Hanwha QNF-8010 vs Hanwha XNF-8010R: Specification Comparison
The Hanwha QNF-8010 and XNF-8010R are both 6MP fisheye IP cameras sharing the same 1/1.8" CMOS sensor and 2048×2048 resolution, making them direct cross-shop candidates for indoor panoramic surveillance deployments. The comparison centers on where they diverge: the QNF-8010 is a compact, lightweight indoor-only unit without IR illumination or audio, while the XNF-8010R adds active IR, built-in audio I/O, dual SD card slots, alarm I/O, and a ruggedized aluminum housing—at roughly double the weight and a higher power draw.
In This Guide
How do the imaging specs compare?
Both cameras use a 1/1.8" 6MP CMOS sensor producing 2048×2048 at 30fps and share 120dB WDR via SSDR and SSNR V noise reduction. The key low-light divergence is significant: the QNF-8010 specifies a minimum illumination of 0.2 Lux color (electrical day/night, no IR cut filter), while the XNF-8010R reaches 0.1 Lux color and 0 Lux in IR mode, backed by a 15m (49.21ft) IR illuminator and a true mechanical ICR. For zero-light or near-dark environments the XNF-8010R has a clear advantage; the QNF-8010 has no active IR and is limited to its electrical day/night transition.
Lens characteristics also differ. The QNF-8010 uses a 1.14mm F2.5 fixed focal lens with a 187° H/V/D field of view. The XNF-8010R uses a 1.6mm F1.6 lens with a 192° H/V/D field of view. The wider aperture (F1.6 vs F2.5) on the XNF-8010R further supports its low-light performance. The QNF-8010 supports network focus control is not specified; the XNF-8010R explicitly lists simple remote focus control via network. Defog is listed only on the XNF-8010R.
What about installation and environment?
The QNF-8010 carries an IP42 ingress rating—protected against solid objects >1mm and water dripping vertically—making it strictly an indoor-only ceiling mount. Its plastic housing measures Ø99×49mm and weighs 320g (0.71 lb). Power is PoE IEEE 802.3af Class 3 only, with a maximum draw of 6.4W (typical 4.6W). The XNF-8010R carries an IP66 rating (per the product card fields) in an aluminum housing, measuring Ø146×54.8mm and weighing 730g (1.61 lb). It accepts both PoE IEEE 802.3af Class 3 (max 12W) and 12VDC (max 11W), giving installers a backup power path. The XNF-8010R also lists certifications for EN55011, EN50581, EN50121-3-2, EN61000-4 series, and EN50155, indicating suitability for environments with higher EMC demands such as transit applications.
Both cameras share the same operating temperature range of -10°C to +55°C and storage range of -50°C to +60°C. Neither specifies an IK impact rating in the provided specifications. The XNF-8010R's larger footprint and aluminum construction support ceiling surface or pendant mounting in higher-traffic or semi-exposed areas where the QNF-8010's plastic IP42 body would not be appropriate.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile S/G/T, SUNAPI (HTTP API), and the Wisenet open platform, so VMS compatibility is equivalent. Video compression (H.265/H.264 Main/Baseline/High, MJPEG), WiseStream II smart codec, CBR/VBR bitrate control, and the same security protocol stack (HTTPS, 802.1X EAP-TLS/EAP-LEAP, IP filtering, digest auth) are common to both. The QNF-8010 supports up to 6 unicast users and 3 simultaneous streaming profiles. The XNF-8010R supports up to 10 simultaneous streaming profiles and adds SRTP (unicast) and PPPoE to its protocol list—meaningfully broader for multi-client or cellular backhaul deployments.
Analytics diverge substantially. The QNF-8010 offers people counting, heatmap, motion detection, defocus detection, and tampering. The XNF-8010R extends this with directional detection, appear/disappear, enter/exit, loitering, virtual line, audio detection, and sound classification, plus queue management in its business intelligence tier. The XNF-8010R adds full audio I/O (selectable mic/line in with 2.5VDC supply, line out at 1Vrms) and G.711/G.726/AAC-LC compression; the QNF-8010 specifies no audio capability. Alarm I/O (1 input / 1 output) is present only on the XNF-8010R. Edge storage is a single microSD/SDHC/SDXC slot up to 256GB on the QNF-8010 versus dual slots totaling up to 512GB on the XNF-8010R.
Which should you choose: the QNF-8010 or the XNF-8010R?
