Axis 02924-001 TP3105-E Black Pendant Mount Kit
Overview
The Axis 02924-001 is a metal pendant mounting kit engineered to secure Axis P37 series cameras to pole, parapet, and corner infrastructure. The 1.5" NPS (National Pipe Size) threaded connection integrates with standard building-mounted pipe runs found in most commercial and industrial facilities, eliminating the need for custom fabrication or adapter plates. Black powder-coated finish blends into modern architectural environments without drawing attention to surveillance infrastructure.
Key Features
- 1.5" NPS Threaded Bracket: Connects directly to standard steel pipe commonly installed on building exteriors and parking structures — no special adapters or custom mounting plates required, reducing installation time and inventory complexity.
- Metal Construction: Durable steel frame withstands repeated installation cycles and vibration from weather or traffic without creep or bracket slippage — critical on tall pole mounts where micro-movement compounds over time.
- Weather-Resistant Design: Rated for indoor and outdoor deployment; metal body and fasteners resist corrosion in salt-air and humid environments, though annual inspection of threaded connections is recommended in coastal installations.
- Multi-Orientation Support: Accommodates pole mounts (vertical pipe runs), parapet mounting (roof edge), and outer corner installations (building perimeter corners) — single kit covers three common deployment patterns.
- Professional Black Finish: Powder-coated matte black minimizes visual profile and glint in daylight or artificial lighting — matters when integrating surveillance into aesthetically sensitive sites (office parks, retail centers, residential perimeters).
- Compatible with Axis P37 Series: Designed specifically for P37 camera form factors; verify your P37 model before ordering, as some variants may require alternative brackets — confirm via Axis compatibility documentation.
Integration & Compatibility
This pendant kit integrates with standard 1.5" steel pipe infrastructure. Verify your mounting surface is vertical (pole), horizontal (parapet), or corner-aligned before installation. The bracket does not include pole or piping — you must source or reuse existing 1.5" NPS pipe runs. For projects requiring network video recorders or power distribution planning, account for cable runs from the camera to your PoE switch or power supply; pendant height adds cable slack management complexity on tall mounts. Consult local wind-load codes if mounting in high-wind regions; Axis does not publish a maximum wind speed rating for this bracket, so structural engineering sign-off may be required for heights above 30 feet.
Frequently Asked Questions
Q: Does the 02924-001 include the 1.5" pipe, or just the bracket?
A: The kit includes only the mounting bracket and fasteners. You must source or reuse existing 1.5" NPS steel pipe on your building or pole structure.
Q: Can I use this pendant kit indoors?
A: Yes. The weather-resistant design supports both indoor (e.g., warehouse ceiling mounts on structural steel) and outdoor deployment. Indoor installations face lower corrosion risk, so fastener longevity is typically longer.
Q: Is the bracket adjustable for different camera angles?
A: The 02924-001 secures the camera to the pole; pan/tilt capability depends on your camera model's mount interface, not the pendant bracket. Some P37 variants include adjustable mounts; check your specific camera's documentation.
Q: What tools do I need to install the 02924-001?
A: Standard wrench set (size depends on Axis fastener spec) and a pipe wrench to grip the 1.5" NPS connection are typical. Exact hardware details are in the Axis installation guide; do not attempt to hand-tighten without documentation.
Q: Can this bracket handle multiple cameras on one pipe?
A: A single 02924-001 mounts one P37 camera. For multi-camera poles, order one kit per camera and space them vertically along the pipe to avoid line-of-sight obstruction.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Axis 02924-001 (often searched as 02924 001) solves a real installation headache on building perimeters: integrating a fixed P37 camera to existing steel pole infrastructure without custom machining. The 1.5" NPS threaded bracket is the differentiator here — it threads directly onto standard pipe runs, meaning no adapter plates, no welding, and no coordination with structural steel crews.
Technical Highlights:
- 1.5" NPS Threaded Connection: Matches the vast majority of commercial building pole and parapet pipe; eliminates adapter inventory and reduces parts count per installation — one kit handles pole, parapet, or corner orientation without switching brackets.
- Metal Construction and Fasteners: Powder-coated steel withstands weathering cycles and vibration, preventing bracket creep — measurable on tall mounts (15+ feet) where even 1/8" drift compounds line-of-sight errors over 6–12 months.
- Black Aesthetic: Powder-coat finish reduces visual noise on modern façades; matters for corporate campuses and retail perimeters where gray or shiny brackets undermine architectural integration.
Deployment Considerations:
- The kit does not include pipe or threaded studs — verify your mounting surface already has 1.5" NPS pipe installed before ordering. A surprise site survey gap here derails project timelines.
- Wind-load rating is not published by Axis. On tall poles (30+ feet) in high-wind zones, request a structural engineering assessment or contact Axis field support to confirm lateral load limits — do not assume unlimited wind rating.
- Cable slack management: pendant height adds vertical run length; plan for cable routing and drip loops at the bracket before installation to avoid water ingress at connector points.
Deploy the 02924-001 when your site survey confirms 1.5" NPS pole or parapet pipe, and when you want a single-source bracket for multiple mounting orientations. It's the right choice for coordinated building perimeter rollouts or parking structure upgrades where you can amortize the bracket cost across multiple camera locations on the same pipe run.
