Mounting Brackets & Kits
Sub categories
Showing Results for Mounting Brackets & Kits
-
ACTi
SKU: CTI-SRVCS-45MIN
ACTi Clear Touch Virtual 45 MIN Training Class - CTI-SRVCS-45MIN
- Instructor-led, 45-minute virtual session fits into active project schedules.
- Curriculum aligned to current firmware ensures team trains on the live platform.
- Completion certification documents qualified personnel for project records.
$333.00 $291.99 Save $41.01The item has been added -
ACTi
SKU: CTI-WFMOD-DBAX
ACTi Clear Touch WIFI Module - Dual Band - CTI-WFMOD-DBAX
- Dual-band 2.4 GHz and 5 GHz support lets you select the cleaner frequency at each site.
- Eliminates cable runs to compatible ACTi cameras in retrofits or hard-to-wire locations.
- Installs into the dedicated WiFi expansion slot; configured via the ACTi management interface.
$59.00 $58.99 Save $0.01The item has been added -
ACTi
SKU: CTI-CMST01-SCRN
ACTi Clear Touch Wireless Battery-powered - CTI-CMST01-SCRN
- Battery-powered design eliminates conduit runs and simplifies installation locations.
- Wire-free deployment supports flexible mounting without dedicated power infrastructure.
- ACTi-engineered hardware integrates into existing ACTi ecosystem with consistent commissioning.
$8,499.00 $7,546.99 Save $952.01The item has been added -
ACTi
SKU: CTI-CMST01-MIC
ACTi Clear Touch Wireless Battery-powered 2 - CTI-CMST01-MIC
- Battery-powered operation eliminates need for PoE or AC wiring at the install point.
- Wireless design reduces installation complexity in field deployments with no power runs.
- Integrates into ACTi camera and access control workflows as a flexible accessory.
$699.00 $620.99 Save $78.01The item has been added -
ACTi
SKU: CTI-CMST01-PTZ
ACTi Clear Touch Wireless Battery-powered 4K - CTI-CMST01-PTZ
- Battery-powered design eliminates control cabling in retrofit and mobile deployments.
- Clear Touch wireless interface delivers direct pan, tilt, and zoom without tethered lines.
- Designed for ACTi 4K PTZ cameras — verify model compatibility before installation.
$3,799.00 $3,373.99 Save $425.01The item has been added -
ACTi
SKU: CMS-200
Acti CMS-200 1600-Channel 1-Bay Rackmount Standalone
1600-channel rackmount NVR with thermal imaging and H.265 compression
- Thermal + 850nm infrared night vision for perimeter and industrial monitoring
- H.265, H.264, MJPEG compression with Video Motion Detection analytics
- PoE-powered 1-bay rackmount with synchronized audio recording capability
$10,049.00 $6,754.99 Save $3,294.01The item has been added -
ACTi
SKU: CTI-CMST01-KIT2
ACTi Command Studio Live Streaming AND - CTI-CMST01-KIT2
- Aggregates multiple ACTi IP camera feeds into one broadcast-ready output over Ethernet.
- ONVIF Profile S/T support enables integration with compliant third-party cameras.
- Deploys on Windows or Linux hosts without full-scale VMS infrastructure investment.
$14,999.00 $13,317.99 Save $1,681.01The item has been added -
ACTi
SKU: CTI-CMST01-KIT2+TAF
ACTi Command Studio Live Streaming AND - CTI-CMST01-KIT2+TAF
- Extends live feed delivery to remote endpoints without additional streaming infrastructure.
- Software-only module deploys via Command Studio management interface — no hardware required.
- Supports distributed monitoring centers, mobile clients, and cloud dashboards from one module.
$17,379.00 $16,134.99 Save $1,244.01The item has been added -
ACTi
SKU: CTS-CS100-BTWC
ACTi Conference Speaker/microphone - CTS-CS100-BTWC
- Six-array omnidirectional mic captures voices across a 3–6 ft radius without repositioning.
- Bluetooth plus USB dongle support integrates with laptops, tablets, and standard VMS audio inputs.
