Lifesafety Power

Lifesafety Power · FPO150-B1002C8P2D8PE4M1

Lifesafety Power FPO150-B1002C8P2D8PE4M1

Lifesafety Power supervised power supply designed for security and access control installations where circuit integrity monitoring is required

• Supervised outputs detect wire breaks, shorts, and tampering in real time.
• Designed for access control and intrusion detection installs requiring circuit integrity monitoring.
• Fixed-format FPO150 series unit — verify panel compatibility before deployment.

Lifesafety Power · FPO75/150-E2

Lifesafety Power FPO75/150-E2 FPO75/150-E2

Dual-voltage access control and surveillance power supply designed to feed mid-scale security systems — door locks, readers, cameras, intercoms

• Dual-voltage output (12VDC/24VDC) feeds locks, readers, and cameras from one supply.
• Base 75W capacity expands to 150W via modules, scaling with growing access control loads.
• E2 enclosure protects internal components from dust, vibration, and incidental moisture.

Lifesafety Power · RGM75-D8PZ

Lifesafety Power RGM75-D8PZ RGM75-D8PZ

Rackmount power distribution module designed for access control and surveillance installations requiring integrated management of multiple electric

• 75W single-voltage (12V or 24V) output powers up to four door strikes without thermal overload.
• Four dedicated door channels plus eight fused auxiliary ports consolidate all rack power in 2U.
• 19-inch rackmount form factor centralizes power distribution, cutting cabling complexity at install.

Lifesafety Power · FPO75/150-C8D8E4

Lifesafety Power FPO75/150-C8D8E4 FPO75/150-C8D8E4

N industrial-grade power distribution unit designed to supply regulated direct current to distributed security and life-safety equipment in fixed

• Dual-output design powers multiple security devices from a single field-installed unit.
• Centralized power supervision simplifies monitoring of cameras, readers, and alarm loads.
• Standard hand-tool installation reduces deployment time in warehouse and enterprise sites.

Lifesafety Power · RC75/150-C16

Lifesafety Power RC75/150-C16 RC75/150-C16

1U rackmount power distribution and lock control module engineered for mixed-voltage access control systems that require centralized solenoid

• 16 independently relay-switched outputs let you control mixed 12V/24V locks from one unit.
• Dual rails (12V@6A and 24V@6A) eliminate external power bricks in multi-zone deployments.
• 1U rackmount form factor consolidates solenoid switching into a single 19-inch rack slot.

Lifesafety Power · FPO75-C8E1

Lifesafety Power FPO75-C8E1 FPO75-C8E1

75-watt industrial power enclosure designed to distribute regulated 12V or 24V DC power across eight independently fused outputs

• Eight independently fused 3A outputs isolate faults, preventing one failed device from killing the bus.
• Supports 12V or 24V DC distribution up to 75W total across locks, readers, and PoE injectors.
• E1 cabinet mounts in wall or rack environments, suiting IDF closets and comms room deployments.

Lifesafety Power · FPO150/250-2C8P2D8PE8M1

Lifesafety Power FPO150/250-2C8P2D8PE8M1

400W dual-voltage power supply enclosure designed for access control systems, security integrations, and surveillance infrastructure requiring

• 400W dual-voltage output delivers simultaneous 12V and 24V from a single enclosure.
• 16-circuit Mercury relay distribution supports mixed loads: sensors, locks, and readers.
• Verify 2C8P2D8PE8M1 relay map against your panel—not interchangeable across FPO series.

Lifesafety Power · RGM75-D8P

Lifesafety Power RGM75-D8P 75W power supply 6A/12V or 3A/24V

75W regulated DC power supply designed to support distributed IP cameras and network-powered security endpoints in small-to-medium installations

• Selectable 12VDC/6A or 24VDC/3A output eliminates stocking separate PSUs per voltage.
• 75W capacity supports 6–12 camera endpoints depending on per-device load profile.
• DIN-rail form factor integrates cleanly into centralized power enclosures and panels.

Lifesafety Power · FPO75/150-D8E4S

Lifesafety Power FPO75/150-D8E4S Power Supply Board 75W 6A/12V

75W fixed-output power supply board engineered for mid-scale surveillance and access control systems deployed in cabinet and rack environments

• Field-selectable 12VDC/6A or 24VDC/3A output consolidates mixed-voltage deployments.
• 75W budget supports multi-camera indoor racks with dome motors or door strike controllers.
• 35mm DIN-rail board-mount form factor installs directly inside standard surveillance cabinets.

Lifesafety Power · RD250/250-16

Lifesafety Power RD250/250-16 RD250/250-16

Rackmount DC power distribution unit designed for mid-to-large access control and surveillance installations requiring simultaneous 12V and 24V power

• Simultaneous 12V @ 20A and 24V @ 10A rails power mixed-voltage door hardware from one unit.
• 16 relay-switched lock outputs, each rated 2A, eliminate external distribution relay panels.
• Standard 19-inch rackmount form factor installs in any rack without special brackets.

