Pendant Mounts & Brackets for Surveillance Cameras

Plan Your Deployment

Camera compatibility and mounting interface alignment
Required drop length and ceiling height considerations
Load-bearing capacity and structural support requirements
Indoor vs outdoor environmental conditions
Service access and long-term stability planning

Showing Results for Pendant Mounts & Brackets

Compare

Out of stock
Axis

SKU: 02837-001

Axis TM4101 Pendant Mount Kit - 02837-001

Pendant mount for Axis IP cameras with 1.5" NPS and standard piping
- 1.5" NPS threaded brackets compatible with 3/4" and M20 pipe standards
- Indoor overhead mounting solution for secure camera suspension
- White housing designed for retail, corporate, and institutional deployments
Special Order · Ships in 2-3 weeks

$49.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02924-001

Axis TP3105-E Black Pendant Mount Kit - 02924-001

Pendant mount kit for Axis P37 cameras with 1.5" NPS threaded connection
- 1.5" NPS threaded bracket connects directly to standard steel pipe
- Black powder-coated metal construction rated for indoor and outdoor use
- Supports pole, parapet, and corner mounting in single kit configuration
In stock · Ships same business day

$125.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02925-001

Axis TP3106-E Pendant Kit 1.5" NPS - 02925-001

1.5" NPS threaded pendant kit for ceiling-mounted camera installations
- Threads directly onto 1.5" NPS conduit—no adapters required for standard installations
- Black finish blends into overhead structures in retail, corporate, and hospitality spaces
- Rated for indoor and outdoor use including covered areas, docks, and canopies
In stock · Ships same business day

$62.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02855-001

Axis TQ3103-E Pendant Kit Mounting Solution - 02855-001

Pendant mount for Axis Q36 cameras on poles, parapets, rooftop corners
- 1.5" NPS threaded bracket fits existing pole and pipe structures
- Mounts Axis Q36 series cameras to rooftops, perimeter poles, outer corners
- Outdoor weatherproof housing with professional-grade fasteners included
In stock · Ships same business day

$154.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02110-001

Axis TQ6501-E Heavy-Duty Parapet Mount - 02110-001

40 kg parapet mount with IK10 impact rating for rooftop camera rigs
- Handles 40 kg load capacity for multi-camera or dual PTZ deployments
- IK10-rated aluminum body resists 20J impact strikes without damage
- Bottom and M20 side cable routing integrates with Axis pendant kits
In stock · Ships same business day

$274.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156LMW

Hanwha SBP-156LMW White Telescoping Parapet Mount

Telescoping parapet mount for Wisenet PTZ, 853–1116mm height range
- Adjustable height 853–1116mm handles variable parapet thickness without field cuts
- Aluminum alloy with white powder coat resists salt spray and UV degradation
- Lightweight 7.1 kg design enables solo rooftop installation by one technician
In stock · Ships same business day

$435.00 $330.99 Save $104.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-156LMW1

Hanwha SBP-156LMW1 Telescopic Parapet Mount

Telescopic parapet mount with 835–1098 mm height adjustment for outdoor camera placement
- Adjustable arm compensates for varying wall thicknesses without custom fabrication or hardware swaps
- Aluminum construction with RAL9003 white finish resists rust and UV degradation in outdoor exposure
- Compact 1000 × 95 mm base minimizes visual footprint and wind load on parapet edges
In stock · Ships same business day

$410.00 $307.99 Save $102.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-2CTW1

Hanwha SBP-2CTW1 White Suspended Ceiling Tile for Pendant Mount

White suspended ceiling tile for Hanwha pendant mounts, 60 lb capacity
- 1.5" NPT female thread fits all Hanwha pendant mounts and schedule 40 columns
- Cold rolled steel with scratch-resistant epoxy finish resists wear in any ceiling
- Pre-drilled knockouts for electrical boxes speed up in-ceiling installation
Special Order · Ships in 2-3 weeks

