ATEN 2X034G Easy Rack Mount Kit — Short 42–70 cm
Overview
The ATEN 2X034G is a rack mounting kit sized for shallow enclosures, purpose-built to secure the VM3200 modular matrix switch in standard 19-inch racks with a cabinet depth of 42 to 70 cm. If your rack room or AV equipment closet runs shallower than a full-depth data-center cabinet, this kit closes the gap without improvised hardware or awkward rear-support rigging. The 2X034G handles the mechanical retention so the VM3200 sits level, ventilated, and accessible for card swaps or cabling work.
Compatibility
Designed specifically for the ATEN VM3200 Modular Matrix Switch. Verify your rack's usable interior depth falls within the 42–70 cm range before ordering — the standard full-depth kit covers longer cabinets and is a separate SKU. This kit is not a universal rail set; it is matched to the VM3200 chassis geometry and mounting hole pattern.
Installation Notes
Confirm interior cabinet depth (front-rail face to rear-rail face) measures between 42 cm and 70 cm. Install the VM3200 into a standard 19-inch rack using the kit's mounting points aligned to the switch's chassis ears. No rear cage-nut support is required within this depth range, but verify the rack's load rating accommodates the fully populated VM3200 — input/output boards add significant weight. Allow adequate clearance at the rear for cable management and airflow across the VM3200's exhaust vents.
