Lifesafety Power

Lifesafety Power · E2X-BOXED

Lifesafety Power E2X-BOXED E2X Axis backplate 20x16x4.5

Backplate accessory from Lifesafety Power designed to mount behind Axis network cameras

• Purpose-built Axis camera backplate standardizes rough-in wiring and alignment.
• 20×16×4.5 in. profile fits standard North American 2-gang electrical boxes.
• Operates at 120VAC, integrating with standard North American power infrastructure.

Lifesafety Power · E2V-BOXED

Lifesafety Power E2V-BOXED E2V-Boxed

Note: Limited specification data is currently available for this model

• Boxed form factor enables compact, ready-to-install deployment in tight spaces.
• 16W power rating supports low-draw security devices without oversizing the supply.
• Integrates within Lifesafety Power families alongside access and surveillance gear.

Lifesafety Power · E2M1-DOOR-ONLY

Lifesafety Power E2M1-DOOR-ONLY QUICK GUIDE Mercury Backplat

250W 24V DC power supply purpose-built for access control and door-locking systems in mid-scale deployments

• 250W 24V DC supply handles 8–16 mag locks or electric strikes on a single unit.
• 24 relay outputs with per-output fail-secure/fail-safe selection eliminate external relay modules.
• E12 enclosure (48H×36W×8D) mounts directly in 19-inch racks without custom fabrication.

Lifesafety Power · E2M1-BOXED

Lifesafety Power E2M1-BOXED Enclosure E2M1 20x16x4.5 black

Compact field-mount steel enclosure designed for distributed power and control electronics in surveillance and access-control deployments

• Pre-installed 35mm DIN-rail backplate accepts power supplies, breakers, and relays without drilling.
• 20×16×4.5-inch black powder-coated steel body fits pole, wall, or overhead mounts in tight spaces.
• Hinged latched door allows fast component access without unmounting the enclosure from the wall.

Lifesafety Power · E1-BOXED

Lifesafety Power E1-BOXED Standard Power

Compact standard power enclosure from the Lifesafety Power E Series line, designed to deliver reliable DC power distribution in security and access

• Compact enclosure form factor suits cabinet, wall, or rack-mount deployments.
• Delivers isolated, supervised DC power feeds to multiple devices in one unit.
• Verify input voltage, output capacity, and circuit config before finalizing BOM.

Lifesafety Power · E12S-BOXED

Lifesafety Power E12S-BOXED Enclosure with main backplate

Compact equipment enclosure designed for security integrators deploying centralized power distribution, battery backup, and control modules in

• Integrated main backplate eliminates field-fabricated wiring rails, cutting install time.
• Supports DIN-rail mounted power supplies, relay modules, and auxiliary control equipment.
• Wall or rack mountable — suits equipment rooms, electrical closets, and control cabinets.

Lifesafety Power · E12S-BACKPLATE-ONLY

Lifesafety Power E12S-Backplate-Only E12S Backplate Only

Replacement backplate component for Lifesafety Power E12S series power supply systems

• Direct replacement backplate restores secure wall or rack mounting for E12S enclosures.
• Rated for 230VAC / 11W systems, matching original E12S power supply electrical specs.
• Supports vertical surface installation on drywall or metal frames for flexible deployment.

Lifesafety Power · E12M-BOXED

Lifesafety Power E12M-BOXED Multi-Purpose Enclosure

Multi-purpose power and access control enclosure engineered for modular access system installations

• 750W dual-voltage distribution supports up to 24-door access control deployments.
• Removable backplate enables full bench pre-wiring before on-site installation.
• 14-gauge welded steel with powder coat finish resists mechanical stress and corrosion.

Lifesafety Power · DUAL-BUSS-HARNESS-6FT-BOXED

Lifesafety Power DUAL-BUSS-HARNESS-6FT-BOXED

6-foot dual-bus power harness cable assembly engineered for supervised power distribution from Lifesafety Power supplies to multiple downstream loads

• 6-foot factory-terminated harness eliminates field crimping and reduces installation time.
• Dual-bus configuration enables load balancing across two independent power distribution lanes.
• Boxed packaging protects pre-terminated connectors for immediate deployment on arrival.

Lifesafety Power · CNV-16DRF-MERC-STRD

Lifesafety Power CNV-16DRF-MERC-STRD 16 Door Standard Mercury

16-door access control power supply designed for enterprise installations requiring distributed power across multiple access points

• Powers up to 16 doors from a single 24VDC, 150W distributed supply.
• Scales across warehouses and multi-tenant buildings where centralized power is impractical.
• Integrates within the Lifesafety Power 16-door modular access control ecosystem.

