i-PRO · WV-QSR507F-W

i-PRO WV-QSR507F-W Wall Mount Bracket 1.5 NPS

Wall bracket for i-PRO dual-sensor cameras, 1.5" NPS thread, 25mm depth

• ISO female parallel (Rp 1-1/2) accepts standard male taper connections
• 25.4 mm stand-off depth allows cable routing behind camera body
• White powder-coat steel finish for indoor corporate and retail environments

i-PRO · WV-QSR503-W

i-PRO WV-QSR503-W 4-Screw Dome Mount Bracket White

4-screw dome bracket for ceiling/wall mounting up to 11 lbs

• 4-screw pattern distributes load across four anchor points for stability
• Mounts on ceiling or wall surfaces without requiring additional brackets
• White finish integrates with standard commercial ceiling installations

Ubiquiti · U-PRO-MP

Ubiquiti U-PRO-MP Mounting Hardware

Wall, pole, and rack mounting for UniFi equipment indoors and out

• Supports wall, pole, and rack installation, eliminating one-off mounting per site.
• Outdoor-rated hardware handles diverse deployment environments without additional hardware.
• At 0.4 lbs, installs on standard studs, poles, and 19-inch rails without reinforcement.

Axis · 02437-001

Axis TW1104 Magnetic Mount 5-Pack - 02437-001

Tool-free magnetic mounts for Axis IP cameras on steel surfaces

• 5-pack of ferrous-surface magnets; no drilling, fasteners, or wall damage
• Secure hold on steel beams, shelving, and equipment frames without vibration slip
• Reposition in seconds; ideal for warehouses, retail, and temporary deployments

Axis · 02321-001

Axis TW8100 Rack Mount System Controller - 02321-001

1U rack mount consolidates 5 controllers with dual Gigabit per unit

• Stack 5 W800 System Controllers in single 1RU space, reducing footprint by ~80%
• Each controller retains independent dual Gigabit Ethernet for network redundancy
• Passive cooling with optimized airflow; unified power via single rack PDU connection

i-PRO · WV-QWL501-W

i-PRO WV-QWL501-W Wall Mount Bracket White

Wall-mounted bracket for direct i-PRO camera surface attachment

• White finish integrates into office, retail, and warehouse environments
• Direct wall attachment eliminates ceiling penetrations and retrofit costs
• Verify i-PRO model compatibility before purchase—mounting is camera-specific

Pelco · NPTA-1201

Pelco NPTA-1201 1.5 NPT Pipe Adapter

1.5" NPT pipe adapter for Pelco pendant mount camera systems

• Female-to-female coupling threads standard 1.5" NPT connections
• OEM Pelco component for secure fit in surveillance installations
• NDAA Section 889 compliant for government and critical infrastructure

Pelco · UEBP0AA

Pelco UEBP0AA Parapet Bracket ULISSE EVO

Parapet bracket for ULISSE EVO PTZ cameras with internal cable routing

• RAL9002 powder coat finish resists corrosion in outdoor flat-roof installations
• Internal cable channels route power and communications through bracket body
• NDAA Section 889 compliant for government and institutional deployments

Pelco · WLMT-1021

Pelco WLMT-1021 Pendant Arm 20cm 1.5in NPT

Compact 20cm pendant arm with 1.5" NPT for drywall and interior mounts

• 20cm length reduces structural load and moment stress on lightweight walls
• 1.5-inch NPT threading integrates with standard Pelco camera mount stacks
• Fits confined spaces and interior corridors where full-length arms won't fit

Axis · 02528-001

Axis TS3901 Rail Extensions for S3016 - 02528-001

Rail extensions for S3016 recorder in 499–689 mm deep racks

• Adjustable 499–689 mm post-to-post range fits non-standard rack depths
• Enterprise-grade steel construction for stable recorder mounting in data centers
• Direct integration with Axis S3016 Recorder without additional adapters

