Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
STI
SKU: STI-7504
STI STI-7504 Snooper Stopper Clear Keypad Reader
Clear keypad reader blocks shoulder surfing at door entry points
- Transparent housing lets users see keypad while preventing code observation
- Door-mounted design integrates with standard access control systems
- Compact 95mm × 75mm form factor fits most credential entry installations
$44.44 $43.99 Save $0.45The item has been added -
STI
SKU: STI-7505
STI STI-7505 Snooper Stopper Keypad Reader Smoke
- Smoke tint blocks shoulder-surf PIN reads at high-traffic entry points.
- Mounts over existing keypad hardware—no reader replacement required.
- Secured with six #8×1 in. screws into 3/16 in. holes; gasket trims to fit.
$44.44 $43.99 Save $0.45The item has been added -
STI
SKU: STI-7510A-HTR
STI STI-7510A-HTR Heated Polycarbonate Enclosure with Key Lock
- NEMA 4-rated polycarbonate shell blocks water spray and corrosion in outdoor deployments.
- Integrated heating plate keeps internals above freezing at 12, 16.5, or 24 VAC/VDC input.
- Key lock strike deters unauthorized removal of enclosed readers or access control hardware.
$258.50 $257.99 Save $0.51The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7510E
STI STI-7510E Polycarbonate Flush-Mount Lock/Strike Enclosure
Polycarbonate flush-mount enclosure for recessed door strike installation
- Open-back box design recesses fully into wall for clean, seamless appearance
- Polycarbonate construction resists impact damage in high-traffic access points
- Integrates with standard door frame and strike assemblies, thumb or key lock
$76.61 $75.99 Save $0.62The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7510F
STI STI-7510F Polycarbonate Access Control Enclosure with Key Lock Strike
Polycarbonate access control enclosure with key-lock strike for door integration
- Enclosed back box consolidates lock strike and reader wiring in one unit
- Exterior key-operated strike enables manual override without electrical power
- IP59-rated polycarbonate housing resists impact and weather on glass or frame mounts
$89.40 $88.99 Save $0.41The item has been added -
STI
SKU: STI-7510F-HTR
STI STI-7510F-HTR Heated Polycarbonate Enclosure Key Lock
- NEMA 4X-rated polycarbonate enclosure withstands outdoor, corrosive, and wet environments.
- Integrated heating element accepts 12, 16.5, or 24 VAC/VDC to prevent freeze-related failures.
- Mechanical key lock credential operates independently of any electronic access control system.
$258.50 $257.99 Save $0.51The item has been added -
STI
SKU: STI-7511A-HTR
STI STI-7511A-HTR Heated Polycarbonate Enclosure Thumb Lock
Heated polycarbonate thumb lock, NEMA 4 rated for frozen climates
- Built-in heating maintains operation in freezing conditions for year-round access
- Polycarbonate enclosure with NEMA 4 rating withstands wet, corrosive, dusty sites
- Thumb lock activation integrates into standard door frame security installations
$258.50 $172.99 Save $85.51The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7511D
STI STI-7511D Polycarbonate Surface-Mount Lock/Strike Enclosure
Surface-mount polycarbonate enclosure for strike and reader retrofit
- No recessing required—installs directly to frames without structural cuts
- Polycarbonate housing resists impact, UV, and moisture in interior/covered exterior
- Open conduit back box supports 24VDC fail-secure and 12VDC fail-safe wiring
$81.74 $80.99 Save $0.75The item has been added -
STI
SKU: STI-7511F-HTR
STI STI-7511F-HTR Heated Polycarbonate Enclosure
- NEMA 4X polycarbonate shell seals out water, dust, and salt spray in outdoor deployments.
- Integrated heating element prevents sub-freezing damage to readers, strikes, and control boards.
- Accepts 12, 16.5, or 24 VAC/VDC input, matching most commercial access control supply voltages.
$258.50 $257.99 Save $0.51The item has been added -
STI
SKU: STI-7515A
STI STI-7515A Access Control Housing
- Dedicated lock/strike housing simplifies strike mechanism deployment in access control installs.
- Pre-marked hole locations streamline door frame modifications and electrical routing planning.
- Compatible with standard commercial lock/strike configurations for hardwired strike activation.
$148.05 $147.99 Save $0.06The item has been added -
STI
SKU: STI-7515F
STI STI-7515F Access Control Housing
- 94V-2 rated polycarbonate resists impact while keeping the protected device visible.
- Operates from -40°C to +121°C, covering outdoor and unheated industrial installs.
- Ships with mounting hardware and gaskets; integrates with STI-7510/7511 housings.
$148.05 $147.99 Save $0.06The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-7520-HTR
STI STI-7520-HTR Heated Type 4X Polycarbonate Enclosure
Heated NEMA 4X polycarbonate enclosure for outdoor access control in cold climates
- Integrated heating element with thermostat maintains operation in sub-freezing temperatures
- NEMA 4X rating resists dust, rain, salt-air corrosion for coastal and washdown environments
- Impact-resistant polycarbonate with optical transparency enables visual monitoring without opening
$305.50 $185.99 Save $119.51The item has been added -
STI
SKU: STI-7520-OWHTR
STI STI-7520-OWHTR Heated Type 4X Protective Cabinet
- NEMA 4X polycarbonate housing protects outdoor readers down to −40°F.
- Integrated radiant heater runs on 12, 16.5, or 24 VAC/VDC power supplies.
- Three-thermostat system includes overheat cutoff and audible warning alert.
$364.25 $240.99 Save $123.26The item has been added -
STI
SKU: STI-7520OB
STI STI-7520OB Protective Cabinet with Open Backbox and Key Lock
Key-lock protective cabinet with open backbox for access control hardware
- Open backbox design accommodates flexible wiring and component placement
- Key lock security mechanism protects mounted readers and strike plates
- Wall-mounted enclosure for entry points and controlled access zones
$173.11 $172.99 Save $0.12The item has been added -
STI
SKU: STI-7521-HTR
STI STI-7521-HTR Heated Type 4X Polycarbonate Thumb Lock Enclosure
NEMA 4X heated polycarbonate enclosure with thumb lock for frozen climates
- Integrated thermostat-controlled heating prevents condensation and ice formation
- NEMA 4 rating with IP59 sealing stops water, dust, and weather ingress
- Thumb lock strike provides mechanical backup on outdoor access control doors
$305.50 $186.99 Save $118.51The item has been added -
STI
SKU: STI-7535
STI STI-7535 Protective Cabinet with Siren/Strobe Alarm Thumb
- UV-stabilised polycarbonate housing provides transparent visibility while blocking vandal access.
- Integrated 100dB siren/strobe alarm delivers immediate audible and visual tamper detection.
- Single 9V battery powers the standalone unit — no network or AC wiring required.
$413.02 $252.99 Save $160.03The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.