Lifesafety Power products
-
Lifesafety Power
SKU: FPO150/250-2C82D8E8P
Lifesafety Power FPO150/250-2C82D8E8P Dual FPO Buss/Flex Cable Ki
- Supports C4 and C8 jumper configs for flexible daisy-chain or parallel FPO wiring.
- Compatible with FPO75, FPO150, and FPO250 series modular power supplies.
- Includes D8 config guide and FPO75–250 quick reference for accurate module sequencing.
$2,536.00 $1,665.99 Save $870.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8PE8M1/P16-A
Lifesafety Power FPO150/250-2C82D8PE8M1/P16-A 400W Dual Voltage
- Dual 12V/24V output rails power mixed lock and reader loads from one chassis.
- 16 supervised relay lock outputs plus 16 auxiliary outputs support medium-scale deployments.
- 120V AC input on a dedicated 20A circuit delivers up to 400W total system capacity.
$4,696.00 $3,084.99 Save $1,611.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8PE8M
Lifesafety Power FPO150/250-2C82D8PE8M 150W power supply 12A/12V
- 16 relay lock outputs—each fused at 3A and configurable failsafe, failsecure, or FAI.
- Scales from 150W to 250W, supporting 12A/12V or 20A/12V without changing enclosures.
- 16 Class 2 aux outputs at 2.5A each serve RTE, sensors, or supervised devices per door.
$2,405.00 $1,579.99 Save $825.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8E6A1/P16-C
Lifesafety Power FPO150/250-2C82D8E6A1/P16-C 150W power supply
- Supports 16 doors with independently fused 3A relay outputs selectable per-door fail-state.
- Delivers 150W/12VDC or 250W/24VDC to match existing system voltage without rewiring.
- 16 auxiliary DC outputs route sensor and status signals on Bus1/Bus2 without consuming lock capacity.
$3,733.00 $2,451.99 Save $1,281.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8PE4
Lifesafety Power FPO150/250-2C82D8PE4 FPO150/250-2C82D8PE4
- Dual-channel output eliminates single points of failure in mission-critical deployments.
- Supports 12VDC or 24VDC rails for IP cameras, access panels, and alarm devices.
- DIN rail or cabinet wall mount accommodates standard security enclosure installations.
$1,364.00 $895.99 Save $468.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8E8S-VZ02
Lifesafety Power FPO150/250-2C82D8E8S-VZ02 150W power supply 12A
- 32 independently fused outputs (16 relay + 16 DC aux) isolate faults per circuit.
- Per-circuit FAI/failsafe/failsecure selection meets mixed door-security requirements.
- E8 enclosure mounts on Software House back plates, fitting existing AC infrastructure.
$4,397.00 $2,888.99 Save $1,508.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8E8M
Lifesafety Power FPO150/250-2C82D8E8M Power supply board 150W
- Simultaneous 12VDC and 24VDC outputs support mixed-voltage deployments on one unit.
- 16 onboard relay channels eliminate external relay modules, reducing rack space and wiring.
- 36H × 30W × 4.5D inch enclosure fits standard 19-inch rack and wall-mount installations.
$2,405.00 $1,579.99 Save $825.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2C82D8E8A/P16-A
Lifesafety Power FPO150/250-2C82D8E8A/P16-A 16DR E8A 400W 12A/12
- 400W redundant supply delivers 12A at 12V and 10A at 24V for dual-voltage loads.
- 16 discrete relay outputs support up to 16 independently controlled doors or zones.
- Dual 8DBC Panduit connectors simplify terminal block wiring on large-scale installations.
$4,143.00 $2,721.99 Save $1,421.01The item has been added -
Lifesafety Power
SKU: FPO150/150-C8PD8PE2
Lifesafety Power FPO150/150-C8PD8PE2 8 lock 8 auxiliary outputs
- Distributes 150W across 8 lock outputs and 8 auxiliary channels from a single unit.
- Each output is current-limited to 2.5A, preventing channel interaction under mixed loads.
- Supports 12V (12A) or 24V (6A) operation, compatible with Honeywell, Salto, and Allegion panels.
$1,047.00 $687.99 Save $359.01The item has been added -
Lifesafety Power
SKU: FPO150/150-C8D8PE4M
Lifesafety Power FPO150/150-C8D8PE4M FPO150/150-C8D8PE4M
- 150W redundant supply with dual AC inputs automatically fails over if primary source drops.
- Multiple regulated outputs power cameras, door locks, and intercoms from one enclosure.
- Supports standalone or N+1 redundant pair deployment for fault-tolerant 24/7 systems.
$1,208.00 $793.99 Save $414.01The item has been added -
Lifesafety Power
SKU: FPO150/150-C8D8E4
Lifesafety Power FPO150/150-C8D8E4 Power Supply
- Dual independent 150W channels enable isolated power paths for separate security zones.