$150.00 $114.99 Save $35.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CM

Hanwha SBP-300CM Pendant Mount for Surveillance Cameras

12-inch aluminum pendant mount for Hanwha ceiling cameras
- 12-inch standoff clears drop ceilings, ductwork, and sprinkler heads
- 1½" female thread matches standard Hanwha camera adapters
- Aluminum construction with ivory finish resists corrosion indoors/outdoors
In stock · Ships same business day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300CMI

Hanwha SBP-300CMI White Pendant Mount

White pendant mount for overhead camera installation, ø140 × 305mm
- Aluminum construction with RAL9003 white powder coat resists corrosion
- 305mm drop length positions cameras to avoid ceiling glare and washout
- M10 universal thread compatible with SBP-120HMW, 140HMW, 160HMW1, 180HMW1
In stock · Ships same business day

$90.00 $68.99 Save $21.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM

Hanwha SBP-302CM Telescopic Pendant Mount

Telescopic pendant mount with adjustable height for indoor/outdoor camera placement
- Extend or retract to dial in optimal camera angle without custom brackets
- Indoor and outdoor rated construction withstands temperature swings and moisture
- Pairs with Hanwha SBP-302CMA mounting plate for validated, secure camera hold
In stock · Ships same business day

$250.00 $187.99 Save $62.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMAS

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Telescopic pendant mount with swivel for flexible camera positioning
- Adjusts 4.5–8 feet high to fit standard ceiling heights without custom conduit
- ±45° swivel adaptor allows precise aiming in either direction after install
- Aluminum and steel hybrid resists corrosion in damp indoor and covered outdoor
In stock · Ships same business day

$400.00 $299.99 Save $100.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-302CMASW

Hanwha SBP-302CMASW White Telescopic Pendant Mount

White telescopic pendant mount with 4.5–8 ft extension and swivel
- Extends 4.5 to 8 feet with 45° pivot angle for flexible camera positioning
- 1.5-inch NPT thread compatible with Hanwha white hanging mount systems
- Corrosion-resistant white finish built for durable ceiling-mounted installations
In stock · Ships same business day

$400.00 $304.99 Save $95.01
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMB

Hanwha SBP-302CMB Pendant Mount Back Box

Pendant mount back box for ceiling-suspended camera systems
- Stabilizes pendant-mounted cameras; prevents drift and vibration shift
- Indoor/outdoor rated construction handles retail, corporate, and warehouse
- Works with SBP-302CM(W) telescopic pendant mounts; standard tool install
In stock · Ships same business day

$190.00 $142.99 Save $47.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-35PVMW

Hanwha SBP-35PVMW Telescopic Pendant Mount

Telescopic pendant mount for PVM monitors, 3–5 ft range with 360° rotation
- Extends 3 to 5 feet to accommodate varied ceiling heights in surveillance setups
- Full 360° rotation and ±25° tilt for optimal viewing angles without repositioning
- Fits 75×75mm and 100×100mm VESA patterns; aluminum and steel construction
Special Order · Ships in 2-3 weeks

$160.00 $119.99 Save $40.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-59PVMB

Hanwha SBP-59PVMB Telescopic Pendant Mount

Telescopic pendant mount for PVM monitors, 5–9 ft reach with 360° rotation
- Extends 5 to 9 feet for high-ceiling installations with full 360° rotation
- Tilts −25° down from level to optimize viewing angle and reduce glare
- Dual VESA support (75×75 mm, 100×100 mm) fits multiple monitor sizes
Special Order · Ships in 2-3 weeks

$200.00 $149.99 Save $50.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Camera Weight Compatibility

Verify pendant mount load capacity against camera model weight plus lens assembly. PTZ and multi-sensor domes exceed fixed-camera weight; confirm structural certification before deployment. Undersized mounts risk camera drift and coverage loss during critical incident moments.

