Ubiquiti

Ubiquiti

SKU: UACC-OFC-M2-LULU-3M-50

Ubiquiti UACC-OFC-M2-LULU-3M-50 100G Fiber Patch Cable 3m 50-Pack

100G fiber patch cables, 3m, 50-pack for high-density deployments

• Supports 100G throughput, eliminating backbone bottlenecks on inter-switch links.
• 3m length fits standard rack-to-rack spacing, reducing excess cable tray clutter.
• 50-pack format ensures consistent performance across an entire deployment cluster.

Ubiquiti

SKU: UACC-OFC-M2-LULU-1M-50

Ubiquiti UACC-OFC-M2-LULU-1M-50 100G Fiber Patch Cable 1m 50-Pack

100G fiber patch cables, 1m length, 50-pack for high-density networks

• Runs 100G Ethernet over multimode fiber with no signal degradation at 1 m.
• Pre-cut 1 m length fits rack-to-rack runs without on-site trimming or waste.
• 50-unit bulk pack ensures uniform fiber specs across a full switch deployment.

Ubiquiti

SKU: UACC-LITE-AP-AM

Ubiquiti UACC-LITE-AP-AM Access Point Lite Arm Mount

Wall arm bracket for UniFi compact APs—extends coverage from fixed mount points

• Arm extension offsets APs from walls, eliminating backplane RF absorption at fixed mount points.
• Compatible with UniFi Lite compact AP form factors; bracket locks into the AP locking notch.
• Installs on wall, ceiling, or rack surfaces using standard fasteners—no proprietary tools needed.

Ubiquiti

SKU: UACC-G5-PTZ-SM

Ubiquiti UACC-G5-PTZ-SM Ceiling Surface Mount

Ceiling surface mount for UVC-G5-PTZ pan-tilt-zoom camera

• Purpose-built for UVC-G5-PTZ: eliminates adapter stacking and prevents alignment drift.
• Stainless steel fasteners resist corrosion in damp plenums and covered loading docks.
• Compact 90mm polycarbonate housing keeps ceiling profiles clean in commercial installs.

Ubiquiti

SKU: UACC-G5-PTZ-PM

Ubiquiti UACC-G5-PTZ-PM Pendant mount accessory for G5 PTZ.

Pendant mount for G5/G6 PTZ cameras with 3/4" threaded outlet

• Enables overhead PTZ deployment in atriums and high-bay warehouses without conduit through finished ceilings.
• 3/4" threaded outlet accepts standard conduit connections and UniFi mounting hardware for clean integration.
• Polycarbonate construction keeps the assembly lightweight at 0.1 lb; fits UVC-G5-PTZ and UVC-G6-PTZ only.

Ubiquiti

SKU: UACC-G5-PTZ-ICM

Ubiquiti UACC-G5-PTZ-ICM In-ceiling mount accessory for G5 PTZ.

Flush in-ceiling mount for UniFi G5 PTZ camera installations

• Polycarbonate enclosure enables flush drop-ceiling integration with minimal visual profile.
• Compact ⌀109.5 × 94.7 mm footprint preserves full PTZ pan-tilt range post-installation.
• Designed exclusively for UVC-G5-PTZ, ensuring verified mechanical and system compatibility.

Ubiquiti

SKU: UACC-G5-PTZ-CA-B

Ubiquiti UACC-G5-PTZ-CA-B 3/4" conduit adapter for wall-mounted

3/4" conduit adapter for wall-mounted G5/G6 PTZ cameras

• Fits 3/4" conduit runs to wall-mounted G5 and G6 PTZ cameras.
• Seals cable entry against water and debris at the camera mount point.
• Black housing blends with wall mounts; weighs 0.25 lb for easy handling.

Ubiquiti

SKU: UACC-G5-PTZ-CA

Ubiquiti UACC-G5-PTZ-CA 3/4" adapter for wall-mounted G5 PTZ

3/4" conduit adapter for wall-mounted G5 & G6 PTZ cameras

• Routes power and network cabling through standard 3/4" conduit for code-compliant installs.
• Polycarbonate enclosure is rated for outdoor deployment, maintaining weatherproof integrity.
• Compatible with UVC-G5-PTZ and UVC-G6-PTZ, integrating directly into UniFi Protect workflows.

Ubiquiti

SKU: UACC-G5-DOME-ULTRA-FM-B

Ubiquiti UACC-G5-DOME-ULTRA-FM-B Flush Mount Bracket

Recessed mounting bracket for Ubiquiti G5 Dome Ultra cameras

• Flush-mounts UVC-G5-Dome-Ultra into walls or ceilings for a recessed, low-profile finish.
• Supports wall, ceiling, and recessed installations in drywall and standard ceiling materials.
• Compact 100 × 88 mm footprint keeps camera hardware integrated into the mounting surface.

Ubiquiti

SKU: UACC-G5-DOME-ULTRA-FM-SB-B

Ubiquiti UACC-G5-DOME-ULTRA-FM-SB-B Recessed Dome Mount

Recessed dome mount for G5 Dome Ultra cameras with smoked enclosure

• Recessed ceiling/wall mount eliminates surface brackets for clean architectural integration.
• Smoked bubble enclosure conceals lens orientation without degrading optical performance.
• Engineered exclusively for UVC-G5-Dome-Ultra, ensuring precise mechanical fit and alignment.