- Wireless and USB charging with 8-hour talk time supports mobile and temporary deployment scenarios.
$199.00 $176.99 Save $22.01The item has been added -
ACTi
SKU: SMAX-0152
ACTi Converter Ring with Mount Kit for all Dome - SMAX-0152
- Bundles PMAX-0808 converter ring and PMAX-0101 mount kit in one SKU to cut ordering steps.
- Supports ceiling and wall mounting, covering standard commercial and industrial install scenarios.
- Compatible with all ACTi standard dome cameras; excludes mini dome variants—verify model before ordering.
$117.00 $116.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0243
ACTi Converter Ring with Mount Kit for the D5x D9x - SMAX-0243
- Adapts D5x, D9x, E5x, E9x, and E9xx cameras to existing ceiling or wall mounts.
- Passive mechanical kit—no power or network config needed; installs with a standard socket set.
- Eliminates new conduit runs when retrofitting mixed ACTi D-series and E-series camera fleets.
$42.00 $41.99 Save $0.01The item has been added -
ACTi
SKU: CTI-STAND-CONM-V3
ACTI Convertible Mobile Stand - Cti-Stand-Conm-V3
- Eliminates fixed mounting, enabling camera repositioning without drilling or wall prep.
- Supports temporary, pilot, and event deployments where coverage strategy may evolve.
- Engineered for ACTi camera lines — verify model compatibility before ordering.
$2,599.00 $2,319.99 Save $279.01The item has been added -
ACTi
SKU: WALL-CONR
ACTi Corner Bracket FOR Wall-adp - WALL-CONR
- Mounts ACTi wall adapters flush at 90-degree corners without custom fabrication.
- Eliminates alignment gaps and weak points common with improvised corner assemblies.
- Optimizes camera coverage geometry across perpendicular planes at building perimeters.
$150.00 $149.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0409
ACTi Corner Mount (for A7x Z714 Z724 Z8x Z9x Z972 - PMAX-0409
- OEM-fit corner mount engineered specifically for A7x, Z714, Z724, Z8x, Z9x, and Z972 models.
- Maintains original housing environmental and ingress ratings — no compromise from aftermarket substitutes.
- Documented MPN PMAX-0409 streamlines BOM entry, warranty tracking, and depot service referencing.
$141.00 $140.99 Save $0.01The item has been added -
ACTi
SKU: CTI-6065K+UH20
ACTI Cti-6065k+uh20
- Factory-new ACTi component ensures standardized compatibility within ACTi deployments.
- Verify mounting environment and wiring standards prior to installation per ACTi docs.
- Confirm model-specific compatibility against ACTi matrix before procurement.
$4,299.00 $3,562.99 Save $736.01The item has been added -
ACTi
SKU: CTI-7086XT-UH20
ACTI Cti-7086XT-UH20
- Purpose-built ACTi accessory reduces integration complexity in ACTi-standardized deployments.
- SKU-specific fit: verify CTI-7086XT-UH20 against your deployment docs before ordering.
- Follows standard ACTi installation workflows, minimizing configuration overhead on-site.
$11,949.00 $10,612.99 Save $1,336.01The item has been added
Mounting Brackets & Kits
Mounting brackets and kits provide secure and stable installation for IP cameras, intercom systems, access control devices, and related security equipment. Selecting the correct mounting solution ensures proper device alignment, weather protection, and long-term reliability.
Plan Your Deployment
- Wall, ceiling, pole, or corner mounting requirements
- Indoor vs outdoor environmental exposure
- Device model compatibility and load capacity
- Vandal resistance and tamper considerations
- Future service access and cable routing planning
Mounting Brackets & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 1048 working models of mounting brackets & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 2MP, 4MP, Thermal, 8MP, 6MP, 20MP+, 5MP, 16MP |
| IP Rating | IP65, IP66, IP42, IP68, IP67, IP33, IP43, IP30 |
| Connectivity | Wired, Bluetooth, Wi-Fi, Cellular |
| Power | PoE, PoE+, AC/DC, Battery, PoE++, 24VAC, 12-24V AC/DC |
| Channels | 8, 16, 4 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.