Hanwha XNO-6010R vs i-PRO S1536LA: Specification Comparison
Both the Hanwha XNO-6010R and the i-PRO WV-S1536LA are 2MP outdoor bullet IP cameras designed for perimeter surveillance, making them direct cross-shop candidates for installers evaluating fixed-lens versus motorized-varifocal optics at the same resolution tier. The XNO-6010R offers a wide fixed field of view with dual edge-storage slots and a broad analytics suite, while the S1536LA brings a 3.1× motorized zoom lens, 70m IR reach, AI sound classification, and FIPS 140-2 Level 3 security certification. This comparison covers imaging, installation, and integration trade-offs based solely on published specifications.
In This Guide
How do the imaging specs compare?
Both cameras use an approximately 1/2.8-inch 2MP CMOS sensor and capture 1080p at up to 60fps in H.265. The XNO-6010R carries a fixed 2.4mm lens with a 139° horizontal field of view, suited for wide-area coverage at close-to-medium range, and delivers IR illumination to 20m (65.6ft). Its minimum illumination in color is 0.055 lux, reaching 0 lux in IR mode. WDR is rated at 150dB via its SSDR/WDR engine. The S1536LA, by contrast, features a 2.9–9mm motorized varifocal lens with 3.1× optical zoom (extendable to 9.3× via extra zoom at 640×360), providing a 37–117° horizontal field of view in 16:9 mode—allowing remote reframing without physical lens changes. IR reach extends to 70m (229.7ft) at 30IRE / 50m at 50IRE, and color minimum illumination is 0.007 lux; B&W minimum illumination is 0.005 lux (F1.3, 1/30s). Dynamic range peaks at 144dB (Super Dynamic Level 31).
In summary: the XNO-6010R provides wider coverage (139° vs up to 117°) and a higher WDR rating (150dB vs 144dB), while the S1536LA provides more than 3× the IR range (70m vs 20m), over 7× better color low-light sensitivity (0.007 lux vs 0.055 lux), and remote optical zoom flexibility. DORI performance data (Detect/Observe/Recognize/Identify at wide and tele) is provided only for the S1536LA; the XNO-6010R does not publish DORI distances.
What about installation and environment?
Both cameras are IP66-rated for dust and water resistance, IK10-rated for impact resistance, and NEMA 4X-listed. The XNO-6010R is rated for operation from -30°C to +55°C and storage from -50°C to +60°C, weighing 1,220g (2.69 lb) in an aluminum housing measuring Ø70×296mm. It supports PoE IEEE 802.3af (Class 3, max 9.7W) or 12VDC (max 8.8W). The S1536LA operates from -40°C to +60°C (power-on range: -30°C to +60°C) and features an active anti-condensation system (Temish element, heater, and moisture absorption gel) not present in the XNO-6010R spec. It weighs approximately 2.4kg (5.3 lb) in an aluminum/resin/polycarbonate housing measuring Ø133×133×383mm, and draws up to 9.1W over PoE 802.3af (PoE Class listed as 0 in product attributes). The S1536LA also specifies wind resistance up to 40m/s (~89 mph). Both provide a CVBS/VBS composite monitor output for installation alignment.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S, G, and T (the S1536LA adds Profile M). Both stream H.265, H.264, and MJPEG with CBR/VBR bitrate control and unicast/multicast delivery. The XNO-6010R supports up to 20 simultaneous unicast users and up to 10 stream profiles; the S1536LA supports up to 14 simultaneous users. Protocol support is broadly similar; the S1536LA adds SFTP and MQTT, which the XNO-6010R does not list. On security, the S1536LA carries FIPS 140-2 Level 3 certification and brute-force protection; the XNO-6010R lists 802.1X (EAP-TLS, EAP-LEAP), HTTPS/SSL, and IP filtering but does not publish FIPS certification.
For edge analytics, the XNO-6010R lists a broader named analytics set—directional detection, digital auto tracking, appear/disappear, enter/exit, loitering, virtual line, defocus, fog detection—plus business intelligence functions (people counting, queue management, heatmap). The S1536LA specifies 8 AI detection modes including AI sound classification (gunshot, yell, vehicle horn, glass break) and scene change detection; the XNO-6010R lists audio detection but does not specify AI sound classification categories. Both provide audio input and output; the S1536LA uses 3.5mm stereo mini jacks, the XNO-6010R uses a 2.5VDC selectable mic/line input and line out. The XNO-6010R provides dual microSD slots supporting up to 512GB; the S1536LA provides a single microSD slot up to 512GB. Alarm I/O: XNO-6010R has 1 input / 1 output; S1536LA has 3 alarm inputs, 1 alarm output, and 1 AUX output. The XNO-6010R warranty is 3 years; the S1536LA warranty is 5 years.
Which should you choose: the XNO-6010R or the S1536LA?
