Datalogic 944850001 vs Honeywell CK67-X0N-5EC1C2G: Specification Comparison
Both the Datalogic Memor 30 (SKU 944850001) and the Honeywell CK67-X0N-5EC1C2G are Android-based, IP65/IP68-rated rugged handheld mobile computers targeting warehouse, logistics, and field-mobility applications. They share the same Qualcomm QCS4490 SoC family, Wi-Fi 6E connectivity, Bluetooth 5.2, and microSD expandability. The comparison centers on three decision-relevant axes: display and ergonomics, scanning and data-capture capability, and battery and ruggedness credentials — the factors that most directly drive productivity and TCO in enterprise mobile deployments.
In This Guide
- Which device offers a better screen and ergonomic fit for the intended workflow?
- How do the scan engines and data-capture capabilities compare?
- Which device is built for harsher environments and longer shifts without a battery swap?
- Which should you choose: the 944850001 or the CK67-X0N-5EC1C2G?
- Side-by-Side Specs
- FAQ
Which device offers a better screen and ergonomic fit for the intended workflow?
The Datalogic Memor 30 ships with a 6.0-inch Full HD+ display at 2160 × 1080 resolution, protected by Corning Gorilla Glass 5, and weighs 313 g (0.69 lb). Its larger touchscreen targets workflows that benefit from reading dense data, navigating complex WMS interfaces, or capturing images, and its lighter weight reduces operator fatigue during extended shifts.
The Honeywell CK67-X0N-5EC1C2G uses a 4.3-inch display at 800 × 480 resolution, protected by Corning Gorilla Glass 7 — a newer glass generation. It weighs 516 g (18.2 oz / 1.14 lb), which is substantially heavier. The smaller, lower-resolution screen is more typical of traditional handheld gun-style form factors where one-handed grip and dedicated scan triggers matter more than display real estate.
Buyers should note that display size and pixel density directly affect readability of warehouse management applications, while the form factor difference (full-touch slab vs. traditional handheld) may dictate which device fits existing holsters, cradles, and operator training.
How do the scan engines and data-capture capabilities compare?
The Datalogic Memor 30 specifies a 1D/2D imager with a scanning range of 10 cm to 10 m, supporting QR Code and standard barcode symbologies. It also includes a 13 MP rear camera and an 8 MP front camera. NFC is confirmed present. The specific scan engine model is not named in the provided specifications.
The Honeywell CK67-X0N-5EC1C2G names its engine explicitly as the S0703 FlexRange Imager, rated for 1D/2D barcode reading. A 13 MP rear camera is also listed. NFC is confirmed as an integrated reader. The datasheet tagline cites 12–14 hours typical runtime but does not specify a numeric scan range in the provided specifications.
For deployments that require verified long-range scanning — such as high-bay rack picking — the Memor 30's stated 10 m maximum range is a concrete spec the CK67 specifications do not match with an equivalent figure. Buyers requiring a named, certified scan engine for device qualification processes will find the Honeywell's S0703 designation more immediately traceable.
Which device is built for harsher environments and longer shifts without a battery swap?
The Datalogic Memor 30 carries a 4,680 mAh safe-swap battery with wireless charging support, meaning operators can hot-swap batteries without powering down. It is rated IP65/IP68 and meets MIL-STD-810H. The drop specification in the provided data is cited as 6 ft (approximately 1.83 m) to concrete.
The Honeywell CK67-X0N-5EC1C2G carries a 7,000 mAh Li-Ion battery — 49% higher capacity than the Memor 30 — with a datasheet-cited typical runtime of 12–14 hours. It is also rated IP65/IP68. Its drop rating is 2.4 m (approximately 7.9 ft), exceeding the Memor 30's stated 6 ft drop spec. Operating temperature range is specified as -20°C to 50°C, with storage temperature -30°C to 70°C.
The CK67's larger battery and higher drop rating make it the stronger candidate for multi-shift operations without battery infrastructure, or for environments with elevated fall risk such as loading docks and cold-chain facilities. The Memor 30's safe-swap capability partially offsets its smaller battery if charging infrastructure is available on-site.
Which should you choose: the 944850001 or the CK67-X0N-5EC1C2G?