Axis · 02126-001

Axis TW1100 Tool-Free Clip Mount Attachment - 02126-001

Tool-free clip mount with 360° rotation for Axis body-worn cameras

• Instant attachment and repositioning without tools or fasteners
• 360-degree rotation locks angle for any viewing direction without removal
• High-resilience clip maintains secure hold through running and tactical movement

Axis · 02129-001

Axis TW1103 Chest Harness Mount - 02129-001

Chest harness mount for hands-free Axis body camera operation

• Adjustable straps accommodate variable body sizes for secure fit
• Complete kit includes harness, straps, and mounting hardware
• Ergonomic chest position keeps camera stable during active work

Axis · 02689-001

Axis TW1106 Magnet Mount Body Worn Camera 5-Pack - 02689-001

Magnetic mount for AXIS W110 body camera—quick attach/detach on fabric

• 5-pack of magnetic mounts for the Axis W110 body cam
• Attaches to fabric without adhesives or fasteners
• Standard squad-issue accessory for patrol uniforms

Axis · 02690-001

Axis TW1107 Magnet Mount Accessory - 02690-001

Magnetic mount for Axis cameras—tool-free positioning without surface damage

• Strong magnetic grip holds cameras securely across varied surfaces without tools
• Vibration-resistant design maintains stable positioning in dynamic environments
• Compatible with most Axis cameras equipped for magnetic mounting capability

Axis · 02966-001

Axis TW1108 Screw-on Mount - 02966-001

Screw-on mount for Axis cameras, wood/metal/concrete, indoor-outdoor

• Corrosion-resistant steel construction rated for indoor and outdoor use
• Low-profile design fits wood, metal, and concrete mounting surfaces
• Quick screw-on installation for Axis fixed dome and bullet cameras

Digital Watchdog · DW-DTCAW

Digital Watchdog DW-DTCAW White Conduit Cable Entry Adaptor

• Conduit cable entry adaptor for Digital Watchdog cameras
• White finish blends with standard building infrastructure
• Indoor/outdoor rated for clean cable management at the camera

Digital Watchdog · DW-DTWMDTLA5

Digital Watchdog DW-DTWMDTLA5 Mounting Bracket

• Mounting bracket for Digital Watchdog camera installations
• Multi-angle install supports varied wall and ceiling geometries
• 5-year limited warranty - drops onto DW camera mount hardware

Digital Watchdog · DWC-BLJUNCW

Digital Watchdog DWC-BLJUNCW Junction Box White

• Junction box for clean cable routing on Digital Watchdog cameras
• White finish blends with standard ceilings and indoor decor
• Factory-matched bracket eliminates separate fastener sourcing

Digital Watchdog · DWC-MT9JUNCB

Digital Watchdog DWC-MT9JUNCB Junction Box

• Junction box for Digital Watchdog MT9 series cameras
• Conceals cable terminations behind clean camera housing
• Indoor/outdoor durability for any-environment installation

Digital Watchdog · DWC-SP00901175

Digital Watchdog DWC-SP00901175

• NDAA-compliant DW MEGApix and Spectrum platform spare module
• Factory-authorized service component for repair and replacement
• OEM service component for DW surveillance platform integrators

Digital Watchdog · DWCSP00901006

Digital Watchdog MV421 Dome - DWCSP00901006

FLIR · 4129742

FLIR 4129742 Camera Mount

FLIR · 421-0066-00

FLIR Corner Mount KIT - 421-0066-00

• Corner mount kit for FLIR cameras on wall junctions
• Adjustable to accommodate varied wall corner angles
• Powder-coated aluminum/stainless for outdoor weather resistance

FLIR · CM-CAPS-G3

FLIR Pendant mount shroud kit for CM-640x DH-390 R-290 - CM-CAPS-G3

• Pendant mount shroud for FLIR CM-640x and DH-390 cameras
• Environmental protection for ceiling and soffit installs
• Powder-coated aluminum/stainless for outdoor weather

Geovision · 150-MT212P-000

Geovision 150-MT212P-000 Wall Box Mount

• Wall-mount box enclosure centralizes PoE power and cabling at the camera edge point.
• Protects power injectors, terminal blocks, and connectors from dust and moisture.
• Reduces conduit runs by housing Geovision-compatible hardware directly at the install site.

