Axis TQ6501-E Heavy-Duty Parapet Mount - 02110-001

Axis 02110-001 TQ6501-E Parapet Mount

Overview

The Axis 02110-001 is a heavy-duty aluminum parapet mount built for elevated camera installations where durability and load capacity matter. At 40 kg maximum load capacity, it handles multi-camera deployments on parapets, poles, and rooflines without compromise. This accessory integrates with the broader Axis IP camera ecosystem and delivers the cable management and weather sealing that field integrators expect from a site-hardened mounting solution.

Key Features

• 40 kg maximum load capacity — supports multi-camera rigs, dual PTZ units, or heavy optics without overstressing the structure. Critical when stacking cameras or mounting large telephoto lenses on a single pole.
• IK10-rated aluminum body — impact resistance rated for 20J strikes (equivalent to a 5 kg steel ball dropped from 1.56 m). In high-traffic industrial sites or vehicle-prone areas, this prevents accidental damage from bumps or thrown objects.
• Corrosion-resistant aluminum with white (NCS S 1002-B) finish — resists salt, humidity, and UV without gallvanic pairing issues. Field-repainting is supported if site colors require it.
• Flexible cable routing: bottom cable hole and M20 side conduit hole — organizes power, network, and (if present) coax runs. Keeps cables out of sight and reduces snagging risk on rooflines.
• Compatible with Axis pendant kits (1.5" NPS/NPT inner thread) and ACI ¾" conduit adapters — integrates with standard Axis mounting ecosystems, reducing custom fabrication and compatibility debugging during install.
• Weather sealing: included AXIS T91A6 Pipe Seal — ensures rain and moisture don't pool around the conduit entry, extending camera and cable lifespan in humid or high-rainfall regions.
• Compact footprint: 754 mm (29.6 in) height, 2.5 kg weight — minimal wind load and vibration, important on tall structures or when mounting alongside HVAC equipment that generates micro-vibrations.
• PVC-free and halogen-free construction — meets building codes in critical facilities and reduces fire load in enclosed spaces. Not a marketing add-on if your jurisdiction enforces these standards.

Integration & Compatibility

The 02110-001 pairs directly with outdoor IP cameras from the Axis P56, Q60, Q61 Series and AXIS M5525–E models. It accommodates both inside and outside parapet positioning, allowing flexibility in sight lines and cable runs. The pendant kit interface (1.5" NPS/NPT) is industry-standard, but verify your camera's mounting foot before ordering — older Axis models use different thread standards. For cable management, the bottom hole accepts ½" conduit or cable glands; the M20 side hole handles ¾" conduit. Plan conduit sizing and radius bends before installation to avoid field rework.

Typical Deployments

Parking lot perimeter monitoring with clustered cameras on a single pole. Stadium or arena roofline installations where multiple angles converge. Industrial facility monitoring where elevated height minimizes blind spots from equipment or vehicles below. Any scenario requiring multi-camera rigs at height with reliable all-weather protection.

What's in the Box

• 1x Axis TQ6501-E Parapet Mount (aluminum body, pre-drilled)
• 1x AXIS T91A6 Pipe Seal (rubber, weatherproofing)

Frequently Asked Questions

Q: What is the maximum load on the Axis 02110-001?

A: 40 kg total. This covers a typical dual-camera rig with moderate optics, or a single large PTZ unit. Weigh your camera(s) and lens assembly before ordering to confirm fit.

Q: Can the 02110-001 be used indoors?

A: Yes. The mount is rated for both indoor and outdoor parapet positioning, though the IK10 rating and corrosion resistance are overkill for climate-controlled interior spaces. Use it indoors if site aesthetics or uniform hardware requirements demand it.

Q: Does the mount support inside or outside parapet installation?

A: Both. Configure it to clamp or bolt on either face of the parapet edge, depending on your sight line and cable routing needs. Verify your parapet thickness (typically 4–6 inches) before install.

Q: What conduit sizes does the 02110-001 accept?

A: M20 side hole for ¾" conduit; bottom cable hole for ½" conduit or cable glands. Non-standard sizes require adapters (not included).

Q: Is repainting allowed if the site color is not white?

A: Yes. The aluminum body can be repainted. Use exterior-grade epoxy or polyester primers to maintain corrosion protection. Do not paint over the threaded inserts without masking.

Q: What is the warranty?

A: 3-year Axis warranty covers defects in materials and workmanship. Damage from improper installation, overloading, or environmental abuse is not covered.

Ted Perry

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

The Axis 02110-001 is a workhorse parapet mount for integrators managing multi-camera roofline and elevated-structure deployments. Its IK10 rating and 40 kg load capacity are not marketing window dressing — they solve real field problems when cameras must survive wind load, thermal cycling, and the occasional impact from maintenance crews.

Technical Highlights:

• 40 kg capacity: Supports dual large-sensor cameras or a single PTZ without introducing deflection or vibration into the video stream. Critical for long-range optics where even millimeter-scale sway introduces focus drift.
• IK10 impact rating (20J; 5 kg steel ball from 1.56 m): Eliminates worry about accidental strikes from ladders, drones, or tool drops during rooftop work. One unplanned impact on an unrated bracket can cost you a camera replacement; IK10 buys insurance.
• M20 side conduit hole + bottom cable hole: Dual routing paths let you segregate power (bottom) and network/coax (side), reducing EMI coupling and simplifying troubleshooting if a cable goes bad. Also keeps cable runs off the side of the building where they're visible and vulnerable.
• PVC-free, halogen-free aluminum: Not optional in data centers or hospitals. The minute you touch code-regulated facilities, this spec eliminates review friction and potential project delays.

Deployment Considerations:

• Parapet thickness: Verify your parapet is solid and typically 4–6 inches thick. Thin metal parapet returns (ornamental coping) will not safely anchor a 40 kg load; you'll need to bolt into the structural edge.
• Pendant kit thread compatibility: The 1.5" NPS/NPT female thread accepts standard Axis pendant kits. Verify your camera's mounting foot thread before order confirmation — older or non-Axis PTZ heads may require an adapter, adding cost and complexity.
• Cable strain relief: The included T91A6 Pipe Seal is a rubber grommet, not an industrial cable gland. If you're routing 6+ cables through a single hole under tension, consider a separate screened cable gland with strain relief to prevent pinching and future maintenance headaches.

Deploy the 02110-001 on parking structures, stadium rooflines, and industrial facilities where multi-camera elevation is non-negotiable and weather durability is measured in years, not months. This mount earns its cost-per-camera-year ratio in reduced rework and field warranty claims.