Lifesafety Power products
-
Save $156.01
Add to Cart The item has been addedLifesafety Power FPV104-D8E1 10A/24V 8 Auxillary Outputs
10-amp 24VDC regulated power supply with 8 separately supervised auxiliary outputs, designed for integrators deploying access control, intrusion
- 10A at 24VDC regulated output powers multiple readers, strikes, and sensors from one source.
- 8 independently supervised auxiliary outputs enable per-circuit fault detection and isolation.
- Cabinet-mount design centralizes distributed 24VDC power for access control and intrusion panels.
Usually Ships in 2-3 Weeks Free shipping over $499$456.00 $299.99 Save $156.01 -
Save $166.01
Add to Cart The item has been addedLifesafety Power FPV104-2D8E1 10A/24V 16 Auxillary Outputs
Regulated 24VDC power supply rated at 10 amps output, designed to feed multiple downstream security devices and control circuits in integrated access
- Regulated 24VDC at 10A powers up to 16 downstream devices from one source.
- 16 auxiliary outputs reduce panel footprint and simplify access control wiring.
- Supports cameras, electric strikes, mag locks, and relay modules on a 24V rail.
Usually Ships in 2-3 Weeks Free shipping over $499$486.00 $319.99 Save $166.01 -
Save $174.01
Add to Cart The item has been addedLifesafety Power FPV102-R8E1 10A/12V 8 Lock Outputs
12-volt regulated power supply rated for 10 amperes maximum output, configured with 8 independent relay lock outputs
- Centralized 12V/10A regulated supply drives up to 8 independent relay lock outputs.
- Eight onboard relay outputs eliminate discrete relay banks in access control cabinets.
- Cabinet-mount form factor suits mag locks, electric strikes, and REX device deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$508.00 $333.99 Save $174.01 -
Save $129.01
Add to Cart The item has been addedLifesafety Power FPV102-E1 10A/12V Ps/Enclosure
10-ampere, 12-volt power supply housed in a dedicated equipment enclosure
- Delivers 10A at 12VDC (120W) to power 4–6 IP cameras or mixed access control loads.
- Enclosed form factor shields power electronics from moisture and accidental contact.
- Centralizes 12VDC distribution from a single node, simplifying multi-device wiring.
Usually Ships in 2-3 Weeks Free shipping over $499$376.00 $246.99 Save $129.01 -
Save $138.01
Add to Cart The item has been addedLifesafety Power FPV102-D8E1 10A/12V 8 Auxillary Outputs
12VDC, 10-ampere power supply engineered to distribute power across multiple security devices in a single installation
- 12VDC at 10A total output powers up to 10 one-amp cameras from one supply.
- Eight isolated auxiliary outputs improve fault isolation—one tripped circuit won't drop others.
- Consolidates distributed 12V loads, eliminating separate transformers per device in the rack.
Usually Ships in 2-3 Weeks Free shipping over $499$403.00 $264.99 Save $138.01 -
Save $154.01
Add to Cart The item has been addedLifesafety Power FPV102-2D8E1 10A/12V 16 Auxillary Outputs
Compact 12VDC power distribution module rated at 10 amps continuous output, designed to supply and manage power to multi-camera surveillance systems
- 10A continuous at 12VDC supports 8–12 fixed cameras or mixed PTZ and relay loads.
- 16 auxiliary outputs allow independent fusing and fault isolation per downstream device.
- Centralized distribution eliminates stacked wall supplies, reducing wiring complexity.
Usually Ships in 2-3 Weeks Free shipping over $499$449.00 $294.99 Save $154.01 -
Save $243.01
Add to Cart The item has been addedLifesafety Power FPO75-E4S 75W Power Supply
Compact power supply board rated for 75W output, delivering either 6A at 12VDC or 3A at 24VDC
- Delivers 75W output at 6A/12VDC or 3A/24VDC from a single board SKU.
- Board form factor fits cabinet- or wall-mount enclosures where space is limited.
- Dual-voltage output eliminates separate SKUs for mixed 12V and 24V deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$710.00 $466.99 Save $243.01 -
Save $243.01
Add to Cart The item has been addedLifesafety Power FPO75-E4M Backplate - E4 Enclosure
75W power distribution unit housed in a steel E4 enclosure with Mercury/LNL backplate — the right choice when you need to feed multiple access
- 75W output delivers 6A @ 12V or 3A @ 24V to match field device voltage needs.
- Steel E4 enclosure provides a compact, wall-mounted housing for tidy installations.
- Mercury/LNL backplate simplifies wiring connections for access control deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$710.00 $466.99 Save $243.01 -
Save $194.01
Add to Cart The item has been addedLifesafety Power FPO75-E2M Backplate - E2 Enclosure
75W auxiliary power supply housed in a compact E2 metal enclosure with Mercury/LNL backplate integration
- 75W power supply with Mercury/LNL backplate integration
- 6A @ 12V or 3A @ 24V output for access control loads
- Compact E2 metal enclosure for door-side install
Usually Ships in 2-3 Weeks Free shipping over $499$567.00 $372.99 Save $194.01 -
Save $155.01
Add to Cart The item has been addedLifesafety Power FPO75-E2 6A/12V Or 3A/24V E2 Enclosure
75W regulated power supply designed for access control systems, alarm panels, and distributed IP security equipment where reliable 12VDC or 24VDC
- Selectable 6A/12V or 3A/24V output eliminates separate SKUs for mixed-voltage sites.
- 75W regulated output sustains main ACU plus multiple readers without brownout risk.
