Honeywell CN80G-L1N-5EN231F vs Datalogic 944900004

MOBILE COMPUTER COMPARISON

Honeywell CN80G-L1N-5EN231F vs Datalogic 944900004: Specification Comparison

Both the Honeywell CN80G-L1N-5EN231F and the Datalogic Memor 35 5G (944900004) are Android-based handheld mobile computers designed for enterprise field and warehouse use, each combining a barcode imager, wireless connectivity, and ruggedized construction. The Honeywell targets extended-range scanning applications on a proven Mobility Edge platform with 4G LTE, while the Datalogic emphasizes a larger display, 5G/Wi-Fi 6E connectivity, and a modern Android 13 GMS build. Buyers evaluating these two will weigh scan range versus display real estate, LTE versus 5G networking, and total device ruggedness.



Which device delivers superior scanning performance and range?

The Honeywell CN80G-L1N-5EN231F is equipped with the 6603ER Extended Range Imager, specified to capture 1D and 2D barcodes at distances up to 15.2 m. This is a purpose-built, long-range engine suited for warehouse rack scanning, dock operations, and distribution center workflows where codes may be located far from the operator.

The Datalogic Memor 35 5G (944900004) is fitted with a 1D/2D Area Imager supporting Code 128, Code 39, UPC, EAN, QR Code, Data Matrix, and PDF417 symbologies. However, the datasheet as provided does not specify a maximum scan distance for this imager. The Datalogic also adds NFC as an additional data-capture modality, which is not listed for the Honeywell.

For buyers whose workflows depend on reading barcodes at extended distances, the Honeywell's 15.2 m rated range is a concrete, documented specification advantage. The Datalogic's scan range is not specified in the provided data, so a direct distance comparison cannot be made.


How do the display size, wireless connectivity, and OS platform compare?

The Datalogic Memor 35 5G features a 6.0-inch Full HD+ (2160×1080) display protected by Corning Gorilla Glass 5, and includes dual cameras: 13 MP rear and 8 MP front. The Honeywell CN80G-L1N-5EN231F uses a 4.2-inch (854×480) display. The Datalogic's screen is approximately 43% larger by diagonal and offers significantly higher resolution, benefiting operators reviewing documents, maps, or complex workflows.

On wireless connectivity, the Datalogic supports 5G WWAN, Wi-Fi 6/6E (802.11ax), Bluetooth 5.2, and NFC. The Honeywell supports 4G LTE WWAN, Wi-Fi 5 (802.11ac) with 2x2 MIMO, and Bluetooth 5.0. No NFC is listed for the Honeywell. For deployments with 5G infrastructure or high-density Wi-Fi 6 access points, the Datalogic provides forward-looking radio compatibility.

The Honeywell runs Android (non-GMS) on the Honeywell Mobility Edge platform, which provides a standardized hardware and software environment for multi-generational OS upgrades. The Datalogic runs Android 13 with GMS, upgradable to Android 18 per provided specs, and includes Google Mobile Services for enterprises relying on Google ecosystem apps. Buyers locked into GMS or specific Android versions must account for these differences.


Which device is more rugged, and how do battery and form factor compare?

Both devices carry IP65 ingress protection. The Datalogic Memor 35 5G adds IP68 certification, indicating it is rated for temporary submersion in addition to dust exclusion, compared to the Honeywell's IP65/IP67. The Honeywell is rated for drops from 3.0 m at room temperature and 1.8 m across its temperature range, and references MIL-STD-810G testing at -20°C to concrete. The Datalogic cites MIL-STD-810H compliance; a specific drop height in meters is not provided in the supplied specifications.

Battery capacity favors the Honeywell at 5,800 mAh Li-Ion, rated for 12+ hours of continuous operation per provided data. The Datalogic carries a 4,680 mAh battery but adds safe-swap capability and wireless charging support, neither of which is listed for the Honeywell. Safe-swap allows battery replacement without powering down, a meaningful operational advantage in shift-based environments.

The devices differ substantially in physical form factor. The Honeywell measures 204×78×33.2 mm and weighs 500 g with battery. The Datalogic measures 78.5×168×17.8 mm and weighs 327 g. The Datalogic is significantly lighter (173 g less) and thinner (15.4 mm thinner), which affects operator comfort during extended handheld use. The Honeywell's greater depth reflects its dedicated scanner body design, while the Datalogic's profile is closer to a large-screen consumer device.


Which should you choose: the CN80G-L1N-5EN231F or the 944900004?

