Ubiquiti U7-PRO-OUTDOOR-US vs TP-Link EAP775-WALL: Specification Comparison
The Ubiquiti U7-PRO-OUTDOOR-US and TP-Link EAP775-WALL are both Wi-Fi 7 access points, but they target fundamentally different deployment environments: one is a ruggedized outdoor AP designed for pole or wall mounting in exposed campus or industrial sites, while the other is an indoor wall-plate unit built for hallways and hospitality installs where ceiling mounting is impractical. Buyers selecting between them are typically choosing a deployment architecture, not just a radio. This comparison evaluates their RF capability, environmental and physical specifications, and management ecosystem fit.
In This Guide
- How do the RF capabilities and maximum throughput compare between these two Wi-Fi 7 access points?
- Which unit is rated for harsher physical environments and what are the mounting differences?
- How do the two units differ in management platform, compliance certifications, and ecosystem integration?
- Which should you choose: the U7-PRO-OUTDOOR-US or the EAP775-WALL?
- Side-by-Side Specs
- FAQ
How do the RF capabilities and maximum throughput compare between these two Wi-Fi 7 access points?
The U7-PRO-OUTDOOR-US is a tri-band Wi-Fi 7 (802.11be) access point operating on 2.4 GHz, 5 GHz, and 6 GHz simultaneously. Ubiquiti specifies a 5.8 Gbps maximum data rate on the 6 GHz radio at 320 MHz channel width, and 4.3 Gbps on the 5 GHz radio, with a 2.5 GbE uplink port that can sustain high aggregate throughput to the wired backhaul.
The EAP775-WALL carries a BE11000 aggregate designation, which TP-Link associates with an 11 Gbps combined figure across its bands. The provided specs confirm dual-band operation (2.4 GHz and 5 GHz) and Wi-Fi 7 support, but the spec data supplied does not break out per-radio throughput figures, does not confirm whether a 6 GHz radio is included, and does not specify the uplink port speed. The 'Frequency: 2.4 GHz and 5 GHz dual-band' entry explicitly lists only two bands. Buyers requiring a 6 GHz radio for Wi-Fi 7 MLO or spectrum relief cannot confirm that capability from the supplied EAP775-WALL specs.
Which unit is rated for harsher physical environments and what are the mounting differences?
The U7-PRO-OUTDOOR-US is purpose-built for outdoor deployment. It carries an IPX6 ingress protection rating for water resistance, an operating temperature range of -30°C to +60°C (-22°F to +140°F), and a UV-stabilized polycarbonate and aluminum alloy enclosure. It is rated to withstand wind loading of 74.6 N at 200 km/h (16.8 lbf at 125 mph). The unit mounts to poles between 1 and 2.5 inches (25–63.5 mm) in diameter or to a wall surface, and weighs 1.2 kg (2.6 lb). Power is supplied via PoE+ (802.3bt, 42.5–57V DC) at up to 21W.
The EAP775-WALL is a wall-plate form factor unit intended for indoor recessed or surface mounting — the product type designation and 'in-wall mount' description confirm indoor use. The supplied specs list an operating temperature described only as 'Industrial' without numeric values, and no IP ingress protection rating is provided in the spec data. No wind loading, enclosure material, or weight is specified. Power input is listed only as 'PoE' without a standard (802.3af/at/bt) or wattage figure. Installers should verify environmental ratings independently before any outdoor consideration.
How do the two units differ in management platform, compliance certifications, and ecosystem integration?
The U7-PRO-OUTDOOR-US is managed exclusively via Ubiquiti's UniFi ecosystem — UniFi Dream Machine, Cloud Gateway, or a UniFi Console is required. Management is wired Ethernet only; no standalone or cloud-only mode is documented in the supplied specs. The unit is certified FCC and IC, and is confirmed NDAA Section 889 compliant, which is a hard requirement for US federal, state, and many enterprise procurement programs. Certifications are explicitly listed in the spec data.
The EAP775-WALL is managed via TP-Link's Omada SDN platform and supports Access Point and Mesh operating modes. WPA3 encryption is confirmed. No FCC, IC, or NDAA compliance status is present in the supplied spec data. A 'hide_reason: pricing_violation_2026-05-06' flag appears in the product record, which may indicate the unit was not actively listed at the time of comparison; buyers should verify current availability and regulatory certifications directly with TP-Link or their distributor before procurement.
Which should you choose: the U7-PRO-OUTDOOR-US or the EAP775-WALL?