Geovision · 51-70PN300-0020

Geovision 51-70PN300-0020 Mount Kit for PN300/IP

• Fits all PN300/IP series cameras, eliminating compatibility guesswork on-site.
• Supports wall, ceiling, and pole orientations for flexible fixed-position deployments.
• All fasteners and hardware included—no sourcing additional parts before installation.

Geovision · 51-MT20610-0001

Geovision 51-MT20610-0001 Mount 206-1 Wall Box

• Enclosed metal wall box shields cabling, connectors, and junction points from weather.
• Purpose-built for Geovision form factors, ensuring consistent optical alignment across sites.
• Integral cable knockouts keep cord runs organized and out of the camera's field of view.

Geovision · 51-MT20810-0001

Geovision 51-MT20810-0001 Swan Neck Mount

• Articulated swan neck enables multi-axis camera positioning without relocating the bracket.
• Rigid base and reinforced neck tubing minimize vibration drift during active PTZ operation.
• Suits ceiling, wall, and pole installations in both covered and exposed environments.

Geovision · 51-MT20820-0001

Geovision 51-MT20820-0001 Swan Neck Mount

• Gooseneck profile allows ground-level camera repositioning without tools or lifts.
• Sealed pivot joints prevent water ingress, eliminating post-install maintenance calls.
• Mounts to wall, pole, or ceiling using standard hardware with no special conduit needed.

Geovision · 51-MT91200-P001

Geovision 51-MT91200-P001 GV-MOUNT 912 Power Box Mount

• Fits standard 19-inch EIA relay racks, eliminating custom shelving in control rooms.
• Centralized 24V AC power distribution simplifies per-device monitoring and emergency shutdown.
• Enclosed metal chassis protects PoE and auxiliary wiring in 24/7 surveillance deployments.

Geovision · 51-MTA9000-0001

Geovision 51-MTA9000-0001 Mounting Plate

• Mounting plate for Geovision ACControl access control hardware
• Integrated cable management for organized wire routing
• Indoor and protected outdoor placement on standard wall surfaces

Geovision · 72-RRL20-001

Geovision 72-RRL20-001 Rackmount Rail 20 Bays

• Holds up to 20 Geovision DVR/NVR modules in a single 19-inch rack stack.
• EIA-310-D compliant; fits standard 2-post and 4-post cabinets with 1.75-inch RU pitch.
• Built-in cable trays separate power, data, and video paths to reduce RF interference.

Geovision · 81-MT212P0-0001

Geovision 81-MT212P0-0001 Wall Ceiling Box Mount

• Mounts on wall or ceiling surfaces, eliminating redundant SKUs across mixed-deployment sites.
• Integrated cable management with strain relief reduces PTZ motor interference and install labor.
• Supports RS-485 control and PoE+ power delivery through a single structured cable path.

Geovision · 81-MT21300-0001

Geovision 81-MT21300-0001 Wall Ceiling Box Mount

• Mounts on walls or ceilings from a single bracket, eliminating duplicate SKUs per site.
• Box enclosure shields PoE connectors and cabling from dust, moisture, and accidental contact.
• Engineered fastener pattern fits Geovision IP PTZ form factors; no custom drilling required.

Geovision · GEO-150-MT913-000

Geovision GEO-150-MT913-000 Power Box Mount Bracket

• Secures Geovision power boxes in standard 19-inch racks for stable deployment.
• Reduces vibration and simplifies cable routing in dense rack environments.
• Supports centralized power distribution in rack-based surveillance installations.

Geovision · 51-MT20700-M001

Geovision Gv-Mount 207 51-MT20700-M001 Mount

• Engineered for Geovision IP PTZ cameras, ensuring proper load bearing under motor operation.
• Supports pole, wall, and ceiling installs, covering perimeter and facility-wide PTZ deployments.
• Minimal-fastener design reduces on-site assembly time and simplifies camera repositioning.