Lifesafety Power products
-
Add to Cart The item has been addedLifesafety Power
SKU: FPO250/250-3C85D8PE12M/P24-A
Lifesafety Power FPO250/250-3C85D8PE12M/P24-A 250W power supply
- Delivers 20A at 12VDC or 10A at 24VDC from a single 250W supply for multi-door deployments.
- 24 relay lock outputs (3A fused, per-door failsafe/failsecure/FAI) support auditable failure modes.
- 40 aux outputs assignable to Bus1 or Bus2 eliminate zone cross-talk in distributed control layouts.
$9,218.00 $6,054.99 Save $3,163.01The item has been added -
Lifesafety Power
SKU: FPO250/250-3C83D8PE8M3
Lifesafety Power FPO250/250-3C83D8PE8M3 250W power supply 20A/12
- Dual-voltage output (12VDC/20A or 24VDC/10A) eliminates separate supplies in mixed-voltage builds.
- Eight independently fused 3A relay outputs support per-door FAI, failsafe, or failsecure configuration.
- Eight 2.5A auxiliary class 2 outputs handle sensors and annunciators without consuming relay capacity.
$2,939.00 $1,930.99 Save $1,008.01The item has been added -
Lifesafety Power
SKU: FPO250/250-2C8P2D8PE8M2
Lifesafety Power FPO250/250-2C8P2D8PE8M2 Power supply board 250W
- Selectable 12VDC/20A or 24VDC/10A output matches existing lock hardware without rewiring.
- 32 Class 2 outputs (16 relay lock + 16 auxiliary) eliminate per-channel external breakers.
- Backplate mounts up to 8 Mercury/Lenel boards in one 30×36×4.5-inch enclosure.
$2,579.00 $1,693.99 Save $885.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-BOXED
Lifesafety Power FPO150-BOXED FPO150-BOXED
- 150W rated output handles mixed loads—cameras, readers, and door strikes in one zone.
- 12 VDC output suits standard access control readers and low-voltage security cameras.
- Factory-boxed enclosure eliminates on-site assembly, reducing installation labor at remote sites.
$371.00 $243.99 Save $127.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B150C8D8PE4M1
Lifesafety Power FPO150-B150C8D8PE4M1 150W Dual Voltage 120 VAC
- 150W at 120 VAC input supports mid-sized multi-door access control deployments.
- 8 relay lock outputs drive EM locks and REX devices across independent door circuits.
- 8 auxiliary outputs power sensors and ancillary devices without a separate supply.
$1,276.00 $838.99 Save $437.01The item has been added -
Lifesafety Power
SKU: FPO150-B1502M8NLCE4M1
Lifesafety Power FPO150-B1502M8NLCE4M1 150W power supply 12A/12V
- Delivers 12A at 12V across 8 independently fused 3A outputs for fault isolation.
- 150W continuous capacity supports 8–12 compact cameras or access control devices.
- Single-unit managed distribution eliminates stacking separate PSUs and surge strips.
$1,974.00 $1,296.99 Save $677.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B1502D8PM8NLCE6M/P8-A
Lifesafety Power FPO150-B1502D8PM8NLCE6M/P8-A 150W power supply
- Eight independently fused 3A outputs protect each branch without disrupting sibling circuits.
- Dual-bus architecture enables logical circuit isolation across device groups without extra wiring.
- Runs at 12VDC/12A or 24VDC/6A to match common camera and access control voltage requirements.
$3,160.00 $2,075.99 Save $1,084.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8PD8PE6M
Lifesafety Power FPO150-B100C8PD8PE6M 150W power supply 12A/12V
- Delivers 12A at 12VDC or 6A at 24VDC from a single 150W supply, reducing hardware count.
- 16 supervised outputs (8 relay lock + 8 DC aux) eliminate external relays across dual buses.
- Per-output failsafe, failsecure, or FAI logic simplifies mixed-policy door installations.
$1,608.00 $1,056.99 Save $551.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8E4X
Lifesafety Power FPO150-B100C8D8E4X 150W power supply 12A/12V
- Delivers 12A at 12VDC or 6A at 24VDC, configurable for mixed-voltage door deployments.
- 8 individually fused 3A relay outputs support per-output failsafe, failsecure, or FAI modes.
- 8 DC auxiliary outputs on dual selectable buses isolate load domains to contain fault impact.
$1,362.00 $894.99 Save $467.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8E2
Lifesafety Power FPO150-B100C8D8E2 150W Dvps 12/24 8 Lock Control
- Delivers 150W dual-voltage output (4A at 12VDC and 4A at 24VDC) from one cabinet source.
- Eight independently fused 3A auxiliary outputs isolate faults, protecting remaining circuits.