- E2 enclosure fits standard wall-mount and DIN-rail deployments in equipment rooms.
Usually Ships in 2-3 Weeks Free shipping over $499$452.00 $296.99 Save $155.01 -
Save $127.01
Add to Cart The item has been addedLifesafety Power FPO75-E1 75W Svps E1 Cabinet
75W SVPS (Switched-Mode Power Supply) housed in a compact E1 cabinet enclosure
- Dual-voltage output (6A at 12VDC or 3A at 24VDC) supports mixed-device deployments.
- 75W power budget covers up to six 12W cameras plus auxiliary sensors in one unit.
- Compact E1 cabinet enclosure enables wall-mount installation in tight IDF spaces.
Usually Ships in 2-3 Weeks Free shipping over $499$372.00 $244.99 Save $127.01 -
Save $413.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PW1M 75W Single Voltage
75W single-voltage power supply rated for 120 VAC input, equipped with 8 auxiliary outputs
- 75W capacity powers up to 8 auxiliary outputs from a single centralized source.
- 120 VAC input integrates directly into standard circuits without additional conversion.
- Eight parallel ports eliminate daisy-chained adapters in camera and access control runs.
Usually Ships in 2-3 Weeks Free shipping over $499$1,206.00 $792.99 Save $413.01 -
Save $372.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PNLCE4M 75W Single Voltage 120 VAC
120VAC single-voltage power supply rated at 75W, designed to centralize power distribution for networked security devices in small to mid-scale
- 75W single-voltage output centralizes power for multiple low-current security loads.
- 120VAC input aligns with standard dedicated AC circuits, reducing distribution complexity.
- Single-voltage design cuts transformer overhead and lowers installation labor on uniform rails.
Usually Ships in 2-3 Weeks Free shipping over $499$1,084.00 $711.99 Save $372.01 -
Save $436.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE6M FPO75-D8PE6M
75-watt power supply and battery backup unit designed to maintain continuous operation of networked security devices during mains power loss
- 75W regulated DC output sustains cameras and access readers during mains failure.
- Multi-output terminal design allows modular power distribution across several endpoints.
- Compact form factor supports wall-mount or rack installation in network closets and IDF rooms.
Usually Ships in 2-3 Weeks Free shipping over $499$1,271.00 $834.99 Save $436.01 -
Save $315.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE4M1 Power supply board 75W 6A/12Vor 3
75W compact power distribution board designed to centralize and manage power delivery to networked IP cameras , access control readers, and allied
- Selectable 12VDC/6A or 24VDC/3A output matches most IP camera and reader requirements.
- Centralized 75W distribution eliminates individual wall transformers at each endpoint.
- Single-board hub simplifies troubleshooting across multi-door or multi-camera deployments.
Usually Ships in 2-3 Weeks Free shipping over $499$919.00 $603.99 Save $315.01 -
Save $259.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE4H 75W Power Supply
75-watt power supply designed to distribute regulated voltage across access control, intercoms, and security endpoint infrastructure in mid-scale
- Dual-voltage output (12VDC/6A and 24VDC/3A) supports mixed-voltage endpoint deployments.
- Eight supervised auxiliary outputs enable centralized, monitored power distribution per channel.
- PTC polyswitch protection self-resets after overcurrent, eliminating fuse replacement on site visits.
Usually Ships in 2-3 Weeks Free shipping over $499$755.00 $495.99 Save $259.01 -
Save $262.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE2VM/P FPO75-D8PE2VM/P
12VDC/24VDC auxiliary power distribution enclosure designed to serve as a secondary power feed for surveillance system peripherals — card readers
- Delivers 6A at 12VDC or 3A at 24VDC across eight Class II power-limited outputs.
- 20"H × 16"W × 4.5"D enclosure mounts in standard electrical closets or cabinets.
- Centralizes auxiliary power for card readers, electric locks, and sensor loops.
Usually Ships in 2-3 Weeks Free shipping over $499$764.00 $501.99 Save $262.01 -
Save $143.01
Add to Cart The item has been addedLifesafety Power FPO75-D8PE1 FPO75-D8PE1
75W Class 2 auxiliary power supply designed to feed multiple low-voltage devices from a single source
- 8 independent Class 2 outputs, each fused at 2.5A, prevent cascade failures.
- 75W capacity delivers 6A at 12VDC or 3A at 24VDC from a single supply point.
- E1 enclosure suits indoor control rooms, closets, and equipment cabinet installs.
Usually Ships in 2-3 Weeks Free shipping over $499$419.00 $275.99 Save $143.01 -
Save $258.01
Add to Cart The item has been addedLifesafety Power FPO75-D8E4S FPO75-D8E4S
75-watt regulated power supply designed to support distributed security infrastructure deployments
- 75W total output powers cameras, readers, locks, and aux devices from one supply.
- Multiple independent output channels let you balance load distribution across circuits.
- Centralized sourcing eliminates per-endpoint adapters, simplifying conduit runs.
Usually Ships in 2-3 Weeks Free shipping over $499$753.00 $494.99 Save $258.01 -
Save $269.01
Add to Cart The item has been addedLifesafety Power FPO75-D8E4P FPO75-D8E4P
75-watt supervised power supply engineered for access control, alarm signaling, and distributed security loads where output monitoring and battery
- 8 supervised outputs detect open circuits and load faults, alerting the control panel instantly.
- 75W capacity supports multiple card readers, electric locks, or siren circuits from one unit.
- Battery backup ready — maintains door lock power during AC loss without additional hardware.
Usually Ships in 2-3 Weeks Free shipping over $499$784.00 $514.99 Save $269.01