Our take: The U7-PRO-OUTDOOR-US is the stronger choice when the deployment site is outdoors, exposed to weather, or subject to federal NDAA procurement requirements. Its IPX6 rating and -30°C to +60°C operating range are verified against spec; the EAP775-WALL provides no IP rating and no numeric temperature range in the supplied data. On radio capability, the U7-PRO-OUTDOOR-US delivers a confirmed 5.8 Gbps 6 GHz radio and 2.5 GbE wired backhaul; the EAP775-WALL's 6 GHz band is not confirmed by the supplied specs despite the BE11000 designation. NDAA compliance is confirmed for the Ubiquiti unit and absent from the TP-Link spec data. The EAP775-WALL is the appropriate choice for in-wall hallway or hospitality installs within an Omada-managed network where a wall-plate physical form factor is required and outdoor exposure is not a factor. Buyers should not cross-deploy either unit outside its rated environment.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Ubiquiti U7-PRO-OUTDOOR-US | TP-Link EAP775-WALL |
|---|---|---|
| Wi-Fi Generation | Wi-Fi 7 (802.11be) | Wi-Fi 7 |
| Bands Confirmed | Tri-band: 2.4 GHz, 5 GHz, 6 GHz | Dual-band: 2.4 GHz, 5 GHz (6 GHz not confirmed in spec data) |
| Max Data Rate (6 GHz) | 5.8 Gbps (320 MHz BW) | — |
| Max Data Rate (5 GHz) | 4.3 Gbps | — |
| Aggregate Designation | — | BE11000 |
| Uplink Port | 1× 2.5 GbE RJ45 | — |
| Power Input | PoE+ (802.3bt), 42.5–57V DC | PoE (standard not specified) |
| Max Power Consumption | 21W | — |
| IP Rating | IPX6 | — |
| Operating Temperature | -30°C to +60°C | Listed as 'Industrial'; no numeric range in spec data |
| Wind Loading | 74.6 N at 200 km/h | — |
| Form Factor / Mount | Outdoor pole (1–2.5") or wall mount | Indoor wall plate |
| Weight | 1.2 kg (2.6 lb) | — |
| Management Platform | UniFi (wired Ethernet only) | Omada SDN |
| NDAA Section 889 Compliant | Yes | — |
| Certifications | FCC, IC | — |
| Encryption | — | WPA3 |
| Operating Modes | — | Access Point, Mesh |
| Warranty | Manufacturer warranty | — |
Frequently Asked Questions
Which should you choose: the U7-PRO-OUTDOOR-US or the EAP775-WALL?
The U7-PRO-OUTDOOR-US is the stronger choice when the deployment site is outdoors, exposed to weather, or subject to federal NDAA procurement requirements. Its IPX6 rating and -30°C to +60°C operating range are verified against spec; the EAP775-WALL provides no IP rating and no numeric temperature range in the supplied data. On radio capability, the U7-PRO-OUTDOOR-US delivers a confirmed 5.8 Gbps 6 GHz radio and 2.5 GbE wired backhaul; the EAP775-WALL's 6 GHz band is not confirmed by the supplied specs despite the BE11000 designation. NDAA compliance is confirmed for the Ubiquiti unit and absent from the TP-Link spec data. The EAP775-WALL is the appropriate choice for in-wall hallway or hospitality installs within an Omada-managed network where a wall-plate physical form factor is required and outdoor exposure is not a factor. Buyers should not cross-deploy either unit outside its rated environment.
Can the EAP775-WALL be installed outdoors like the U7-PRO-OUTDOOR-US?
Based on the supplied specifications, no. The U7-PRO-OUTDOOR-US carries an IPX6 water-resistance rating and a verified operating range of -30°C to +60°C with a UV-stabilized enclosure. The EAP775-WALL is described as a wall-plate unit with no IP ingress rating and no numeric temperature range listed in its spec data. Deploying the EAP775-WALL outdoors without confirmed IP and temperature ratings would be outside its documented design intent.
Is the U7-PRO-OUTDOOR-US or EAP775-WALL better for a government or federal network where NDAA compliance is required?
The U7-PRO-OUTDOOR-US is confirmed NDAA Section 889 compliant per its supplied specifications. The EAP775-WALL's spec data includes no NDAA compliance statement. For any procurement subject to NDAA Section 889 restrictions — federal agencies, contractors, and many state and local programs — the U7-PRO-OUTDOOR-US meets the documented requirement and the EAP775-WALL cannot be confirmed to do so from available spec data.
Which unit delivers higher confirmed throughput, and does the EAP775-WALL actually include a 6 GHz radio?
The U7-PRO-OUTDOOR-US specifies 5.8 Gbps on its 6 GHz radio and 4.3 Gbps on 5 GHz, with a 2.5 GbE uplink. The EAP775-WALL carries a BE11000 aggregate marketing designation but the supplied spec data lists only '2.4 GHz and 5 GHz dual-band' under Frequency with no 6 GHz band confirmed. Whether the EAP775-WALL includes a 6 GHz radio cannot be confirmed from the provided specifications; buyers requiring 6 GHz should verify directly with TP-Link before purchase.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.