Our take: The CN80G-L1N-5EN231F is the stronger choice when extended-range barcode scanning, a higher-capacity battery, and a purpose-built rugged scanner body are the primary requirements. Its 6603ER imager is spec'd to 15.2 m—a distance the Datalogic's scan range spec does not address in provided data—its 5,800 mAh battery exceeds the Datalogic's 4,680 mAh cell by 24%, and it weighs in at a heavier but more scan-centric 500 g chassis. Conversely, the Datalogic 944900004 is the stronger choice when display quality, 5G/Wi-Fi 6E connectivity, safe-swap battery operation, NFC, and a lighter 327 g form factor drive the decision. Its 6.0-inch Full HD+ screen versus the Honeywell's 4.2-inch panel, dual cameras, and Android 13 GMS with upgrade path to Android 18 serve mobile workers who need rich on-screen interaction. Deployments on 5G networks or requiring GMS should prioritize the Datalogic.


Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

SpecificationHoneywell CN80G-L1N-5EN231FDatalogic 944900004
Product FamilyCN80Memor 35
ProcessorQualcomm Snapdragon 660 Octa-Core 2.2 GHzQualcomm QCM4490 Octa-Core 2.4 GHz
RAM4 GB6 / 8 GB
Internal Storage32 GB128 GB UFS
Storage ExpansionmicroSDmicroSD up to 2 TB
Display Size & Resolution4.2 in (854×480)6.0 in Full HD+ (2160×1080)
Operating SystemAndroid (non-GMS)Android 13 with GMS (upgradable to Android 18)
WWAN4G LTE5G
Wi-Fi802.11 a/b/g/n/ac (Wi-Fi 5), 2x2 MIMO802.11 a/b/g/n/ac/ax (Wi-Fi 6/6E)
Bluetooth5.05.2
NFCYes
Scan Engine6603ER Extended Range Imager (up to 15.2 m)1D/2D Area Imager (range not specified)
IP RatingIP65 / IP67IP65 / IP68
Drop Rating3.0 m room temp; 1.8 m across temp range (MIL-STD-810G)MIL-STD-810H (drop height not specified)
Battery5,800 mAh Li-Ion (12+ hr rated)4,680 mAh safe-swap with wireless charging
Weight (with battery)500 g (17.6 oz)327 g (11.5 oz)
Dimensions (mm)204 × 78 × 33.278.5 × 168 × 17.8
CameraNot included13 MP rear; 8 MP front

Frequently Asked Questions

Which should you choose: the CN80G-L1N-5EN231F or the 944900004?

The CN80G-L1N-5EN231F is the stronger choice when extended-range barcode scanning, a higher-capacity battery, and a purpose-built rugged scanner body are the primary requirements. Its 6603ER imager is spec'd to 15.2 m—a distance the Datalogic's scan range spec does not address in provided data—its 5,800 mAh battery exceeds the Datalogic's 4,680 mAh cell by 24%, and it weighs in at a heavier but more scan-centric 500 g chassis. Conversely, the Datalogic 944900004 is the stronger choice when display quality, 5G/Wi-Fi 6E connectivity, safe-swap battery operation, NFC, and a lighter 327 g form factor drive the decision. Its 6.0-inch Full HD+ screen versus the Honeywell's 4.2-inch panel, dual cameras, and Android 13 GMS with upgrade path to Android 18 serve mobile workers who need rich on-screen interaction. Deployments on 5G networks or requiring GMS should prioritize the Datalogic.

Is the CN80G-L1N-5EN231F or the 944900004 better for high-bay warehouse scanning?

The Honeywell CN80G-L1N-5EN231F is better suited for high-bay warehouse scanning. Its 6603ER Extended Range Imager is specified to read barcodes at distances up to 15.2 m, which directly addresses elevated rack and overhead label scenarios. The Datalogic Memor 35 5G's maximum scan distance is not stated in the provided specifications, so its suitability for long-range warehouse scanning cannot be confirmed from the available data.

Which device is better for field workers on a 5G network?

The Datalogic Memor 35 5G (944900004) is the appropriate choice for 5G deployments. It supports 5G WWAN and Wi-Fi 6/6E (802.11ax), which are not present on the Honeywell CN80G-L1N-5EN231F. The Honeywell is limited to 4G LTE WWAN and Wi-Fi 5 (802.11ac). If existing or planned infrastructure includes 5G cellular or Wi-Fi 6 access points, the Datalogic will leverage those networks; the Honeywell will not.

Can either device have its battery swapped without powering it off during a shift?

Yes, but only the Datalogic Memor 35 5G (944900004) is specified with a safe-swap battery, meaning the battery can be replaced without shutting down the device. The Datalogic also supports wireless charging. Neither safe-swap nor wireless charging is listed in the provided specifications for the Honeywell CN80G-L1N-5EN231F. For operations requiring continuous uptime across long shifts without device restarts, the Datalogic has a documented advantage in this area.



Get a Second Opinion on Your Camera Choice

Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.