Hanwha C8012 vs i-PRO X22500-V3L: Specification Comparison
Both the Hanwha QNV-C8012 and i-PRO WV-X22500-V3L are 5MP wired dome cameras aimed at the commercial surveillance market, making them genuine cross-shop candidates in the same resolution class. The C8012 is an outdoor-rated fixed-lens AI dome, while the X22500-V3L is an indoor IK10 dome with a motorized varifocal lens. Buyers evaluating these two will weigh outdoor durability and wide fixed coverage against indoor flexibility with optical zoom, extended IR, and more granular audio analytics.
In This Guide
How do the imaging specs compare?
Both cameras use an approximately 1/2.8-inch CMOS sensor at 5MP and deliver 30fps at full resolution. The C8012 resolves 2592×1944 (4:3 aspect), while the X22500-V3L outputs 3072×1728 (16:9 aspect), giving the i-PRO unit a wider native widescreen frame. Low-light sensitivity differs meaningfully: the C8012 specifies 0.05 Lux color / 0.005 Lux B/W, while the X22500-V3L specifies 0.02 Lux B/W with IR active. The i-PRO's dynamic range tops out at 132dB (Super Dynamic on, level 31), versus 120dB WDR on the C8012—a 12dB advantage for the X22500-V3L in high-contrast scenes.
Lens characteristics diverge sharply. The C8012 uses a fixed 2.4mm F2.0 lens delivering a 123° horizontal field of view and a minimum object distance of 0.5m—optimized for wide-area coverage in compact spaces. The X22500-V3L carries a 3.1x motorized varifocal lens spanning 2.9–9mm (F1.3 wide to F2.5 tele) with a horizontal FOV range of 105° to 33°, allowing post-install focus adjustment. IR range is notably asymmetric: the X22500-V3L specifies 70m IR illumination; the C8012 provides no IR throw distance in the supplied specs (its built-in IR is confirmed but distance is not specified). DORI detect ranges reflect this: X22500-V3L reaches 47.1m (wide) to 207.4m (tele) at 25ppm, versus 28.1m for the C8012.
What about installation and environment?
The C8012 is outdoor-rated IP66 and IK10, NEMA 4X certified, and operates from -40°C to +55°C—suitable for harsh outdoor deployments including extreme cold. The X22500-V3L carries IK10 impact resistance but no IP ingress rating is listed in the provided specs, and its operating range is -10°C to +50°C (with a 0°C power-on minimum), positioning it as an indoor unit only. Buyers should not install the X22500-V3L in exposed outdoor locations based on the available specification data.
Power requirements differ by PoE class: the C8012 draws a maximum of 7W and operates on PoE IEEE 802.3af Class 3, making it compatible with standard PoE switches. The X22500-V3L requires PoE+ (802.3at) at up to 14W (Class 4), meaning PoE+ capable switches or injectors are mandatory. The C8012 mounts via SBD-110GP1 gangbox adapter and optional SBP-120HMW hanging mount. The X22500-V3L lists pan ±180°, tilt -30° to +85°, yaw ±100° adjustment angles. The C8012 pan/tilt/rotate range is 0°–350° / -35°–70° / 0°–355°. The C8012 also includes a Micro USB Type B video-out port (1280×720) for installation alignment, which is not listed for the X22500-V3L.
Which fits your VMS and analytics better?
Both cameras support ONVIF Profile G/S/T/M and H.265/H.264/MJPEG compression with CBR/VBR bitrate control, ensuring broad VMS compatibility. The C8012 adds Hanwha's SUNAPI (HTTP API) and WiseStream III AI-assisted codec; the X22500-V3L runs on an Ambarella CV52 SoC. Edge analytics differ substantially: the C8012 offers people/vehicle counting, queue management, heatmap, virtual line/area crossing with direction, and AI-classified vehicle types (car/bus/truck/motorcycle/bicycle). The X22500-V3L provides AI motion, face, people, and vehicle detection plus AI sound classification (gunshot, yell, vehicle horn, glass break) and scene change detection—capabilities the C8012 does not list.
Audio hardware is present only on the X22500-V3L, which includes a 3.5mm stereo audio input and output plus external alarm I/O (2 IN, 1 OUT, 1 AUX). The C8012 lists no audio input or output and no physical alarm I/O terminals. Edge storage capacity favors the X22500-V3L: microSDXC up to 512GB versus microSD/SDHC/SDXC up to 256GB on the C8012. Security posture differs: the X22500-V3L lists FIPS 140-2 Level 3 compliance; the C8012 specifies secure boot, signed firmware, firmware encryption, 802.1X authentication, and SD card partition encryption, but does not cite FIPS 140-2. Simultaneous streaming supports up to 5 profiles (C8012) vs up to 14 concurrent users (X22500-V3L).
Which should you choose: the C8012 or the X22500-V3L?