- E2 enclosure design supports co-mounting with NVR, PoE switch, or alarm panel hardware.
$809.00 $531.99 Save $277.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8E4-4DM2
Lifesafety Power FPO150-B100C8D8E4-4DM2 150W (12V & 24V) 8 lock/8
- Delivers simultaneous 12V and 24V outputs across eight auxiliary ports in one unit.
- 150W modular frame supports up to eight plug-in modules for field-customized deployments.
- Mounts in standard 19-inch racks or wall cabinets; runs on 120VAC commercial power.
$1,043.00 $685.99 Save $357.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8E4
Lifesafety Power FPO150-B100C8D8E4 8DR 150W DV system 4A/12V
- 150W dual-rail output delivers 4A at 12VDC and 4A at 24VDC simultaneously.
- Eight individually fused 3A supervised outputs isolate faults without cascading shutdowns.
- Single cabinet consolidates AC input, DC regulation, and field wiring termination.
$909.00 $597.99 Save $311.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C8D8E4A/T8-A
Lifesafety Power FPO150-B100C8D8E4A/T8-A Single FPO Buss/Flex Cab
- 100W bus assembly supports distributed power delivery across multi-point FPO panel layouts.
- Single flex cable kit simplifies split-feed configurations where centralized power runs are impractical.
- Designed for FPO-series panel architectures; verify connector pinout and firmware revision before install.
$1,863.00 $1,223.99 Save $639.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8PE6M/P8-A
Lifesafety Power FPO150-B100C8D8PE6M/P8-A 150W power supply 12A
- Delivers 12VDC/12A or 24VDC/6A from a single 150W unit for mid-scale access deployments.
- Eight relay outputs support failsafe, failsecure, or FAI modes for life-safety compliance.
- All 8 auxiliary Class 2 outputs meet NEC Article 725, simplifying low-voltage certifications.
$2,499.00 $1,641.99 Save $857.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8E4-4SL1
Lifesafety Power FPO150-B100C8D8E4-4SL1 8DR Dv E4 150W 8 Lock
- 150W output supports 8 dedicated lock circuits plus 8 auxiliary outputs on one supply.
- Dual 12VDC and 24VDC outputs at 2A each serve mixed-voltage door control installations.
- 20×16×4.5-inch enclosure fits standard electrical cabinets and DIN rail deployments.
$1,060.00 $696.99 Save $363.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C8D8PE4M1
Lifesafety Power FPO150-B100C8D8PE4M1 FPO150-B100C8D8PE4M1
- Delivers 150W at dual 12V/24V output to feed cameras, locks, and sensors.
- 8-channel mercury relay module enables coordinated switching across multi-zone loads.
- Wall-mount profile (24×20×4.5 in) fits IT closets and junction boxes efficiently.
$1,339.00 $879.99 Save $459.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C8D8E4M
Lifesafety Power FPO150-B100C8D8E4M 8DR 150W DV system 4A/12V
- 150W dual-output supply delivers 4A at 12VDC and 4A at 24VDC on independent rails.
- Eight individually fused 3A auxiliary outputs prevent cascading failures from downstream shorts.
- E4M cabinet with Mercury back plate supports DIN-rail mounting for organized terminal routing.
$1,065.00 $699.99 Save $365.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C82D8PE6M/P8-A
Lifesafety Power FPO150-B100C82D8PE6M/P8-A 150W power supply 12A
- Delivers 12A@12VDC or 6A@24VDC primary to power cameras, readers, and strikes in one zone.
- 16 class-2 auxiliary outputs at 2.5A each, assignable to Bus1 or Bus2 for circuit isolation.
- Four relay outputs support failsafe, failsecure, or FAI logic for compliant door control.
$2,665.00 $1,750.99 Save $914.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO150-B100C82D8PE4M/T8-A
Lifesafety Power FPO150-B100C82D8PE4M/T8-A 8DR E4M 150W 4A/12V
- 150W redundant supply delivers 4A at 12V and 4A at 24V across 8 isolated outputs.
- Dual-voltage design powers legacy 12V cameras and 24V access control from one unit.
- Eight separate output channels eliminate daisy-chain voltage sag across locks and readers.
$1,850.00 $1,215.99 Save $634.01The item has been added -
Lifesafety Power
SKU: FPO150-B100C82D8PE6M/T8-A
Lifesafety Power FPO150-B100C82D8PE6M/T8-A 8DR E6M 150W 4A/12V&4A
- Dual-rail 12V/24V DC output powers mixed-voltage devices from a single 150W chassis.
- Eight independent outputs let you distribute mag locks, strikes, and strobes without daisy-chaining.
- 120V AC mains input; each output rail is capped at 4A to prevent thermal overload.
$2,422.00 $1,590.99 Save $831.01The item has been added