Speco Technologies N8WA4P12TB vs Vivotek ND9323P: Specification Comparison
Both the Speco Technologies N8WA4P12TB and the Vivotek ND9323P are 8-channel network video recorders aimed at small-to-mid-size security deployments where a single appliance must handle camera ingestion, local storage, and playback. The Speco unit adds an integrated 4-door access control subsystem, making it a converged security appliance, while the Vivotek ships as a pure NVR bundle with four included 2MP IR turret cameras. Buyers evaluating these products are typically weighing unified physical-security management against a camera-inclusive starter kit with more detailed NVR feature depth.
In This Guide
- How do the two units compare on recording capacity, storage, and channel throughput?
- What are the physical, power, and environmental differences between the two appliances?
- Which unit offers broader integration, event management, and remote management capabilities?
- Which should you choose: the N8WA4P12TB or the ND9323P?
- Side-by-Side Specs
- FAQ
How do the two units compare on recording capacity, storage, and channel throughput?
The N8WA4P12TB ships with 12TB of internal storage pre-installed and records at up to 8MP (the spec lists 1280×720 pixel resolution separately, which is inconsistent with the 8MP channel claim; buyers should confirm with Speco). H.265 compression is supported at 30 fps. No recording throughput figure in Mbps is published in the provided specs.
The ND9323P ships with 2TB across dual 3.5-inch SATA bays (the bundle SKU ND9323P-2TB-4IB69), supports RAID 0 and RAID 1, and quotes a recording throughput of 64 Mbps with a 88 Mbps total network input/output ceiling. H.265, H.264, and MJPEG are all supported. The HDD maximum capacity ceiling is not specified in the provided spec sheet; Vivotek defers to a recommended HDD list on its website.
On raw pre-installed storage the N8WA4P12TB carries a 6× advantage (12TB vs. 2TB). The ND9323P's RAID 1 option adds redundancy not mentioned in the Speco spec set, and its 64 Mbps recording throughput figure gives integrators a concrete sizing number that the Speco spec does not supply.
What are the physical, power, and environmental differences between the two appliances?
The N8WA4P12TB measures 15.25 × 11.75 × 3.5 in (387 × 298 × 89 mm) and weighs 17.05 lbs (7.73 kg). It includes an integrated lock power supply for door-control hardware. PoE (802.3af) is listed for camera ports. Operating temperature, humidity range, and safety certifications are not stated in the provided spec data.
The ND9323P measures 366 (W) × 320.3 (D) × 46 (H) mm and weighs 2.5 kg without HDDs. It is powered by 100–240V AC (50/60Hz) and draws up to 175W maximum. Its PoE ports are listed as PoE+ in the tagline and power architecture field, though the spec table also cites 802.3af. Operating range is 0°C–40°C at 0–95% humidity. Certifications include CE, FCC, VCCI, C-Tick, UL, CB, BSMI, and BIS.
The ND9323P is significantly lighter and slimmer—a 1U-class form factor versus the Speco's deeper 3.5-in-tall chassis. The Speco unit's heavier weight (17.05 lbs vs. 5.5 lbs populated estimate) reflects its integrated access control hardware and larger internal drive bay. The ND9323P publishes a full certification list and environmental envelope; the Speco spec provides neither, which may affect procurement in regulated or international deployments.
Which unit offers broader integration, event management, and remote management capabilities?
The N8WA4P12TB differentiates on physical security convergence: it combines 8-channel NVR recording with a 4-door access control controller, an integrated lock power supply, and a unified video-and-access event timeline. Deep Learning analytics (DLPU) and People Counting are listed. Two-way audio is supported. No ONVIF compliance, VMS compatibility, protocol list, or remote access application is specified in the provided data.
The ND9323P publishes a detailed integration profile: ONVIF Profile S, VIVOCloud remote access, Shepherd and VAST 2 software AP support, and the iViewer mobile app for Android and iOS. Supported protocols include IPv4/IPv6, HTTPS, RTSP/RTP/RTCP, SMTP, FTP, DHCP, NTP, DNS, DDNS, and IP Filter. Event types cover Motion Detection, Smart VCA, PIR, Tampering, Camera DI/DO, Disk Failure, PoE error, and more. Trend Micro IoT Security and Cybersecurity Management are explicitly listed. Hardware + software watchdog and automatic power-recovery restart are specified. The ND9323P also supports fisheye dewarp (1O, 1R, 1O3R, 1O8R locally) and full PTZ operation.
The ND9323P's published integration depth is substantially greater for pure VMS/camera-ecosystem deployments. The N8WA4P12TB's access control integration is a unique capability the ND9323P does not offer at all; no equivalent door-controller functionality is present in the Vivotek spec set.
