Power Supplies for Surveillance & Access Control Systems

Plan Your Deployment

Voltage and amperage requirements for connected devices
Centralized vs distributed power architecture
Redundancy and failover considerations
Indoor vs outdoor installation requirements
Code compliance and surge protection planning

Showing Results for Power Supplies

Compare

Out of stock
Digi International

SKU: 76000956

Digi International 76000956 XBee TH Grove Development Board

Grove-compatible dev board for XBee TH wireless mesh networks
- Works with XBee TH modules for temperature & humidity IoT sensing
- Grove connectors enable rapid sensor attachment without custom wiring
- Compact form factor (3.2 x 0.2 in) for field testing & prototyping
Special Order · Ships in 2-3 weeks

$25.99 $24.99 Save $1.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000958

Digi International 76000958 ConnectPort TS 16 19-Inch Replacement

19-inch rack-mount replacement for ConnectPort TS 16 terminal servers
- 16 serial ports for connecting legacy serial devices in data center environments
- Standard 19-inch rack form factor integrates directly into existing server racks
- Field replacement module compatible with ConnectPort TS 16 deployments
Special Order · Ships in 2-3 weeks

$32.99 $30.99 Save $2.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: 76000960

Digi International 76000960 Indoor Antenna

Indoor antenna for LTE/4G/3G networks, -40°C to 85°C operation
- LTE/4G/3G support at 410/450 MHz with SMA male connector
- Operates reliably from -40°C to 85°C in heated and unheated spaces
- Compact 109 x 10 mm form factor with ABS housing for infrastructure
Special Order · Ships in 2-3 weeks

$11.99 $10.99 Save $1.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Digi International

SKU: 76000965

Digi International 76000965 Power Supply for AnywhereUSB 2 Plus

5VDC power supply for AnywhereUSB 2 Plus remote connectivity
- Compact 118 x 54 x 37 mm form factor fits tight installation spaces
- Operates reliably across -30°C to +70°C for indoor/outdoor deployments
- UL, cUL, and CE certified for safe networked USB-over-IP installations
In stock · Ships same business day

$77.99 $74.99 Save $3.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: EZPS-AC

Digi International EZPS-AC Field Installable Power Supply

AC-powered field installable supply for industrial network infrastructure
- Field installable design—no external enclosure modification required
- Industrial-grade operating temperature for demanding deployment conditions
- Compatible with Digi networking and telecommunications equipment
Special Order · Ships in 2-3 weeks

$195.99 $187.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ITPS-PSEK

Digi International ITPS-PSEK Power Supply

Dedicated DC power supply for Digi Connect IT industrial platforms
- Purpose-built for telecom, security, and enterprise network infrastructure
- Integrates with Digi Connect IT appliances for mission-critical deployments
- Compact form factor at 3.23 x 11.3 x 12.83 inches for flexible installation
Special Order · Ships in 2-3 weeks

$414.99 $396.99 Save $18.00

Add to Cart
The item has been added
Compare

Out of stock
Digi International

SKU: ITPS-PSIK

Digi International ITPS-PSIK Power Supply Port

Power supply port module for Digi Connect IT rack systems
- Designed for indoor rack and cabinet deployment in security infrastructure
- Integrates with Digi Connect IT power supply ecosystem for modular configuration
- Compact form factor at 13.0 x 11.5 x 3.25 inches for standard installations
Special Order · Ships in 2-3 weeks

$414.99 $396.99 Save $18.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 321

DMP 321 40 VA Plug-In Transformer

40 VA plug-in transformer for networked access control systems
- TCP/IP compatible for integration with distributed security devices
- Compact plug-in form factor fits standard enclosures and cabinets
- Low-voltage DC output suitable for door readers and control systems
In stock · Ships same business day

$28.00 $15.99 Save $12.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 322

DMP 322 56 VA Wire-In Transformer

56 VA step-down transformer for multi-door access control wiring
- Wire-in design integrates directly into electrical panels without enclosures
- 56 VA capacity powers multiple readers, strikes, and control circuits
- Industrial-rated construction for continuous operation in security systems
Special Order · Ships in 2-3 weeks

$139.00 $67.99 Save $71.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 323

DMP 323 56 VA Wire-In Transformer

56 VA wire-in transformer for TCP/IP security systems
- 56 VA power rating supports networked access control and security devices
- Hardwired installation suits both retrofit and new construction deployments
- TCP/IP communication integrates with centralized security monitoring systems
Special Order · Ships in 2-3 weeks

$167.00 $88.99 Save $78.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 324

DMP 324 100VA Wire-In Transformer

100VA wire-in transformer for TCP/IP security systems
- 100VA capacity with permanent wire-in installation for door locks and readers
- TCP/IP network communication for integrated access control deployments
- Reliable power conversion designed for security and access control systems
Special Order · Ships in 2-3 weeks

