Vivotek FD9387-EHTV-V3 vs Vivotek MD8564-EH-V2: Specification Comparison
Both the Vivotek FD9387-EHTV-V3 and the MD8564-EH-V2 are 5MP outdoor vandal-resistant dome cameras from Vivotek, sharing PoE 802.3af power, IK10 impact resistance, H.265 compression, WDR Pro, and Day/Night IR. Where they diverge is application focus: the FD9387-EHTV-V3 is a fixed-infrastructure surveillance dome with a motorized varifocal lens, while the MD8564-EH-V2 is engineered for vehicle and fleet-mounted deployment with a fixed wide-angle lens, higher ingress protection, and an M12 ruggedized connector.
In This Guide
How do the imaging specs compare?
Both cameras deliver 5MP resolution. The FD9387-EHTV-V3 uses a motorized 7–22mm P-iris lens with 3.1× optical zoom, giving installers remote focal-length adjustment without physically repositioning the camera. Its IR illumination reaches 50 meters, minimum illumination is rated at 0 lux with IR active, and WDR PRO is specified. The MD8564-EH-V2 uses a fixed 3.6mm f/2.0 lens on a 1/2.7-inch sensor, with minimum illumination of 0.1 lux color / 0.01 lux B&W / 0 lux with IR on, and the same 50-meter effective IR range. The fixed lens trades the FD9387's zoom flexibility for a wider, consistent field of view suited to close-range vehicle identification.
Frame-rate data is only specified for the MD8564-EH-V2: 30 fps at 2560×1920 (5MP) and 60 fps at 1920×1080 (1080p). No maximum frame rate is provided in the FD9387-EHTV-V3 specs. The MD8564-EH-V2 also specifies 48× digital ePTZ and a tool-free ±170° rotation with pan ±0°–25° and tilt 0°–+40°, useful for precise aim on a vehicle mount. The FD9387-EHTV-V3 specs do not list digital ePTZ or a rotation range. Both support MJPEG and H.264 in addition to H.265.
What about installation and environment?
The FD9387-EHTV-V3 carries IP66/IP67 and NEMA 4X ratings, covering jet-water ingress and salt-spray environments, and an operating temperature range of -40°C to 60°C — one of the widest ranges available in this class. The MD8564-EH-V2 steps up to IP68 (continuous submersion), which is critical for vehicle underbody or wash-down exposure, but its operating temperature range is narrower at -20°C to 55°C. Both are rated IK10.
The FD9387-EHTV-V3 connects via a standard RJ45 interface and is ceiling-mount oriented. The MD8564-EH-V2 uses an M12 Female 4-pin D-coded connector — the ruggedized standard for mobile and vehicle installations — and supports ceiling/wall mounting. Both draw power via PoE 802.3af; the MD8564-EH-V2 specifies under 13W max draw, while that figure is not stated for the FD9387-EHTV-V3. The FD9387-EHTV-V3 dimensions are not listed in the provided specs; the MD8564-EH-V2 is 241 × 162 × 83 mm.
Which fits your VMS and analytics better?
The MD8564-EH-V2 explicitly lists ONVIF Profile G, S, and T support and specifies a cybersecurity feature set including secure boot, signed firmware, IEEE 802.1x, digest authentication, HTTPS, brute-force attack detection, and session timeout. ONVIF compliance and ONVIF Profile G/S/T are not stated in the FD9387-EHTV-V3 specs as provided. The MD8564-EH-V2 also lists a Multimedia SoC processor with 2GB memory and Deep Learning Processing Unit (DLPU) analytics alongside VMD. The FD9387-EHTV-V3 specifies Object Analytics and Smart Stream III but does not list DLPU or a dedicated processor specification.
Both cameras support microSD on-board storage. The FD9387-EHTV-V3 specifies two-way audio; audio capability is not listed in the MD8564-EH-V2 specs. The FD9387-EHTV-V3's Smart Stream III is designed to reduce bandwidth and storage consumption on always-on deployments. Integrators requiring documented ONVIF Profile G for VMS edge-recording compliance will find that spec confirmed only on the MD8564-EH-V2 from the data provided.
Which should you choose: the FD9387-EHTV-V3 or the MD8564-EH-V2?
