devices without overloading a single feeder line.
• Integrated battery charger enables backup hold-up for door locks and alarms during mains failure.

Lifesafety Power

SKU: FPO75-D8E2-4SL1

Lifesafety Power FPO75-D8E2-4SL1 8DR Sv E2 75W 8 Aux Outputs Four

• 75W output delivers 6A@12V or 3A@24V to power locks, readers, and ancillary devices.
• Eight isolated auxiliary outputs limit fault blast radius — one shorted circuit won't drop the full zone.
• Integrates with Salto electronic lock systems and Wiegand or IP-based reader infrastructures.

Lifesafety Power

SKU: FPO75-D8E2M

Lifesafety Power FPO75-D8E2M FPO75-D8E2M

• 75W UPS capacity sustains access control readers, locks, and intercoms during AC failure.
• Compact wall-mount form factor fits tight ceiling and wall cavities in small-to-medium installs.
• Battery backup operation maintains power continuity for light-duty surveillance equipment on-site.

Lifesafety Power

SKU: FPO75-D8E4M

Lifesafety Power FPO75-D8E4M FPO75-D8E4M

• 75W redundant supply eliminates single points of failure in distributed security installs.
• Dual independent AC input channels auto-switch on failure without dropping the connected load.
• Fits access control and surveillance power distribution architectures requiring redundancy.

Lifesafety Power

SKU: FPO75-D8E4P

Lifesafety Power FPO75-D8E4P FPO75-D8E4P

• 8 supervised outputs detect open circuits and load faults, alerting the control panel instantly.
• 75W capacity supports multiple card readers, electric locks, or siren circuits from one unit.
• Battery backup ready — maintains door lock power during AC loss without additional hardware.

Lifesafety Power

SKU: FPO75-D8E4S

Lifesafety Power FPO75-D8E4S FPO75-D8E4S

• 75W total output powers cameras, readers, locks, and aux devices from one supply.
• Multiple independent output channels let you balance load distribution across circuits.
• Centralized sourcing eliminates per-endpoint adapters, simplifying conduit runs.

Lifesafety Power

SKU: FPO75-D8PE1

Lifesafety Power FPO75-D8PE1 FPO75-D8PE1

• 8 independent Class 2 outputs, each fused at 2.5A, prevent cascade failures.
• 75W capacity delivers 6A at 12VDC or 3A at 24VDC from a single supply point.
• E1 enclosure suits indoor control rooms, closets, and equipment cabinet installs.

Lifesafety Power

SKU: FPO75-D8PE2VM/P

Lifesafety Power FPO75-D8PE2VM/P FPO75-D8PE2VM/P

• Delivers 6A at 12VDC or 3A at 24VDC across eight Class II power-limited outputs.
• 20"H × 16"W × 4.5"D enclosure mounts in standard electrical closets or cabinets.
• Centralizes auxiliary power for card readers, electric locks, and sensor loops.

Lifesafety Power

SKU: FPO75-D8PE4B

Lifesafety Power FPO75-D8PE4B FPO75-D8PE4B

• 75W DIN-rail supply delivers 8 independently supervised outputs for multi-zone deployments.
• Per-output supervision enables individual circuit fault isolation across mixed device types.
• Supports 12VDC or 24VDC input rails to fit existing facility power infrastructure.

Lifesafety Power

SKU: FPO75-D8PE6M

Lifesafety Power FPO75-D8PE6M FPO75-D8PE6M

• 75W regulated DC output sustains cameras and access readers during mains failure.
• Multi-output terminal design allows modular power distribution across several endpoints.
• Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.

Lifesafety Power

SKU: FPO75-D8PNLCE4M

Lifesafety Power FPO75-D8PNLCE4M 75W Single Voltage 120 VAC

• 75W single-voltage output centralizes power for multiple low-current security loads.
• 120VAC input aligns with standard dedicated AC circuits, reducing distribution complexity.
• Single-voltage design cuts transformer overhead and lowers installation labor on uniform rails.

Lifesafety Power

SKU: FPO75/150-2C82D8E8M

Lifesafety Power FPO75/150-2C82D8E8M FPO75/150-2C82D8E8M