Lifesafety Power · FPO150/250-2D8E2

Lifesafety Power FPO150/250-2D8E2 FPO150/250-2D8E2

Dual-channel redundant power supply designed for security installations requiring continuous uptime across multiple circuits

• Dual independent output channels let you isolate one circuit for maintenance without dropping the other.
• 150W or 250W rating supports mixed loads across camera arrays, access control, and auxiliary devices.
• Compatible with optional battery backup modules to maintain power to critical loads during mains failure.

Lifesafety Power · FPO75/250-2C82D8E4V1

Lifesafety Power FPO75/250-2C82D8E4V1 FPO75/250-2C82D8E4V1

150W rack-mount power supply designed to feed 16 independent fused outputs for access control systems, specifically Vertx door locks and auxiliary

• 150W rack-mount supply drives 16 independently fused outputs for access control circuits.
• Dual-voltage rails (12V DC / 24V DC) support Vertx locks and auxiliary devices from one unit.
• 24"H × 20"W × 4.5"D enclosure fits standard 19" relay racks alongside breakers and terminals.

Lifesafety Power · FPO150-B100C4D8E4A

Lifesafety Power FPO150-B100C4D8E4A FPO150-B100C4D8E4A

150-watt industrial enclosure power supply designed to deliver regulated power and battery backup support for distributed security systems, fire

• Delivers 150W regulated output across four channels for mixed 12/24VDC loads.
• Supports battery backup integration, keeping access control and fire panels online.
• Auto-sensing 110–240V AC input simplifies deployment across varied mains supplies.

Lifesafety Power · FPO75-D8PE4B

Lifesafety Power FPO75-D8PE4B FPO75-D8PE4B

75W DIN-rail mounted power supply engineered for distributed security deployments where multiple devices require centralized, protected power

• 75W DIN-rail supply delivers 8 independently supervised outputs for multi-zone deployments.
• Per-output supervision enables individual circuit fault isolation across mixed device types.
• Supports 12VDC or 24VDC input rails to fit existing facility power infrastructure.

Lifesafety Power · FPO150/250-2C82D8E4M1

Lifesafety Power FPO150/250-2C82D8E4M1 16-Door MCLASS

16-door MCLASS unified power system rated for 400W output at 24VDC

• 400W at 24VDC consolidates power for up to 16 doors in a single enclosure.
• Eliminates multiple discrete supplies, reducing wiring complexity and labor.
• 120VAC input with 24VDC output suits EM locks, strikes, and REX sensors.

Lifesafety Power · FPO75/150-C8D8E4S

Lifesafety Power FPO75/150-C8D8E4S FPO75/150-C8D8E4S

Compact, wall-mountable power distribution enclosure designed for small to mid-scale surveillance deployments

• Delivers 225W total across dual 12V and 24V outputs from a single enclosure.
• E4S form factor (24×20×4.5 in) mounts to 19-inch racks or wall surfaces.
• Supports mixed-voltage loads — IP cameras on 12V, access readers on 24V.

Lifesafety Power · FPO75/150-2C82D8E8M

Lifesafety Power FPO75/150-2C82D8E8M FPO75/150-2C82D8E8M

Compact, dual-output power supply designed to feed independent power rails in distributed security installations

Lifesafety Power · RC150B-C8D8

Lifesafety Power RC150B-C8D8 RC150B-C8D8

19-inch rackmount power distribution unit designed for access control installations requiring simultaneous dual-voltage DC output

• Simultaneous 12V@4A and 24V@4A rails eliminate a second PSU for mixed-voltage lock installs.
• 8 dedicated lock channels handle solenoid strikes and mag-locks across up to 8 doors per chassis.
• 8 isolated auxiliary relay outputs free lock channels for egress, door status, and alarm loads.

Lifesafety Power · FPO250-B1002C82D8E4

Lifesafety Power FPO250-B1002C82D8E4 FPO250-B1002C82D8E4

250W distributed power supply designed to feed 16 independently fused loads from a single enclosure — the workhorse for access control panels

• 16 independently fused 3A outputs prevent a single fault from cascading across zones.
• Dual-voltage 12V/4A and 24V/8A outputs support mixed-device installations from one enclosure.
• E4 form factor fits standard electrical cabinets without consuming rack space.

Lifesafety Power · FPO75-B100C4PD8PE2M

Lifesafety Power FPO75-B100C4PD8PE2M FPO75-B100C4PD8PE2M

75-watt regulated power supply designed for access control, door lock, and security device integration in commercial facilities

• Delivers 75W of regulated 24VDC power for access control and door lock loads.
• Single-enclosure design consolidates multi-peripheral power distribution, reducing cabinet clutter.
• Sized for commercial access control systems; upgrade to 120W+ models for higher-load installs.