Geovision PBL880W-0010 vs Pelco SRXF3-8180-ERS: Specification Comparison
Both the Geovision GV-PBL880W-0010 and Pelco SRXF3-8180-ERS (Sarix Fisheye 3) are 8MP fixed outdoor IP cameras designed to deliver wide-area panoramic coverage in a single unit, making them genuine cross-shop candidates for perimeter, entrance, and open-area surveillance deployments. This comparison examines how each model handles imaging performance, physical installation requirements, and VMS/analytics integration, drawing exclusively from the published specifications for each product.
In This Guide
How do the imaging specs compare?
Both cameras share an 8MP sensor and 180° field of view, but differ in lens and form-factor approach. The Geovision PBL880W-0010 uses a 1.68mm fisheye-class lens in a panoramic bullet housing, while the Pelco SRXF3-8180-ERS uses a 2.7mm f/2.5 lens (aperture also listed as F2.0 in supplemental specs) in a traditional fisheye dome form factor, producing a maximum native resolution of 3264×2448 pixels at up to 12.5 fps at full resolution. The Geovision spec does not publish a discrete pixel-array dimension or maximum frame rate in the provided data.
On low-light and dynamic range, both cameras employ 850nm IR illumination and WDR. The Geovision lists 'WDR Pro' and 'Super Low Lux' with a specific IR wavelength of 850nm, but does not publish a quantified WDR dB value or a numeric minimum illumination figure (lux). The Pelco lists WDR rated up to 83dB and integrated 850nm IR across the full 180° field, with Day/Night functionality confirmed. The Geovision does not confirm a Day/Night ICR mechanism in the provided specs; the Pelco explicitly states Day/Night: Yes. The Pelco also lists H.265 and H.264 compression in supplemental specs, matching the Geovision's H.265/H.264 support, though H.264 is the only compression listed in the Pelco's primary spec block.
What about installation and environment?
The Pelco SRXF3-8180-ERS carries a published IP66/NEMA 4X ingress rating and an IK10 impact rating, with an operating temperature range of -40°C to +60°C. It supports PoE+ (802.3at, Class 3) power input and is explicitly rated Outdoor Ready. Mounting options listed include wall, ceiling, pole, pendant, and corner. Physical dimensions are 6" × 6" × 2.81" and weight with wall mount is approximately 1.001 kg (2.21 lb). It also supports microSD on-board storage.
The Geovision PBL880W-0010 lists Wall and Pole as mount types and a Panoramic Bullet form factor, but does not publish an IP ingress rating, IK impact rating, operating temperature range, power input type/PoE class, physical dimensions, or weight in the provided specifications. Buyers requiring verified ingress protection or extreme-temperature rating should request the full Geovision datasheet at /content/product-datasheets/84-PBL880W-0010.pdf, as these specs are absent from the data provided.
Which fits your VMS and analytics better?
Both cameras support ONVIF. The Pelco SRXF3-8180-ERS specifies ONVIF Profile S and Profile T compliance, which enables standardized video streaming and metadata/analytics event transport respectively. The Geovision PBL880W-0010 lists ONVIF: Yes and VMS compatibility with 'ONVIF-compatible NVR/VMS platforms,' but does not specify which ONVIF profiles are supported. For environments requiring Profile T (analytics metadata streaming), the Pelco's explicit Profile T declaration is an advantage that the Geovision spec does not match or contradict.
On analytics, the Pelco lists Pelco Smart Analytics with 8 configurable behaviors as edge capabilities. The Geovision lists 'AI' analytics but does not enumerate specific behaviors or confirm edge processing in the provided data. The Pelco also lists microphone support (audio in) and on-board microSD storage — both absent from the Geovision's provided specs. The Pelco additionally supports HTTPS encryption. The Geovision's supplemental note lists 4GB RAM and 4GB Flash, which may indicate on-board compute for AI analytics, but this is not confirmed by primary specs. The Pelco's 5-year warranty is stated explicitly; no warranty term is published for the Geovision in the provided data.
Which should you choose: the PBL880W-0010 or the SRXF3-8180-ERS?