Our take: The XNO-6010R is the stronger choice when wide fixed-angle coverage (139° H), dual edge-storage slots, and a richer named analytics library—including people counting, queue management, and heatmap—are the primary requirements at a lower power draw (8.8W vs 9.1W). The S1536LA is the stronger choice when long-range IR reach (70m vs 20m), remote optical zoom (3.1× motorized varifocal), superior low-light sensitivity (0.007 lux color vs 0.055 lux), a wider operating temperature floor (-40°C vs -30°C cold-start), FIPS 140-2 Level 3 security compliance, AI sound classification (gunshot/yell/glass break), and a 5-year warranty (vs 3-year) are decision factors. For government, critical infrastructure, or cyber-hardened deployments requiring certified encryption and extended IR range, the S1536LA's spec sheet is materially stronger; for broad-area analytics and dual-slot redundancy on tighter budgets, the XNO-6010R's fixed-lens simplicity and analytics breadth hold clear value.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha XNO-6010R | i-PRO S1536LA |
|---|---|---|
| Resolution | 2MP (1920×1080) | 2MP (1920×1080) |
| Image Sensor | 1/2.8" 2MP CMOS | Approx. 1/2.8" type CMOS |
| Lens / Focal Length | 2.4mm fixed | 2.9–9mm motorized varifocal (3.1× optical zoom) |
| Horizontal Field of View | 139° | 37–117° (16:9) |
| Min. Illumination (Color) | 0.055 lux | 0.007 lux (30IRE) |
| Min. Illumination (B&W / IR) | 0 lux (IR mode) | 0.005 lux (50IRE, F1.3, 1/30s) |
| IR Range | 20m (65.6ft) | 70m (229.7ft) at 30IRE / 50m at 50IRE |
| Wide Dynamic Range | 150dB | Max. 144dB (Super Dynamic Level 31) |
| Max Frame Rate | 60fps | 60fps |
| Video Compression | H.265 / H.264 / MJPEG | H.265 / H.264 / MJPEG |
| IP Rating | IP66 / IP67 / NEMA 4X | IP66 / NEMA 4X |
| Impact Rating | IK10 | IK10 |
| Operating Temperature | -30°C to +55°C | -40°C to +60°C (power-on: -30°C to +60°C) |
| Power Input / PoE | PoE IEEE 802.3af Class 3 / 12VDC; max 9.7W (PoE) | PoE IEEE 802.3af; 9.1W / DC12V 710mA |
| Edge Storage | Dual microSD/SDHC/SDXC up to 512GB (2 slots) | Single microSD up to 512GB (1 slot) |
| Alarm I/O | 1 input / 1 output | 3 alarm inputs / 1 alarm output / 1 AUX output |
| ONVIF Profiles | S / G / T | S / G / T / M |
| Security Certification | 802.1X EAP-TLS/EAP-LEAP; HTTPS; signed firmware (no FIPS listed) | FIPS 140-2 Level 3; 802.1X; HTTPS; brute-force protection |
| Dimensions | Ø70×296mm (Ø2.76"×11.65") | Ø133×133×383mm (Ø5-1/4"×5-1/4"×15-3/32") |
| Weight | 1,220g (2.69 lb) | Approx. 2,400g (5.3 lb) |
| Warranty | 3 years | 5 years |
Frequently Asked Questions
Which should you choose: the XNO-6010R or the S1536LA?
The XNO-6010R is the stronger choice when wide fixed-angle coverage (139° H), dual edge-storage slots, and a richer named analytics library—including people counting, queue management, and heatmap—are the primary requirements at a lower power draw (8.8W vs 9.1W). The S1536LA is the stronger choice when long-range IR reach (70m vs 20m), remote optical zoom (3.1× motorized varifocal), superior low-light sensitivity (0.007 lux color vs 0.055 lux), a wider operating temperature floor (-40°C vs -30°C cold-start), FIPS 140-2 Level 3 security compliance, AI sound classification (gunshot/yell/glass break), and a 5-year warranty (vs 3-year) are decision factors. For government, critical infrastructure, or cyber-hardened deployments requiring certified encryption and extended IR range, the S1536LA's spec sheet is materially stronger; for broad-area analytics and dual-slot redundancy on tighter budgets, the XNO-6010R's fixed-lens simplicity and analytics breadth hold clear value.
Is the XNO-6010R or S1536LA better for low-light and nighttime surveillance?
The S1536LA is better on both published low-light metrics: its color minimum illumination is 0.007 lux versus the XNO-6010R's 0.055 lux, and its IR illumination reaches 70m (30IRE) compared to the XNO-6010R's 20m. If long-range night visibility is critical, the S1536LA has a material advantage per its specifications.
Which camera is easier to aim and reframe after installation?
The S1536LA includes a 2.9–9mm motorized varifocal lens with 3.1× optical zoom that can be adjusted remotely without physically handling the camera. The XNO-6010R uses a fixed 2.4mm lens; field of view is set at installation and cannot be changed remotely. For sites where reframing flexibility is needed post-install, the S1536LA's motorized zoom is a practical advantage.
Does either camera meet cybersecurity compliance requirements for government or critical infrastructure?
The S1536LA specifies FIPS 140-2 Level 3 certification, device certificates, IEEE 802.1X, brute-force protection, SFTP, and MQTT. The XNO-6010R lists HTTPS/SSL, 802.1X (EAP-TLS, EAP-LEAP), IP filtering, and signed/encrypted firmware but does not publish a FIPS 140-2 certification. For deployments where FIPS 140-2 Level 3 compliance is a hard requirement, only the S1536LA's spec sheet addresses it directly.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.