Which should you choose: the N8WA4P12TB or the ND9323P?
Our take: The N8WA4P12TB is the stronger choice when a single appliance must handle both video surveillance and physical access control for up to four doors, eliminating a separate access-control panel and its associated cabling. Its 12TB pre-installed storage (vs. 2TB on the ND9323P) and integrated lock power supply reduce third-party dependencies in that converged use case. Conversely, the ND9323P is the stronger choice for pure IP-camera deployments: it ships with four 2MP IR turret cameras included, publishes a 64 Mbps recording throughput figure, supports RAID 0/1 redundancy, and carries a full protocol and integration stack (ONVIF Profile S, VIVOCloud, VAST 2, Trend Micro IoT Security) not documented in the Speco spec. Its 3-year warranty on the Speco versus 2-year on the Vivotek is a modest but real advantage. Buyers running a Vivotek camera ecosystem or requiring ONVIF interoperability should favor the ND9323P; buyers needing access control convergence should favor the N8WA4P12TB.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Speco Technologies N8WA4P12TB | Vivotek ND9323P |
|---|---|---|
| Recording Channels | 8-channel NVR | 8-channel NVR |
| Access Control | 4-door integrated controller | — |
| Pre-installed Storage | 12TB | 2TB (dual 3.5" SATA) |
| Storage Range | 1TB–14TB (per channel spec) | Not specified; see Vivotek HDD list |
| RAID Support | Not specified | RAID 0, RAID 1 |
| Recording Throughput | Not specified | 64 Mbps |
| Video Codec | H.265 | H.265, H.264, MJPEG |
| Max Record Resolution | 8MP (spec also lists 1280×720) | Up to 4K decode; 2MP per included camera |
| Frame Rate | 30 fps | 30 fps |
| PoE Standard | PoE (802.3af) | PoE+ (802.3at listed in power field; 802.3af also cited) |
| Included Cameras | None specified | 4× 2MP IR turret cameras |
| Video Outputs | Not specified | HDMI ×1, VGA ×1 |
| ONVIF | Not specified | ONVIF Profile S |
| Alarm Inputs / Outputs | Not specified | 4 in / 1 out |
| Weight | 17.05 lbs (7.73 kg) | 2.5 kg without HDD |
| Warranty | 3 years | 2 years |
Frequently Asked Questions
Which should you choose: the N8WA4P12TB or the ND9323P?
The N8WA4P12TB is the stronger choice when a single appliance must handle both video surveillance and physical access control for up to four doors, eliminating a separate access-control panel and its associated cabling. Its 12TB pre-installed storage (vs. 2TB on the ND9323P) and integrated lock power supply reduce third-party dependencies in that converged use case. Conversely, the ND9323P is the stronger choice for pure IP-camera deployments: it ships with four 2MP IR turret cameras included, publishes a 64 Mbps recording throughput figure, supports RAID 0/1 redundancy, and carries a full protocol and integration stack (ONVIF Profile S, VIVOCloud, VAST 2, Trend Micro IoT Security) not documented in the Speco spec. Its 3-year warranty on the Speco versus 2-year on the Vivotek is a modest but real advantage. Buyers running a Vivotek camera ecosystem or requiring ONVIF interoperability should favor the ND9323P; buyers needing access control convergence should favor the N8WA4P12TB.
Can either NVR manage door access control, or do I need a separate panel?
Only the Speco N8WA4P12TB includes integrated 4-door access control with a built-in lock power supply and a unified video-and-access event timeline. The Vivotek ND9323P is a pure NVR; no access control functionality is specified in its provided spec data.
Which unit gives me more storage, and can either support a RAID configuration?
The N8WA4P12TB ships with 12TB pre-installed; the spec notes a range of 1TB–14TB for the channel, suggesting drive configurations vary. RAID support is not mentioned in the Speco spec. The ND9323P ships with 2TB across dual 3.5-inch SATA bays and explicitly supports RAID 0 and RAID 1, giving installers a redundancy option. Maximum HDD capacity for the ND9323P is deferred to Vivotek's recommended HDD list and is not stated in the provided spec.
Does either NVR work with third-party cameras and VMS platforms?
The ND9323P lists ONVIF Profile S compliance, VAST 2 and Shepherd software AP support, and a full IP protocol stack, making third-party camera and VMS integration well-documented. The Speco N8WA4P12TB does not publish ONVIF compliance, VMS compatibility, or a network protocol list in the provided spec data; buyers requiring confirmed third-party interoperability should verify directly with Speco before specifying the N8WA4P12TB.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.