$91.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 324P

DMP 324P 100 VA Wire-In Transformer

100 VA step-down transformer for hardwired cabinet security systems
- 100 VA capacity powers 3–6 readers and controllers simultaneously
- Wire-in permanent installation in cabinets eliminates loose connections
- TCP/IP compatible integration with networked access control platforms
In stock · Ships same business day

$180.00 $95.99 Save $84.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 327

DMP 327 50 VA Plug-In Transformer

50 VA plug-in transformer for TCP/IP security systems
- 50 VA capacity for credential readers, locks, and networked devices
- TCP/IP compatible integration with access control platforms
- Wall-mounted or cabinet installation for control rooms and enclosures
In stock · Ships same business day

$30.00 $15.99 Save $14.01

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 364/20

DMP 364/20 1.3 Ah 12 VDC Rechargeable Battery

12 VDC 1.3 Ah rechargeable battery for access control backup power
- 1.3 Ah capacity supports temporary power during outages or transitions
- Compatible with OSDP and TCP/IP systems using HID and NFC readers
- Rechargeable design for repeated use across access control installations
Special Order · Ships in 2-3 weeks

$504.99

Add to Cart
The item has been added
Compare

Out of stock
DMP

SKU: 365/4

DMP 365/4 9.0 Ah 12 VDC Battery

12 VDC sealed lead-acid backup for security panels and access control
- 9.0 Amp-hour capacity for emergency standby power during mains failure
- Sealed lead-acid construction rated 12 VDC for standard security architectures
- Compatible with control panels, wireless repeaters, and auxiliary security devices
Special Order · Ships in 2-3 weeks

$249.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
DMP

SKU: 366/2

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

18.0 Ah lead-acid battery backup for security and access control systems
- 18.0 Ah capacity sustains extended runtime during primary power loss
- Lead-acid chemistry for reliable operation in access control and alarm installations
- HID credential-compatible for integration into standard security architectures
In stock · Ships same business day

$258.99

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Amperage & Load Planning

Size your supply at 120–130% of peak load to avoid thermal shutdown and extend component life. A 24V system with five 5A devices (25A nominal) needs a 32A or 40A supply. Under-sizing is a leading cause of system failure during peak demand.

Redundancy for Life-Safety & Access Control

Single supplies fail without warning. Dual-supply designs or UPS-backed configurations ensure doors unlock and intercoms function during power anomalies. Redundancy is required by code in many jurisdictions for egress and emergency communication.

Voltage Selection & Device Compatibility

Most locks, readers, and access points run 12V or 24V; cameras vary widely. Verify every device's rated voltage before specifying. Mixing 12V and 24V systems in one cabinet requires isolated supplies or regulators to prevent cross-voltage damage.

PoE Power Budget Constraints

Standard PoE (802.3af) supplies 15.4W per port; PoE+ (802.3at) 30W; High Power (802.3bt) up to 95W. A 24-port switch can deliver only ~375W total, easily exhausted by dense camera and access-point deployments. Injectors and midspans extend capacity.

Environmental & Mounting Constraints

Outdoor cabinets and damp enclosures require sealed, conformal-coated supplies rated for temperature extremes (−20 to +70°C typical). DIN-rail mounting saves space; enclosed supplies offer better noise isolation and thermal dissipation in server rooms.

Vendor Selection & Lead Times

Brands like Honeywell, Speco Technologies, and HES dominate access-control power; Pelco and Digi International focus on surveillance and networking. Verify manufacturer support, warranty, and stock availability before design lock-in.

Technology Stack

The specs and acronyms that actually affect power supplies performance.

DC Voltage Regulation & Ripple

Quality supplies hold output within ±5% of rated voltage under load variations and input sags. Ripple (AC noise superimposed on DC output) should be <2% peak-to-peak; excessive ripple causes camera image noise and lock chatter. Look for ±5V, ±12V, ±24V stability specs in datasheets.

Current Rating & Amperage Classes

Expressed in Amps (A) at rated voltage—e.g., 24V/5A, 24V/10A, 24V/40A. Higher amperage doesn't mean faster devices; it determines how many devices can draw simultaneously. Always check individual device current draw in milliamps (mA) and sum peak totals, not averages.

Power Factor & Input Voltage Range

Industrial supplies accept 100–240V AC input (worldwide compatible) and deliver regulated DC output. Power factor >0.9 reduces heating and helps avoid utility surcharges. Check input range to ensure compatibility with generators and unclean site power.

Short-Circuit & Fuse Protection

Integral fusing (fast or slow blow) and electronic current limiting protect the supply and downstream wiring from overcurrent events. Some supplies auto-recover; others latch off and require manual reset. Verify protection mode and response time for your application.

UPS Integration & Holdup Time

Supplies with integral or stackable battery backup maintain output for 5–60 minutes during AC loss, bridging the time for graceful shutdown or backup power activation. Holdup time (hold-up capacitor reserves) is separate; typical range 10–50 ms.

