Pelco SRXF3-8360-ES vs Pelco SRXF3-8360-I: Specification Comparison
Both the Pelco SRXF3-8360-ES and SRXF3-8360-I are members of the Sarix Fisheye 3 series — 8MP, 360° panoramic ceiling-mount cameras sharing the same sensor resolution, lens, PoE+ power class, analytics engine, and IK10 impact rating. The primary differentiator is deployment environment: the ES variant is weatherproofed for outdoor use, while the I variant is rated for indoor installation. Installers choosing between them are essentially selecting the appropriate ingress-protection and temperature envelope for their deployment site, not choosing between different imaging or analytics platforms.
In This Guide
How do the imaging specs compare?
Both cameras share an identical imaging core: 8MP resolution at 3264×2448 pixels (the ES datasheet lists this resolution; the I model's raw spec field shows 3840×2160 but the labeled max-resolution field also states 3264×2448 — buyers should confirm with Pelco), a 2.7 mm f/2.5 lens (aperture F2.0 per spec field), and 180°/360° fisheye field of view. Frame rate is 12.5 fps at full resolution for both. Minimum illumination is 0.10 lux on both models, with IR/850 nm day-night operation listed for each.
WDR is present on both, specified as 'Off Up to 83 dB' in the shared spec field. Video compression lists H.265 and H.264 for both units. No difference in imaging capability is indicated by the provided specifications; any resolution discrepancy in the I model's spec fields should be verified against the product datasheet before quoting.
What about installation and environment?
The SRXF3-8360-ES carries IP66, IP67 ratings — fully dust-tight and protected against powerful water jets and temporary immersion — making it suitable for outdoor soffits, building perimeters, parking structures, and other exposed locations. Its operating temperature range is −40°C to +60°C, enabling deployment in harsh cold climates. The SRXF3-8360-I is rated IP52, providing protection against dust ingress (limited) and dripping water only, and its operating temperature floor is −10°C to +60°C. Both units achieve IK10 impact resistance, share PoE+ (802.3at, Class 3) power input, and carry the same 153.5 mm × 153.5 mm × 71.3 mm dimensions and approximately 1.001 kg installed weight.
Mounting options listed are identical for both: wall, ceiling, pole, pendant, and corner. The ES model is explicitly designated 'Outdoor Ready'; the I model is designated 'Indoor' environment. Neither model should be used outside its rated IP envelope without additional enclosure.
Which fits your VMS and analytics better?
Integration capability is identical between the two models per the provided specifications. Both support ONVIF Profile S and Profile T, enabling compatibility with any conformant VMS platform. Pelco Smart Analytics with 8 behavior detections is built into both. Audio microphone support is listed for both. On-board microSD storage is available on both. Memory is specified as 4 GB RAM and 4 GB Flash on both. HTTPS encryption is confirmed on both. No differentiation in VMS compatibility, analytics depth, edge storage, or cybersecurity features is indicated by the supplied specifications.
Which should you choose: the SRXF3-8360-ES or the SRXF3-8360-I?
Our take: The SRXF3-8360-ES is the correct choice when the installation site is outdoors or subject to moisture, temperature extremes, or vandalism risk. The ES carries IP66/IP67 ratings versus the I model's IP52, and its operating temperature floor extends to −40°C versus −10°C for the I — a 30°C advantage in cold environments such as northern climates, loading docks, or unheated structures. Both units share IK10 impact resistance, so vandal deterrence is equivalent indoors or out. Where the deployment is genuinely interior — climate-controlled lobbies, retail floors, or office ceilings — the SRXF3-8360-I is the appropriate and typically less costly option, though pricing was not provided in these specifications. All imaging, analytics, compression, ONVIF, audio, and storage capabilities are identical between the two; the selection decision reduces entirely to rated ingress protection and temperature range for the target environment.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Pelco SRXF3-8360-ES | Pelco SRXF3-8360-I |
|---|---|---|
| Series | Sarix Fisheye 3 | Sarix Fisheye 3 |
| Max Resolution | 3264 × 2448 (8MP) | 3264 × 2448 (8MP)* |
| Lens / Focal Length | 2.7 mm f/2.5 | 2.7 mm f/2.5 |
| Aperture | F2.0 | F2.0 |
| Field of View | 180° / 360° | 180° / 360° |
| Min Illumination | 0.10 lux | 0.10 lux |
| IR / Day-Night | IR 850 nm; Day/Night | IR 850 nm; Day/Night |
| WDR | Up to 83 dB | Up to 83 dB |
| Max Frame Rate | 12.5 fps at full resolution | 12.5 fps at full resolution |
| Video Compression | H.265; H.264 | H.265; H.264 |
| IP Rating | IP66 / IP67 | IP52 |
| Impact Rating | IK10 | IK10 |
| Operating Temperature | −40°C to +60°C | −10°C to +60°C |
| Power Input / PoE Class | PoE+ (802.3at) / Class 3 | PoE+ (802.3at) / Class 3 |
| Edge Storage | microSD | microSD |
| Audio | Microphone supported | Microphone supported |
| ONVIF | Profile S; Profile T | Profile S; Profile T |
| Analytics | Pelco Smart Analytics; 8 behaviors | Pelco Smart Analytics; 8 behaviors |
| Environment Rating | Outdoor | Indoor |
| Dimensions | 153.5 × 153.5 × 71.3 mm | 153.5 × 153.5 × 71.3 mm |
| Weight (with wall mount) | 1.001 kg (2.21 lb) | 1.001 kg (2.21 lb) |
| Warranty | 5-year | 5-year |
Frequently Asked Questions
Which should you choose: the SRXF3-8360-ES or the SRXF3-8360-I?
The SRXF3-8360-ES is the correct choice when the installation site is outdoors or subject to moisture, temperature extremes, or vandalism risk. The ES carries IP66/IP67 ratings versus the I model's IP52, and its operating temperature floor extends to −40°C versus −10°C for the I — a 30°C advantage in cold environments such as northern climates, loading docks, or unheated structures. Both units share IK10 impact resistance, so vandal deterrence is equivalent indoors or out. Where the deployment is genuinely interior — climate-controlled lobbies, retail floors, or office ceilings — the SRXF3-8360-I is the appropriate and typically less costly option, though pricing was not provided in these specifications. All imaging, analytics, compression, ONVIF, audio, and storage capabilities are identical between the two; the selection decision reduces entirely to rated ingress protection and temperature range for the target environment.
Is the SRXF3-8360-ES or SRXF3-8360-I better for low light?
Neither has an advantage per the provided specifications. Both models are rated at 0.10 lux minimum illumination, use IR with 850 nm day-night operation, and list WDR up to 83 dB. Low-light performance is identical between the two variants.
Can the SRXF3-8360-I be installed in a covered outdoor area like a parking garage or canopy?
The SRXF3-8360-I is rated IP52, which protects only against limited dust ingress and dripping water. A covered but unenclosed outdoor area exposes the camera to humidity, windblown rain, and temperature swings below −10°C in many climates. For any outdoor or semi-outdoor location, the SRXF3-8360-ES with IP66/IP67 and a −40°C floor is the specified choice.
Do both cameras work with the same VMS and analytics platform?
Yes. Per the provided specifications, both the SRXF3-8360-ES and SRXF3-8360-I support ONVIF Profile S and Profile T, run Pelco Smart Analytics with 8 behavior detections, support microSD edge storage, and include microphone support. There is no differentiation in VMS compatibility or analytics capability between the two models.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.