Our take: The FD9387-EHTV-V3 is the stronger choice when the deployment is a fixed outdoor infrastructure site requiring wide temperature tolerance, remote lens adjustment, and two-way audio. Its motorized 7–22mm P-iris lens spans a 3.1× optical zoom range — unavailable on the fixed 3.6mm MD8564-EH-V2 — its NEMA 4X and -40°C floor extend to harsher ambient conditions than the MD8564-EH-V2's -20°C limit, and its two-way audio is a specified feature absent from the MD8564-EH-V2's spec sheet. The MD8564-EH-V2 is the correct selection for vehicle or fleet-mounted applications: its IP68 rating exceeds the FD9387's IP67 for submersion scenarios, its M12 connector is the mobile industry standard, and its DLPU with documented ONVIF Profile G/S/T provides confirmed VMS edge-recording compatibility. Choose the FD9387-EHTV-V3 for fixed perimeter or facility use; choose the MD8564-EH-V2 for mobile, transit, or wash-down environments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Vivotek FD9387-EHTV-V3 | Vivotek MD8564-EH-V2 |
|---|---|---|
| Resolution | 5MP | 5MP |
| Image Sensor | Not specified | 1/2.7" |
| Lens / Focal Length | Motorized 7–22mm P-iris (3.1× optical zoom) | Fixed 3.6mm f/2.0 |
| Min Illumination | 0 lux (IR on) | 0.1 lux color / 0.01 lux B&W / 0 lux with IR |
| IR Range | 50m | 50m effective range |
| WDR | WDR PRO | WDR Pro |
| Max Frame Rate | Not specified | 30 fps @ 2560×1920; 60 fps @ 1920×1080 |
| Video Compression | H.265; H.264; MJPEG | H.265; H.264; MJPEG |
| IP Rating | IP66 / IP67 / NEMA 4X | IP68 |
| IK / Impact Rating | IK10 | IK10 |
| Operating Temperature | -40°C to 60°C | -20°C to 55°C |
| Power Input / PoE | PoE 802.3af | PoE 802.3af (under 13W max) |
| Network Connector | RJ45 (standard) | M12 Female 4-pin D-coded |
| Edge Storage | microSD card | microSD / SDHC / SDXC |
| Audio | Two-way audio | Not specified |
| ONVIF | Not specified | Profile G, S, T |
| Edge Analytics | Object Analytics; Smart Stream III | Deep Learning (DLPU); VMD |
| Cybersecurity | Not specified | Secure boot; signed firmware; IEEE 802.1x; HTTPS; digest auth; brute-force detection; session timeout |
| Dimensions | Not specified | 241 × 162 × 83 mm |
| Primary Application | Fixed outdoor infrastructure | Vehicle & fleet surveillance |
Frequently Asked Questions
Which should you choose: the FD9387-EHTV-V3 or the MD8564-EH-V2?
The FD9387-EHTV-V3 is the stronger choice when the deployment is a fixed outdoor infrastructure site requiring wide temperature tolerance, remote lens adjustment, and two-way audio. Its motorized 7–22mm P-iris lens spans a 3.1× optical zoom range — unavailable on the fixed 3.6mm MD8564-EH-V2 — its NEMA 4X and -40°C floor extend to harsher ambient conditions than the MD8564-EH-V2's -20°C limit, and its two-way audio is a specified feature absent from the MD8564-EH-V2's spec sheet. The MD8564-EH-V2 is the correct selection for vehicle or fleet-mounted applications: its IP68 rating exceeds the FD9387's IP67 for submersion scenarios, its M12 connector is the mobile industry standard, and its DLPU with documented ONVIF Profile G/S/T provides confirmed VMS edge-recording compatibility. Choose the FD9387-EHTV-V3 for fixed perimeter or facility use; choose the MD8564-EH-V2 for mobile, transit, or wash-down environments.
Is the FD9387-EHTV-V3 or MD8564-EH-V2 better for low-light performance?
Both reach 0 lux minimum illumination with IR active, and both specify a 50-meter effective IR range. The MD8564-EH-V2 additionally states 0.1 lux color and 0.01 lux B&W figures at f/2.0. The FD9387-EHTV-V3 does not list color/B&W lux thresholds in the provided specs, so a direct color-mode low-light comparison cannot be made from available data. IR capability is equivalent on paper.
Can the MD8564-EH-V2 handle being mounted on a vehicle in a car wash or rain environment better than the FD9387-EHTV-V3?
Yes, based on the provided specs. The MD8564-EH-V2 is rated IP68, meaning it is tested for continuous submersion — relevant for wash-down, heavy rain, and underbody vehicle mounting. The FD9387-EHTV-V3 is rated IP66/IP67, which covers water jets and temporary immersion but is not the same as IP68. The MD8564-EH-V2's M12 ruggedized connector also better suits mobile vibration environments versus a standard RJ45.
Which camera is easier to aim and adjust after installation?
The FD9387-EHTV-V3 offers a motorized 7–22mm P-iris lens adjustable remotely via the VMS or browser interface, eliminating the need to physically reposition the camera after mounting. The MD8564-EH-V2 has a fixed 3.6mm lens but provides 48× digital ePTZ and tool-free ±170° rotation with pan and tilt adjustments for initial physical aiming. Optical zoom flexibility post-installation belongs to the FD9387-EHTV-V3.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.