Our take: The CK67-X0N-5EC1C2G is the stronger choice when shift length, drop survivability, and cold-storage operating range are the primary requirements. Its 7,000 mAh battery exceeds the Memor 30's 4,680 mAh by 49%, its drop rating of 2.4 m (7.9 ft) surpasses the Memor 30's stated 6 ft, and its operating temperature floor of -20°C covers cold-chain environments where the Memor 30's temperature rating is not specified in the provided data. Conversely, the Memor 30 is the stronger choice when display quality, scan range, and weight matter most: its 6.0-inch 2160 × 1080 screen significantly outresolves the CK67's 800 × 480 panel, its stated 10 m scan range has no equivalent figure in the CK67 specs, and at 313 g it is 203 g lighter than the 516 g CK67. Platform qualifier: both devices use the Honeywell ScanPal (CK67) and Datalogic ecosystem respectively — existing MDM enrollments, cradle investments, and vendor support contracts should factor into the final selection.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Datalogic 944850001 | Honeywell CK67-X0N-5EC1C2G |
|---|---|---|
| Processor | Qualcomm QCS4490 Octa-Core 2.4 GHz | Qualcomm QCS4490 Octa-Core 2.0 GHz |
| RAM | 6 / 8 GB | 6 GB |
| Storage | 128 GB UFS Flash | 128 GB Flash |
| Storage Expansion | microSD up to 2 TB | microSD (capacity not specified) |
| Display Size | 6.0 in | 4.3 in |
| Display Resolution | 2160 × 1080 (Full HD+) | 800 × 480 |
| Display Glass | Corning Gorilla Glass 5 | Corning Gorilla Glass 7 |
| Operating System | Android 13 with GMS | Android with GMS (version not specified) |
| Wi-Fi | 802.11 a/b/g/n/ac/ax (Wi-Fi 6/6E) | 802.11 a/b/g/n/ac/ax (Wi-Fi 6E) |
| Bluetooth | 5.2 | 5.2 |
| NFC | Yes | Yes (integrated) |
| Scan Engine | 1D/2D Imager (model not specified) | S0703 FlexRange Imager (1D/2D) |
| Scan Range | 10 cm to 10 m | — |
| Camera (Rear) | 13 MP | 13 MP |
| Battery Capacity | 4,680 mAh (safe-swap, wireless charging) | 7,000 mAh Li-Ion |
| IP Rating | IP65/IP68 | IP65/IP68 |
| Drop Rating | 6 ft to concrete (MIL-STD-810H) | 2.4 m (7.9 ft) |
| Operating Temperature | — | -20°C to 50°C |
| Weight | 313 g (0.69 lb) | 516 g (18.2 oz / 1.14 lb) |
| Dimensions | Length 10 cm (full dims not specified) | 220 × 83 × 37 mm |
Frequently Asked Questions
Which should you choose: the 944850001 or the CK67-X0N-5EC1C2G?
The CK67-X0N-5EC1C2G is the stronger choice when shift length, drop survivability, and cold-storage operating range are the primary requirements. Its 7,000 mAh battery exceeds the Memor 30's 4,680 mAh by 49%, its drop rating of 2.4 m (7.9 ft) surpasses the Memor 30's stated 6 ft, and its operating temperature floor of -20°C covers cold-chain environments where the Memor 30's temperature rating is not specified in the provided data. Conversely, the Memor 30 is the stronger choice when display quality, scan range, and weight matter most: its 6.0-inch 2160 × 1080 screen significantly outresolves the CK67's 800 × 480 panel, its stated 10 m scan range has no equivalent figure in the CK67 specs, and at 313 g it is 203 g lighter than the 516 g CK67. Platform qualifier: both devices use the Honeywell ScanPal (CK67) and Datalogic ecosystem respectively — existing MDM enrollments, cradle investments, and vendor support contracts should factor into the final selection.
Is the Memor 30 or the CK67-X0N-5EC1C2G better for multi-shift operations without a charging station nearby?
Based on the provided specifications, the CK67-X0N-5EC1C2G is the better fit. Its 7,000 mAh battery carries a datasheet-cited runtime of 12–14 hours, compared to the Memor 30's 4,680 mAh. The Memor 30 does support hot-swap (safe-swap) batteries, which can extend effective uptime if spare batteries and a charging infrastructure are available on-site.
Which device has the better display for reading WMS screens and dense data?
The Datalogic Memor 30 has the substantially better display by the provided specifications: 6.0 inches at 2160 × 1080 Full HD+ resolution with Corning Gorilla Glass 5, versus the Honeywell CK67's 4.3-inch panel at 800 × 480 with Gorilla Glass 7. The Memor 30's higher pixel density makes it the better choice for workflows requiring detailed on-screen data, image review, or complex application navigation.
Which unit is more rugged for high-bay or dock environments with a real drop risk?
Both units are rated IP65/IP68. For drop survivability, the CK67-X0N-5EC1C2G is rated to 2.4 m (approximately 7.9 ft), while the Memor 30 specifies 6 ft (approximately 1.83 m) to concrete per the provided data. The CK67's higher drop rating and lower operating temperature floor (-20°C) make it the better-specified option for demanding dock, cold-chain, or high-bay environments.
More Mobile Computer Comparisons
- Datalogic 944850001 vs Honeywell CK67-X1N-58A1B1G
- Datalogic 944850001 vs Honeywell CK67-X1N-58A1A1G
- Datalogic 944850001 vs Honeywell CK67-X1N-58A1C1G
- Datalogic 944850001 vs Datalogic 944950001
- Datalogic 944850001 vs Datalogic 944900004
- Datalogic 944950001 vs Honeywell CK67-X0N-5EC1C2G
Mobile Computer Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.