- Single-enclosure dual-channel design simplifies rack or wall-mount deployments.
- Per-channel fault isolation prevents a single power failure from cascading across zones.
$1,203.00 $790.99 Save $412.01The item has been added -
Lifesafety Power
SKU: FPO150/150-C8D8E2
Lifesafety Power FPO150/150-C8D8E2 Power Supply Board Output 12A
- Dual 150W isolated channels (12A@12V or 6A@24V) prevent fault cascade across zones.
- Per-channel fault isolation lets you troubleshoot loads without powering down the system.
- DIN-rail E2 form factor fits standard equipment cabinets with minimal rack footprint.
$1,047.00 $687.99 Save $359.01The item has been added -
Lifesafety Power
SKU: FPO150/150-2C8P2D8PE4
Lifesafety Power FPO150/150-2C8P2D8PE4 16 lock 16 auxiliary outpu
- Feeds 16 dedicated lock circuits at 2.5A each, eliminating home-run wiring to the main panel.
- 16 auxiliary output circuits in 12V/12A or 24V/6A config support mixed ancillary device loads.
- 150W E4-rated enclosure suits standard indoor commercial multi-door access control deployments.
$1,345.00 $883.99 Save $461.01The item has been added -
Lifesafety Power
SKU: FPO150/150-2C8P2D8PE2M
Lifesafety Power FPO150/150-2C8P2D8PE2M 150W power supply 12A/12
- Delivers 12A at 12VDC or 6A at 24VDC to power locks, solenoids, and aux circuits.
- 8 relay outputs are individually selectable for failsafe, failsecure, or FAI mode.
- 16 total class-2 channels; 8 aux outputs assignable to Bus1 or Bus2 for supervision.
$1,309.00 $859.99 Save $449.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2M8NLCSD16E8M2
Lifesafety Power FPO150/250-2M8NLCSD16E8M2 150W power supply 12A
- 8 individually fused 3A outputs isolate faults per device, preventing system-wide outages.
- Dual-supply topology delivers up to 20A @ 12VDC or 10A @ 24VDC on the 250W configuration.
- E8 enclosure (36H×30W×6.5D in.) supports rack or wall mount for dense multi-endpoint wiring.
$3,452.00 $2,267.99 Save $1,184.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE8M1
Lifesafety Power FPO150/250-2D8P2M8NLCE8M1 150W power supply 12A
- Eight individually fused 2.5A outputs isolate faults without disrupting the full system.
- Dual-bus architecture lets you segregate cameras, readers, and auxiliaries on one supply.
- Switchable 150W or 250W capacity supports 12VDC or 24VDC per output to match device needs.
$3,217.00 $2,112.99 Save $1,104.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150/250-2D8P2M8NLCE4M1
Lifesafety Power FPO150/250-2D8P2M8NLCE4M1 150W power supply 12A
- Dual-bus architecture isolates faults so a failed circuit doesn't drop remaining outputs.
- Eight class-2 auxiliary outputs at 2.5A each support cameras, readers, and locks independently.
- Scales from 150W/12A to 250W/20A at 12V to match site load growth without chassis swap.
$2,266.00 $1,488.99 Save $777.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D8P2M8NLCE6M1
Lifesafety Power FPO150/250-2D8P2M8NLCE6M1 150W power supply 12A
- Field-selectable 150W or 250W output supports 12VDC and 24VDC endpoints from one unit.
- Eight 3A fused outputs assign independently to Bus 1 or Bus 2, reducing single-point failure.
- Eight class 2 aux outputs at 2.5A each support mixed loads: cameras, relays, and intercoms.
$2,636.00 $1,731.99 Save $904.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE8S
Lifesafety Power FPO150/250-2D82M8NLCE8S 150W power supply 12A/1
- Dual-bus architecture with 8 individually fused 3A outputs prevents single-endpoint failures from cascading.
- Scales from 150W to 250W and supports both 12VDC and 24VDC to match existing infrastructure.
- E8 enclosure (36H×30W×6.5D in.) fits standard 19-inch racks or wall-mount equipment rooms.
$3,026.00 $1,987.99 Save $1,038.01The item has been added -
Lifesafety Power
SKU: FPO150/250-2D82M8NLCE8M2
Lifesafety Power FPO150/250-2D82M8NLCE8M2 150W power supply 12A
- Dual-bus 12VDC/24VDC distribution isolates faults per output, preventing cascade failures.
- Eight independently fused 3A outputs let you assign and isolate circuits across two voltage rails.
- Scales from 150W (12A) to 250W (20A) at 12V to match growing camera or reader endpoint loads.
$3,149.00 $2,068.99 Save $1,080.01The item has been added