Our take: The XNF-8010R is the stronger choice when the deployment requires active low-light or zero-light coverage, audio capture, or richer edge analytics. Three concrete spec deltas drive this: the XNF-8010R's 15m IR illuminator and 0 Lux IR minimum illumination versus the QNF-8010's 0.2 Lux color floor with no IR; dual microSD slots totaling 512GB versus a single 256GB slot; and alarm I/O plus a nine-analytics suite (including loitering, enter/exit, audio detection) versus the QNF-8010's five-analytic set with no audio or alarm I/O. The QNF-8010 is the appropriate selection when the site is well-lit, budget or ceiling aesthetics favor a smaller 99mm plastic dome at lower PoE wattage (6.4W max vs 12W), and IP42 ingress protection is sufficient—typical of climate-controlled retail or office interiors. The XNF-8010R's IP66 rating, aluminum body, 12VDC alternate power input, and EN50155 certification make it the better fit for transit, semi-exposed, or high-EMC environments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha QNF-8010 | Hanwha XNF-8010R |
|---|---|---|
| Resolution | 6MP (2048×2048) | 6MP (2048×2048) |
| Image Sensor | 1/1.8" CMOS | 1/1.8" CMOS |
| Lens / Focal Length | 1.14mm fixed | 1.6mm fixed |
| Max Aperture | F2.5 | F1.6 |
| Field of View (H/V/D) | 187° / 187° / 187° | 192° / 192° / 192° |
| Min. Illumination | 0.2 Lux color (no IR) | 0.1 Lux color / 0 Lux IR |
| IR Illuminator / Range | — | Built-in IR, 15m (49.21ft) |
| Day/Night Mechanism | Electrical (no ICR) | Auto ICR |
| Wide Dynamic Range | 120dB | 120dB |
| Max Frame Rate | 30fps @ 2048×2048 | 30fps @ 2048×2048 |
| Video Compression | H.265, H.264, MJPEG | H.265, H.264, MJPEG |
| Simultaneous Streams | Up to 3 profiles | Up to 10 profiles |
| IP Rating | IP42 | IP66 |
| Housing Material | Plastic | Aluminum |
| Power Input | PoE 802.3af Class 3 only | PoE 802.3af Class 3 or 12VDC |
| Max Power Draw | 6.4W (PoE) | 12W (PoE) / 11W (12VDC) |
| Edge Storage | 1× microSD up to 256GB | 2× microSD up to 512GB total |
| Audio I/O | — | 1× audio in (mic/line/built-in), 1× line out |
| Alarm I/O | — | 1 input / 1 output |
| Analytics | People counting, heatmap, motion, defocus, tampering | Directional, motion, appear/disappear, enter/exit, loitering, tampering, virtual line, audio detection, sound classification; people counting, queue management, heatmap |
| Privacy Masking Zones | 6 rectangle zones | 32 quadrangle zones |
| Operating Temperature | -10°C to +55°C | -10°C to +55°C |
| Certifications | IP42 | EN55011, EN50581, EN50121-3-2, EN61000-4 series, EN50155 |
| Dimensions | Ø99×49mm (Ø3.9×1.93") | Ø146×54.8mm (Ø5.75×2.16") |
| Weight | 320g (0.71 lb) | 730g (1.61 lb) |
| Warranty | 3 years | 3 years |
Frequently Asked Questions
Which should you choose: the QNF-8010 or the XNF-8010R?
The XNF-8010R is the stronger choice when the deployment requires active low-light or zero-light coverage, audio capture, or richer edge analytics. Three concrete spec deltas drive this: the XNF-8010R's 15m IR illuminator and 0 Lux IR minimum illumination versus the QNF-8010's 0.2 Lux color floor with no IR; dual microSD slots totaling 512GB versus a single 256GB slot; and alarm I/O plus a nine-analytics suite (including loitering, enter/exit, audio detection) versus the QNF-8010's five-analytic set with no audio or alarm I/O. The QNF-8010 is the appropriate selection when the site is well-lit, budget or ceiling aesthetics favor a smaller 99mm plastic dome at lower PoE wattage (6.4W max vs 12W), and IP42 ingress protection is sufficient—typical of climate-controlled retail or office interiors. The XNF-8010R's IP66 rating, aluminum body, 12VDC alternate power input, and EN50155 certification make it the better fit for transit, semi-exposed, or high-EMC environments.
Is the QNF-8010 or XNF-8010R better for low light?
The XNF-8010R is significantly better for low light. It includes a 15m IR illuminator and reaches 0 Lux in IR mode, while the QNF-8010 specifies 0.2 Lux color minimum illumination with no IR illuminator and only an electrical day/night transition. If the area loses ambient light entirely, the QNF-8010 will not produce a usable image.
Can either camera record audio, and does that affect my VMS setup?
Only the XNF-8010R supports audio. It provides a selectable mic/line input with 2.5VDC supply and a line output at 1Vrms, with G.711, G.726, and AAC-LC compression. The QNF-8010 has no audio input or output specified. If your VMS requires audio channels or you need on-camera sound classification analytics, the XNF-8010R is the only option of these two.
Which camera should I choose for a transit or semi-exposed installation?
The XNF-8010R is the appropriate choice. It carries an IP66 rating versus the QNF-8010's IP42, is housed in aluminum rather than plastic, accepts both PoE and 12VDC power, and lists certifications including EN50155 (railway rolling stock) and EN50121-3-2. The QNF-8010 is rated only for protected indoor environments and its IP42 rating does not cover water jets or sustained moisture exposure.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.