Lifesafety Power · C8P-BOXED

Lifesafety Power C8P-BOXED C8P-BOXED

Compact boxed power supply and battery backup module designed for multi-camera and access control deployments requiring power continuity during mains

• 8 independent 24VDC outputs consolidate backup power for cameras, readers, and sensors.
• Integrated battery backup keeps critical security devices online during AC mains loss.
• Boxed enclosure fits rack and wall-mount installs, reducing cabinet footprint and cable sprawl.

Lifesafety Power · C4-BOXED

Lifesafety Power C4-BOXED Lock output module 4 outputs fused

Compact four-channel output module designed to distribute supervised 12VDC power to access control hardware from a centralized logic platform

• Four independent 3A fused outputs prevent a single lock fault from disrupting other circuits.
• Supports mixed failsafe and fail-secure modes per output within the same installation.
• FAI-rated for fire alarm interface compatibility, meeting code requirements in life-safety deployments.

Lifesafety Power · BX75-C8D8E1

Lifesafety Power BX75-C8D8E1 8 Relay Control

N 8-output relay expansion module for Lifesafety Power access control systems

• 8 independently fused 3A relay outputs prevent a single lock fault from cascading.
• Per-output FAI selection enables fail-safe or fail-secure logic without rewiring.
• 8 auxiliary DC outputs (3A each, Bus1/Bus2 selectable) support status indicators per door.

Lifesafety Power · BX75-C4E1

Lifesafety Power BX75-C4E1 PoE 75W - 12V/24V

75-watt power supply designed to power networked access control systems and IP endpoints in integrated security deployments

• 75W PoE power supply with dual 12V/24V outputs
• 4 supervised relay outputs at 3A each
• Powers access control endpoints from PoE infrastructure

Lifesafety Power · BX75-BOXED

Lifesafety Power BX75-BOXED Single Voltage PoE

Single voltage PoE power supply engineered for mid-to-large IP security camera and access control deployments where consolidated power distribution

• 75W enclosed PoE supply consolidates power distribution for mid-to-large IP camera arrays.
• 24VDC regulated output with IEEE 802.3af/at compliance supports standard edge devices without adapters.
• DIN-rail or wall-mount enclosure fits electrical closets and equipment racks near AC mains feed.

Lifesafety Power · BX50-E5

Lifesafety Power BX50-E5 50W Single Voltag

Compact 50W single-voltage PoE power supply designed to centralize power distribution for small- to mid-scale IP security installations

• 50W PoE budget supports 8–12 typical IP cameras (4–6W each) from a single unit.
• 802.3af/at PoE over Cat5e or better eliminates separate DC cable runs to edge devices.
• Compact form factor fits wall-mount cabinets and cramped electrical closets cleanly.

Lifesafety Power · BX50-E1

Lifesafety Power BX50-E1 PoE Splitter 50W/75W

• Splits one PoE source into two outputs, supporting a combined 50W load.
• Compatible with 802.3af and 802.3at PoE injectors or switch ports.
• UL294/FAI listed, confirming compliance for commercial life-safety deployments.

Lifesafety Power · BX50-D8E1

Lifesafety Power BX50-D8E1 8 DC Outputs

Unified power supply combining FlexPower modules and access control hardware in one UL-listed enclosure

• 8 DC outputs each fused at 3A enable independent zone-level fault isolation.
• Automatic fire alarm disconnect unlocks doors instantly on alarm signal receipt.
• 120/230VAC dual-input accepts global supply voltages; 50W total output capacity.

Lifesafety Power · BT500-16R

Lifesafety Power BT500-16R PoE Injector 500W

1U rack-mount PoE injector designed to distribute centralized power to networked security cameras and IoT devices across distributed deployments

• Eight ports at up to 90W each support thermal cameras and high-draw PTZ units.
• 500W total PoE budget in a 1U rack footprint keeps high-density deployments organized.
• Universal AC 110–240V dual inputs provide redundant power for critical installations.

Lifesafety Power · BS1-BOXED

Lifesafety Power BS1-BOXED Single Battery Shelf

Single battery shelf bracket designed to mount and organize backup battery units within UPS enclosures and power distribution cabinets

• Dedicated single-battery shelf isolates terminals from vibration, reducing connection wear.
• Standard 19-inch rack form factor integrates with modular security and UPS cabinets.
• Organized cable routing reduces terminal strain and speeds up battery replacement cycles.