Our take: The C8012 is the stronger choice when deploying outdoors or in harsh environments where IP66/NEMA 4X protection, a -40°C cold-start rating, and standard PoE Class 3 infrastructure matter. Its 123° fixed wide-angle lens and embedded heatmap/people-counting analytics suit retail floor coverage and perimeter monitoring on a tight PoE budget. Conversely, the X22500-V3L is the better fit for indoor environments where optical zoom flexibility (3.1x motorized varifocal, 2.9–9mm), superior 132dB dynamic range (vs 120dB), 70m specified IR throw, and AI sound classification are priorities. The X22500-V3L also adds audio I/O and physical alarm terminals absent on the C8012, and its 512GB edge storage ceiling doubles the C8012's 256GB. Choose the C8012 for outdoor fixed wide-area AI analytics on standard PoE; choose the X22500-V3L for indoor zoom-adjustable installations requiring audio detection and higher dynamic range, provided PoE+ infrastructure is available.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Hanwha C8012 | i-PRO X22500-V3L |
|---|---|---|
| Resolution | 2592×1944 (5MP, 4:3) | 3072×1728 (5MP, 16:9) |
| Image Sensor | 1/2.8" CMOS | Approx. 1/2.8" CMOS |
| Lens / Focal Length | Fixed 2.4mm, F2.0 | Motorized varifocal 2.9–9mm, F1.3–F2.5 |
| Optical Zoom | — | 3.1x (motorized) |
| Horizontal FOV | 123° | 105° (wide) – 33° (tele) |
| Min. Illumination | 0.05 Lux color / 0.005 Lux B/W | 0.02 Lux B/W (with IR) |
| IR Range | Not specified | 70m (230 ft) |
| Wide Dynamic Range | 120dB | 132dB (Super Dynamic On, Level 31) |
| Max Frame Rate | 30fps @ 5MP | 30fps @ 5MP |
| Video Compression | H.265, H.264, MJPEG | H.265, H.264, MJPEG |
| IP Rating | IP66 / NEMA 4X | Not specified in provided specs |
| IK / Impact Rating | IK10 | IK10 |
| Operating Temperature | -40°C to +55°C | -10°C to +50°C (0°C power-on min) |
| Power Input / PoE Class | PoE 802.3af, Class 3 (max 7W) | PoE+ 802.3at, Class 4 (max 14W) |
| Edge Storage | microSD/SDHC/SDXC up to 256GB | microSDXC up to 512GB |
| Audio I/O | — | 3.5mm stereo in + out |
| Alarm I/O | — | 2 IN, 1 OUT, 1 AUX |
| ONVIF Profile | G / S / T / M | G / S / T / M |
| AI Analytics | People/vehicle counting, heatmap, queue mgmt, virtual line/area, vehicle type classification | Face, people, vehicle, motion detection; AI sound classification (gunshot, yell, horn, glass break) |
| Dimensions | ø110 × 77mm (ø4.33 × 3.03") | ø129.5 × 102.5mm (H) (ø5-3/32 × 4-1/32" H) |
| Weight | 522g (1.15 lb) | Approx. 820g (1.9 lb) |
| Warranty | 3-year | 5-year |
Frequently Asked Questions
Which should you choose: the C8012 or the X22500-V3L?
The C8012 is the stronger choice when deploying outdoors or in harsh environments where IP66/NEMA 4X protection, a -40°C cold-start rating, and standard PoE Class 3 infrastructure matter. Its 123° fixed wide-angle lens and embedded heatmap/people-counting analytics suit retail floor coverage and perimeter monitoring on a tight PoE budget. Conversely, the X22500-V3L is the better fit for indoor environments where optical zoom flexibility (3.1x motorized varifocal, 2.9–9mm), superior 132dB dynamic range (vs 120dB), 70m specified IR throw, and AI sound classification are priorities. The X22500-V3L also adds audio I/O and physical alarm terminals absent on the C8012, and its 512GB edge storage ceiling doubles the C8012's 256GB. Choose the C8012 for outdoor fixed wide-area AI analytics on standard PoE; choose the X22500-V3L for indoor zoom-adjustable installations requiring audio detection and higher dynamic range, provided PoE+ infrastructure is available.
Is the C8012 or X22500-V3L better for low-light performance?
Based on supplied specs, the X22500-V3L lists a lower minimum illumination at 0.02 Lux B/W with IR versus 0.005 Lux B/W for the C8012—so the C8012 specifies a lower illumination floor numerically. However, the X22500-V3L specifies an IR throw of 70m, while the C8012's IR throw distance is not provided in the available specs. The X22500-V3L also has a wider F1.3 maximum aperture at its wide-angle setting versus F2.0 fixed on the C8012, which aids passive light collection.
Can I use the C8012 outdoors and the X22500-V3L indoors on the same PoE switch?
The C8012 runs on standard PoE (802.3af, Class 3, max 7W) so it works with any PoE-capable switch port. The X22500-V3L requires PoE+ (802.3at, Class 4, up to 14W), so you need PoE+ capable ports for that camera. A PoE+ switch supports both standards, but a standard PoE-only switch cannot power the X22500-V3L. Also note the X22500-V3L has no IP ingress rating listed in its specifications and is intended for indoor installation only.
Which camera has more advanced on-board analytics?
They cover different analytics domains. The C8012 includes people/vehicle counting, queue management, heatmap, virtual line/area crossing with direction, and AI-classified vehicle types (car, bus, truck, motorcycle, bicycle). The X22500-V3L adds AI sound classification (gunshot, yell, vehicle horn, glass break), face detection, scene change detection, and audio detection—features not listed for the C8012. The C8012 also includes business intelligence outputs (heatmap, queue management) not specified for the X22500-V3L. The right choice depends on whether audio-based or visual-counting analytics are the priority.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.