PoE (Power over Ethernet) Standards

802.3af (Type 1) = 15.4W, 802.3at (Type 2/PoE+) = 30W, 802.3bt (Type 3/4, High Power) = 60–95W. Injectors and midspan splitters add PoE to non-PoE switches. Always verify endpoint compliance and total switch/injector budget vs. connected device demand.

Typical Deployment Scenarios

Small Office Access Control (Single Door)

One 12V/5A regulated supply feeds an electric strike lock, RFID reader, and request-to-exit button. Total load ~2A. A simple wall-mount supply with integral fuse handles this; add a surface-mount enclosure in humid areas. Budget: 1 supply, 1 backup fuse kit.

Mid-Size Surveillance Closet (16 IP Cameras + NVR)

A 24V/20A regulated DIN-rail supply powers four 5A PoE injectors (one per four cameras), plus the NVR's 24V auxiliary input. If cameras are all PoE-enabled and the switch is remote, injectors bridge the gap. Add a second supply for redundancy and a UPS battery module for 10-minute hold-up.

Multi-Building Campus with Distributed Access (8 Doors, 24 Cameras)

Each building requires a local 24V/10A supply (for locks, readers, intercoms) plus one or two PoE injectors per camera cluster. Cabinet-mounted DIN-rail supplies with integral breakers minimize field wiring. Specify weatherproof outdoor enclosures for exterior cabinets; trunk all power back to a central UPS for life-safety compliance.

High-Density Server & Intercom Integration

A redundant 24V/40A supply pair feeds six 24V devices (intercoms, door controllers, call stations) and distributes 12V to analog sensors via a buck regulator. Modular or multi-output supplies reduce cable clutter. Proper conduit routing and junction boxing maintain code compliance and thermal management.

Frequently Asked Questions

What size power supply do I need for my system?

Add up the current draw (in milliamps or amps) of every device connected to that supply—cameras, locks, readers, intercoms. Multiply by 1.25 (safety factor) and round up to the next standard supply size (e.g., 5A, 10A, 20A, 40A). Always verify supply and load voltage match exactly.

Can I use one power supply for mixed 12V and 24V devices?

No. Single outputs are isolated; mixing voltages risks damage. Use separate regulated supplies for each voltage, or a multi-output supply with isolated rails. If you must share a cabinet, use a buck converter (24V down to 12V) downstream of a 24V primary supply, but size the primary for total current demand.

What's the difference between a regular power supply and a UPS-backed supply?

A regular regulated supply converts AC to clean DC and stops when AC fails. A UPS-backed supply includes integral or stackable battery modules that maintain DC output for minutes after AC loss, allowing orderly shutdown or switchover to backup power. Essential for access control and emergency intercoms.

Do I need a PoE injector if my switch already has PoE?

Not necessarily, but injectors solve two common problems: (1) extending PoE to non-PoE switches, and (2) supplementing insufficient switch PoE budget. A 24-port PoE+ switch can only deliver ~375W total; dense deployments often need additional injectors per camera cluster. Plan your PoE budget carefully upfront.

What does ±5% voltage regulation mean?

The supply guarantees output stays within ±5% of rated voltage (e.g., 24V ±1.2V = 22.8–25.2V) across load and input variations. Tighter specs (±3%) cost more but reduce noise and improve camera image stability. Cameras typically tolerate ±10%; locks are pickier (±5% or better).

How do I mount a power supply in an outdoor cabinet?

Use a DIN-rail mounted supply inside an IP65-rated enclosure. Ensure the enclosure has ventilation or a thermostat fan to keep internal temperature below the supply's rating (typically 70°C max). Add a surge protector or SPD at the AC input, and run conduit from the cabinet to devices using conduit adapters and gang plates for strain relief.

Power Supplies

Plan Your Deployment

Showing Results for Power Supplies

Digi International 76000956 XBee TH Grove Development Board

Digi International 76000958 ConnectPort TS 16 19-Inch Replacement

Digi International 76000960 Indoor Antenna

Digi International 76000965 Power Supply for AnywhereUSB 2 Plus

Digi International EZPS-AC Field Installable Power Supply

Digi International ITPS-PSEK Power Supply

Digi International ITPS-PSIK Power Supply Port

DMP 321 40 VA Plug-In Transformer

DMP 322 56 VA Wire-In Transformer

DMP 323 56 VA Wire-In Transformer

DMP 324 100VA Wire-In Transformer

DMP 324P 100 VA Wire-In Transformer

DMP 327 50 VA Plug-In Transformer

DMP 364/20 1.3 Ah 12 VDC Rechargeable Battery

DMP 365/4 9.0 Ah 12 VDC Battery

DMP 366/2 18.0 Ah VDC Lead-Acid Battery

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Power Supplies

Frequently Asked Questions

Related Categories

Engineering Reading