Ceiling Height & Drop Length

Pendant mounts require accurate ceiling measurement to select proper tube length (typically 12–48 inches). Longer drops increase sway in high-wind or mechanical-vibration zones; shorter drops may not clear HVAC ducts or structural beams. Plan conduit routing before finalizing drop length.

Cable Management & PoE Routing

Pendant installations must account for PoE cable routing through the drop tube or adjacent conduit. Ensure cable bends do not exceed vendor specs (typically 5x cable diameter) and plan for future cable upgrades or camera swaps.

Environmental & Vibration Considerations

Ceiling-suspended mounts in industrial or high-traffic areas experience sway and micro-vibration. Anti-vibration dampeners and rigid conduit support reduce jitter and maintain stable image capture. Consider HVAC ductwork and mechanical equipment proximity.

Installation & Maintenance Access

Pendant mounts require above-ceiling access for installation and future camera replacement. Confirm drop location avoids structural obstacles, electrical runs, and fire-suppression systems. Articulating arms improve accessibility for lens cleaning and focus adjustment.

Multi-Camera Pendant Arrays & Spacing

Large open spaces often require multiple pendant mounts for complete identification-distance coverage. Plan camera spacing using site blueprints and field-of-view calculations to avoid blind spots or overlapping zones that waste bandwidth and storage.

Technology Stack

The specs and acronyms that actually affect pendant mounts & brackets performance.

Load Rating (Static & Dynamic)

Measured in pounds or kilograms, indicating maximum sustained weight the mount can support. Dynamic ratings account for vibration and movement; always use static rating as the safe operating limit, not the dynamic specification.

Drop Tube Diameter & Material

Standard pendant tubes are 1.5–2 inch aluminum or steel, chosen for rigidity and corrosion resistance. Larger diameters reduce sway in high-ceiling installations; steel is heavier but resists flexing better than aluminum.

Cable Conduit & Strain Relief

Integrated or add-on conduit manages Cat-5e/Cat-6 PoE cables and protects them from physical damage. Strain relief collars prevent cable kinking at junction boxes, critical for maintaining link integrity across long drops.

Articulation & Tilt Range

Adjustable mounts offer pan (horizontal rotation) and tilt (vertical angle) within specified degree ranges, typically ±15–45 degrees. Enables fine-tuning camera aim without remounting, improving coverage without additional hardware.

Vibration Damping & Anti-Sway Hardware

Rubber isolators and lateral bracing reduce pendulum motion caused by wind, HVAC circulation, or foot traffic on nearby structures. Essential for PTZ cameras where vibration degrades pan/tilt accuracy and image stability.

Junction Box Integration & Weatherproofing

Built-in or bolt-on boxes house cable terminations and support weatherproof sealing (IP65+). Prevents moisture ingress into electrical connections, critical for suspended installations exposed to condensation or rooftop environments.

Typical Deployment Scenarios

Retail Warehouse with 16–20 ft Ceilings

12–16 pendant mounts deployed across 40,000 sq ft receiving and packing area. Each mount uses 24–30 inch aluminum tube, dual 4K fixed cameras per mount for aisle coverage, PoE-run conduit through drop, and anti-vibration collars to minimize forklift-induced sway. Related: ceiling and hanging mounts.

Manufacturing Floor with Machinery Vibration

8 heavy-duty pendant kits supporting 40 lb PTZ domes above production lines. Rigid steel tubes (2 inch diameter), articulating arms for pan/tilt adjustment, vibration dampeners rated for 10+ Hz equipment noise, and sealed junction boxes with drip loops prevent electrical failures.

Multi-Story Atrium or Lobby

6 long-drop pendant mounts (48–60 inch) for 25–30 ft ceiling heights. Axis and Hikvision OEM pendant assemblies with integrated conduit, load ratings 35+ lbs, tilt-pan arms for corner positioning, and redundant cable sleeves for future network upgrades.