Ubiquiti

SKU: UACC-G5-DOME-ULTRA-FM-SB-W

Ubiquiti UACC-G5-DOME-ULTRA-FM-SB-W Recessed Dome Mount

Flush recessed dome mount for Ubiquiti G5 Ultra with smoked bubble

• Recessed wall/ceiling install eliminates camera protrusion, reducing tampering risk.
• Included smoked bubble maintains optical clarity while minimizing visual footprint.
• Engineered exclusively for UVC-G5-Dome-Ultra; verify model match before ordering.

Ubiquiti

SKU: UACC-G4 DOORBELL PRO POE-GANG BOX-WHITE

Ubiquiti UACC-G4 DOORBELL PRO POE-GANG BOX-WHITE Mounting Plate

Single-gang electrical box mount for G4 Doorbell Pro PoE camera

• Mounts directly to a standard single-gang electrical box, eliminating extra frames.
• Supports flat and angled positioning to optimize camera FOV at varied doorway depths.
• Accommodates PoE (802.3af) pass-through so one Ethernet run handles power and data.

Ubiquiti

SKU: UACC-G4-DOME-ARM MOUNT

Ubiquiti UACC-G4-DOME-ARM MOUNT UACC G4 Dome Arm Mount

Wall, ceiling, and pole mount arm for Ubiquiti G4 Dome cameras

• Supports wall, ceiling, and pole mounting for flexible G4 Dome placement.
• Lightweight polycarbonate construction at 0.4 lb simplifies single-tech installs.
• Rated for interior and exterior use, covering facades, corridors, and perimeters.

Ubiquiti

SKU: UACC-FM-17CM

Ubiquiti UACC-FM-17CM magnetic wall mount for Cloud Gateways

Magnetic wall mount for Ubiquiti Cloud Gateways with 5.1mm low-profile

• 5.1 mm depth keeps UCG-Ultra, UCG-Max, and UXG-Max flush against any wall.
• Three mounting options—tapping screw, anchor, or magnet—suit drywall and metal.
• Polycarbonate and silicone rubber enclosure protects the mount in edge locations.

Ubiquiti

SKU: UACC-FLEX-CAM-PWM-WHITE-3

Ubiquiti UACC-FLEX-CAM-PWM-WHITE-3 Wall/Pole Mount

Weatherproof wall/pole mount for Ubiquiti G3 & G5 Flex cameras

• Mounts to walls or poles, adapting to existing infrastructure without extra hardware.
• Weatherproof-rated for outdoor deployment on eaves, perimeters, and exposed facades.
• Confirmed fit for G3 and G5 Flex cameras, eliminating compatibility guesswork at procurement.

Ubiquiti

SKU: UACC-FLEX-CAM-PWM-BLACK-3

Ubiquiti UACC-FLEX-CAM-PWM-BLACK-3 wall or pole mount for G3

Wall and pole mount for Ubiquiti G3 Flex cameras, outdoor-rated

• Mounts G3 Flex and G5 Flex cameras to walls or poles with no adapter plates.
• Outdoor-rated construction withstands direct rain and humidity in exterior deployments.
• Lightweight at 0.2 lb, adding negligible load to any mounting surface or pole structure.

Ubiquiti

SKU: UACC-DOME-WS-W

Ubiquiti UACC-DOME-WS-W Dome Camera Mounting Accessory

Weather-sealed white dome enclosure for wall and pole camera mounts

Ubiquiti

SKU: UACC-DAC-SFP28-3M

Ubiquiti UACC-DAC-SFP28-3M 25G Direct Attach Cable

25 Gbps SFP28 direct attach cable for UniFi rack-to-rack links

• Runs 25 Gbps full-duplex with no powered transceivers, reducing switch power load.
• SFP28 connectors on both ends plug directly into native 25G UniFi switch ports.
• 3-meter passive copper build covers standard rack-to-rack spans without extra hardware.

Ubiquiti

SKU: UACC-DAC-SFP28-1M

Ubiquiti UACC-DAC-SFP28-1M 25G SFP28 Direct Attach Cable

1M SFP28 DAC cable for 25 Gbps UniFi switch interconnects

• Delivers full 25 Gbps throughput over copper with no transceivers required.
• 1-meter fixed length suits same-rack and adjacent-rack SFP28 port connections.
• Plug-and-play SFP28 termination; no drivers or configuration needed on insertion.

Ubiquiti

SKU: UACC-DAC-SFP28-0.5M

Ubiquiti UACC-DAC-SFP28-0.5M 25 Gbps Direct Attach Cable

25 Gbps SFP28 direct attach cable for UniFi switches, 0.5m

• Passive 25 Gbps SFP28 twinax link adds zero power draw or thermal load to the rack.
• 0.5 m length targets top-of-rack and cabinet-level switch-to-server connections.
• No active components means no transceiver config, fewer failure points, lower BOM cost.