Geovision TBLP880-0010 vs Pelco SRXF3-8360-I: Specification Comparison
This comparison covers two 8-megapixel fixed panoramic IP cameras aimed at wide-area surveillance: the Geovision 84-TBLP880-0010 panoramic bullet and the Pelco SRXF3-8360-I Sarix Fisheye 3. Both target installers who need a single-camera, 180-to-360-degree view in lieu of multiple conventional cameras. They differ meaningfully in form factor, environment rating, power class, and feature depth, making a direct spec-by-spec review useful for integrators choosing between a cost-focused outdoor-capable panoramic bullet and an analytics-rich indoor fisheye.
In This Guide
How do the imaging specs compare?
The Geovision TBLP880-0010 uses a 1/2.7-inch sensor with a 1.68 mm fixed lens at F/2.0, delivering an 8 MP panoramic image via a fisheye-style bullet form factor. It includes built-in IR illumination rated to approximately 20–30 m and Day/Night operation, with WDR enabled. Minimum illumination lux is not specified in the available data, which limits direct low-light benchmarking.
The Pelco SRXF3-8360-I uses a 2.7 mm lens (a conflicting 1.4 mm value appears in one spec field; 2.7 mm is treated as primary) at F/2.5, with a maximum frame rate of 12.5 fps at full resolution and a documented minimum illumination of 0.10 lux. WDR is rated up to 83 dB. IR at 850 nm is listed, though the unit carries an Indoor environment rating, so IR utility in sealed-dark indoor voids should be verified with Pelco. The Pelco's 83 dB WDR figure and 0.10 lux floor are concrete, comparable benchmarks the Geovision listing does not supply.
What about installation and environment?
The Geovision is a panoramic bullet housing with mount compatibility across wall, pole, corner, rack/wall, and power-box configurations, giving installers flexibility for outdoor perimeter and corner coverage. No IP or IK rating is published for the TBLP880-0010, and no operating temperature range is specified, which means outdoor suitability cannot be confirmed from available documentation alone. It draws roughly 12–13 W and is powered by standard PoE 802.3af.
The Pelco SRXF3-8360-I is rated IP52 (dust-protected, drip-resistant) and IK10 (vandal-resistant to 20-joule impact), with a certified operating range of -10 °C to +60 °C (a conflicting upper limit of +70 °C appears in one field; +60 °C is used as the conservative value). Its Environment Rating is listed as Indoor, though one spec field also states Outdoor Ready — installers should confirm with Pelco before deploying outdoors. It requires PoE+ 802.3at (Class 3), so switch ports must support the higher power budget. The fisheye form factor suits flush ceiling or wall-surface mount for interior wide-area coverage.
Which fits your VMS and analytics better?
The Geovision supports ONVIF Profile S and includes AI deep-learning analytics onboard. No audio input or output is listed, and no on-board storage is specified. Its ONVIF Profile S support provides baseline VMS interoperability but excludes the metadata and event-streaming extensions added in Profile T.
The Pelco SRXF3-8360-I supports both ONVIF Profile S and Profile T, the latter enabling richer event and metadata streams to compatible VMS platforms. It ships with Pelco Smart Analytics covering 8 behavior classes. Microphone support is listed for audio capture. On-board storage via microSD is available, providing edge buffering or standalone recording. HTTPS encryption is confirmed. The 4 GB RAM and 4 GB Flash memory allocation indicates a more capable edge-compute platform relative to what the Geovision listing discloses.
Which should you choose: the TBLP880-0010 or the SRXF3-8360-I?
Our take: The TBLP880-0010 is the stronger choice when the installation requires outdoor-rated panoramic bullet coverage across pole, corner, or perimeter mounting points and standard 802.3af PoE infrastructure is already in place. The Pelco SRXF3-8360-I holds measurable advantages in three documented areas: it publishes a 0.10 lux minimum illumination floor versus no lux figure from Geovision; its WDR is rated at a specific 83 dB versus an unquantified WDR flag on the Geovision; and it carries IK10 impact resistance and IP52 ingress ratings versus no published IP or IK rating on the TBLP880-0010. Choose the Pelco for indoor analytics-intensive deployments where ONVIF Profile T metadata, microSD edge storage, and a 5-year warranty are required — and where PoE+ (802.3at) switch ports are available. Confirm with Pelco before any outdoor use given the conflicting Indoor/Outdoor-Ready designations.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision TBLP880-0010 | Pelco SRXF3-8360-I |
|---|---|---|
| Resolution | 8 MP | 8 MP (3264x2448 primary; 3840x2160 also stated — conflict noted) |
| Form Factor | Panoramic Bullet | Fisheye (ceiling/wall surface) |
| Lens | 1.68 mm fixed, F/2.0 | 2.7 mm fixed, F/2.5 (1.4 mm also listed — conflict noted) |
| Sensor Size | 1/2.7 inch | — |
| Frame Rate | — | 12.5 fps at full resolution |
| WDR | WDR (level not specified) | Up to 83 dB |
| Min Illumination | — | 0.10 lux |
| IR Illumination | IR, ~20–30 m range | IR, 850 nm (Indoor-rated unit — verify scope) |
| PoE Standard | 802.3af (~12–13 W) | 802.3at PoE+ Class 3 |
| IP Rating | — | IP52 |
| IK Rating | — | IK10 |
| Operating Temperature | — | -10 °C to +60 °C (conflict: +70 °C in one field) |
| ONVIF | Profile S | Profile S and Profile T |
| Edge Analytics | AI Deep-Learning | Pelco Smart Analytics, 8 behaviors |
| Audio | — | Microphone supported |
| On-Board Storage | — | microSD |
| Warranty | — | 5 years |
| Mount Options | Wall, Pole, Corner, Rack/Wall, Power Box | Surface mount, In-ceiling mount |
Frequently Asked Questions
Which should you choose: the TBLP880-0010 or the SRXF3-8360-I?
The TBLP880-0010 is the stronger choice when the installation requires outdoor-rated panoramic bullet coverage across pole, corner, or perimeter mounting points and standard 802.3af PoE infrastructure is already in place. The Pelco SRXF3-8360-I holds measurable advantages in three documented areas: it publishes a 0.10 lux minimum illumination floor versus no lux figure from Geovision; its WDR is rated at a specific 83 dB versus an unquantified WDR flag on the Geovision; and it carries IK10 impact resistance and IP52 ingress ratings versus no published IP or IK rating on the TBLP880-0010. Choose the Pelco for indoor analytics-intensive deployments where ONVIF Profile T metadata, microSD edge storage, and a 5-year warranty are required — and where PoE+ (802.3at) switch ports are available. Confirm with Pelco before any outdoor use given the conflicting Indoor/Outdoor-Ready designations.
Does the Geovision TBLP880-0010 have a published IP weather rating?
No IP rating is listed in the available specifications for the TBLP880-0010. Installers intending outdoor use should request the full datasheet from Geovision or the distributor before deployment.
Can the Pelco SRXF3-8360-I run on a standard 802.3af PoE switch?
No. The SRXF3-8360-I requires PoE+ 802.3at (Class 3). A standard 802.3af port, which is limited to 15.4 W delivered, may be insufficient. Verify that the switch port supports 802.3at before installation.
Which camera supports on-board edge recording?
The Pelco SRXF3-8360-I supports microSD card storage for on-board recording. The Geovision TBLP880-0010 does not list any on-board storage option in the available specifications.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.