Our take: The Pelco SRXF3-8180-ERS is the stronger choice when verified environmental ratings, standards-confirmed ONVIF compliance, and a long warranty are decision factors. The Pelco publishes an IK10 impact rating and IP66/NEMA 4X ingress protection where the Geovision provides neither; its operating temperature range of -40°C to +60°C covers extreme cold and heat that the Geovision does not document. The Pelco specifies ONVIF Profile S and Profile T explicitly, while the Geovision lists only 'ONVIF: Yes' without profile detail — relevant for VMS platforms that require Profile T for analytics metadata. The Pelco also carries a stated 5-year warranty versus no published term for the Geovision. That said, the Geovision's 'WDR Pro' and 'Super Low Lux' claims may indicate stronger low-light performance, and its AI analytics designation could offer capabilities the Pelco's 8-behavior engine does not, but neither claim can be confirmed numerically from the provided specs. Specify the Pelco where environmental durability and standards documentation are non-negotiable; request the Geovision full datasheet before specifying it in harsh or compliance-sensitive environments.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Geovision PBL880W-0010 | Pelco SRXF3-8180-ERS |
|---|---|---|
| Resolution | 8MP | 8MP (3264 × 2448) |
| Lens / Focal Length | 1.68mm (180° panoramic) | 2.7mm f/2.5 (F2.0 aperture) |
| Field of View | 180° | 180° / 360° |
| Form Factor | Panoramic Bullet | Fisheye Dome |
| Max Frame Rate | — | 12.5 fps (full resolution) |
| IR Illumination | 850nm | 850nm (integrated across 180°) |
| Min Illumination | Super Low Lux (no lux figure published) | — |
| WDR | WDR Pro (no dB figure published) | WDR up to 83dB |
| Day/Night | — | Yes |
| Video Compression | H.265; H.264 | H.264 (H.265 in supplemental specs) |
| Power Input / PoE Class | — | PoE+ (802.3at), Class 3 |
| IP Rating | — | IP66 / NEMA 4X |
| IK / Impact Rating | — | IK10 |
| Operating Temperature | — | -40°C to +60°C |
| ONVIF Profiles | ONVIF: Yes (profiles not specified) | Profile S; Profile T |
| Edge Analytics | AI (behaviors not enumerated) | Pelco Smart Analytics, 8 configurable behaviors |
| Audio | — | Microphone supported |
| Edge Storage | — | microSD |
| HTTPS Encryption | — | Yes |
| Mount Types | Wall; Pole | Wall; Ceiling; Pole; Pendant; Corner |
| Dimensions | — | 6" × 6" × 2.81" |
| Weight | — | 1.001 kg (2.21 lb) with wall mount |
| Warranty | — | 5-year |
Frequently Asked Questions
Which should you choose: the PBL880W-0010 or the SRXF3-8180-ERS?
The Pelco SRXF3-8180-ERS is the stronger choice when verified environmental ratings, standards-confirmed ONVIF compliance, and a long warranty are decision factors. The Pelco publishes an IK10 impact rating and IP66/NEMA 4X ingress protection where the Geovision provides neither; its operating temperature range of -40°C to +60°C covers extreme cold and heat that the Geovision does not document. The Pelco specifies ONVIF Profile S and Profile T explicitly, while the Geovision lists only 'ONVIF: Yes' without profile detail — relevant for VMS platforms that require Profile T for analytics metadata. The Pelco also carries a stated 5-year warranty versus no published term for the Geovision. That said, the Geovision's 'WDR Pro' and 'Super Low Lux' claims may indicate stronger low-light performance, and its AI analytics designation could offer capabilities the Pelco's 8-behavior engine does not, but neither claim can be confirmed numerically from the provided specs. Specify the Pelco where environmental durability and standards documentation are non-negotiable; request the Geovision full datasheet before specifying it in harsh or compliance-sensitive environments.
Is the PBL880W-0010 or SRXF3-8180-ERS better for low light?
Both cameras use 850nm IR illumination and list WDR support, but the Pelco SRXF3-8180-ERS publishes a quantified WDR rating of up to 83dB and explicitly confirms Day/Night functionality. The Geovision lists 'WDR Pro' and 'Super Low Lux' without a dB value or confirmed ICR mechanism in the provided specs. On the available data, the Pelco's low-light credentials are more verifiable; the Geovision's claims may be equal or superior but cannot be confirmed numerically from the specs provided.
Which camera is more suitable for outdoor installations in harsh environments?
The Pelco SRXF3-8180-ERS is the more documented choice for harsh outdoor use: it carries an IP66/NEMA 4X ingress rating, an IK10 vandal/impact rating, and an operating temperature range of -40°C to +60°C — all published in its specs. The Geovision PBL880W-0010 does not publish an IP rating, IK rating, or operating temperature range in the provided specification data, so its suitability for specific environmental conditions cannot be confirmed without consulting the full datasheet.
Do both cameras work with third-party VMS platforms?
Yes, both cameras support ONVIF. The Pelco SRXF3-8180-ERS specifies ONVIF Profile S and Profile T, covering standard streaming and analytics metadata transport. The Geovision PBL880W-0010 lists ONVIF: Yes and compatibility with 'ONVIF-compatible NVR/VMS platforms,' but does not identify specific profiles in the provided specs. If your VMS requires a particular ONVIF profile — especially Profile T for edge analytics integration — the Pelco's explicit profile declarations provide greater assurance.
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.