School Gymnasium or Sports Facility

10–14 pendant mounts for complete court and seating-area coverage. Adjustable telescoping arms accommodate recessed or drop-ceiling variations, anti-sway bracing limits vibration from occupant movement, and pendant kits include pre-configured cable runs and mounting templates.

Frequently Asked Questions

What is the difference between a pendant mount and a ceiling mount?

Pendant mounts suspend cameras from above using a rigid tube or cable drop, ideal for high ceilings and open spaces where mounting directly to the ceiling is not practical. Ceiling mounts bolt directly to ceiling structure, suit lower ceilings, and require less drop-length planning. Choose pendant for theaters, warehouses, or atriums; ceiling mounts for standard drop ceilings.

How do I calculate the correct pendant tube length?

Measure the distance from the structural ceiling (or roof deck) to the desired camera lens height. Subtract 2–4 inches for junction box and mounting bracket. Pendant tubes come in standard lengths (12, 18, 24, 30, 36, 48 inches); order the next-larger size if your measurement falls between standards. Over-length tubes can be cut; under-length tubes cannot be extended without additional coupling hardware.

Can I use a pendant mount with a PTZ camera?

Yes, but only with heavy-duty pendant kits rated for 35+ lbs and equipped with vibration dampeners. PTZ motors create micro-vibration and pan/tilt forces; undersized mounts or rigid arms without isolation will transmit this motion into the drop tube, causing image jitter and reducing pan/tilt accuracy. Confirm load rating in the camera and mount datasheets.

What cable management options are available for pendant installations?

Pendant mounts typically include integrated conduit sleeves or optional bolt-on conduit tubes that house PoE cables alongside the drop. Add cable clips, spiral wrap, or separate J-channels for organized routing. Plan for 25–30% conduit fill to allow future cable upgrades and maintain proper bend-radius specifications (typically 5x cable diameter minimum).

How do vibration dampeners improve surveillance image quality?

Vibration dampeners (rubber isolators or spring-load collars) decouple the camera from the mount structure, reducing transmission of sway, mechanical noise, and wind-induced pendulum motion. This stabilizes the image and prevents jitter or micro-movements that degrade identification-distance performance. Critical in industrial, HVAC-heavy, or windy environments.

Are brand-specific pendant mounts (Axis, Hikvision, Pelco) required?

No, but OEM mounts from Axis, Hikvision, Pelco, and others are certified for weight, vibration, and integration with their cameras and software platforms. Third-party universal mounts work if load ratings match, but OEM kits eliminate compatibility questions and include tested junction-box and cable routing designs. For critical or large deployments, OEM certification simplifies troubleshooting.

Pendant Mounts & Brackets

Plan Your Deployment

Showing Results for Pendant Mounts & Brackets

Axis TM4101 Pendant Mount Kit - 02837-001

Axis TP3105-E Black Pendant Mount Kit - 02924-001

Axis TP3106-E Pendant Kit 1.5" NPS - 02925-001

Axis TQ3103-E Pendant Kit Mounting Solution - 02855-001

Axis TQ6501-E Heavy-Duty Parapet Mount - 02110-001

Hanwha SBP-156LMW White Telescoping Parapet Mount

Hanwha SBP-156LMW1 Telescopic Parapet Mount

Hanwha SBP-2CTW1 White Suspended Ceiling Tile for Pendant Mount

Hanwha SBP-300CM Pendant Mount for Surveillance Cameras

Hanwha SBP-300CMI White Pendant Mount

Hanwha SBP-302CM Telescopic Pendant Mount

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Hanwha SBP-302CMASW White Telescopic Pendant Mount

Hanwha SBP-302CMB Pendant Mount Back Box

Hanwha SBP-35PVMW Telescopic Pendant Mount

Hanwha SBP-59PVMB Telescopic Pendant Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Pendant Mounts & Brackets

Frequently Asked Questions

Related Categories

Engineering Reading