Covers & Protection
Sub categories
Showing Results for Covers & Protection
-
Add to Cart The item has been addedSTI
SKU: STI-6518
STI STI-6518 Bopper Stopper® Reader with Spring Loaded Hinge
Dual fingerprint + PIN reader with spring-loaded hinge rated 50,000+ cycles
- Biometric fingerprint and numeric PIN in one door-mounted unit
- Spring-loaded mechanism maintains consistent actuation across high-traffic use
- Configurable single-factor or multi-factor authentication modes
$37.53 $36.99 Save $0.54The item has been added -
STI
SKU: STI-6518-FR
STI STI-6518-FR Bopper Stopper Reader with Spring Loaded Hinge
Fingerprint + PIN biometric reader with spring-loaded hinge for access control
- Hybrid authentication combines fingerprint biometric scanning with PIN keypad entry
- TCP/IP network communication integrates into distributed control systems without dedicated wiring
- Spring-loaded hinge design simplifies mounting and adjustment in standard panel installations
$37.53 $36.99 Save $0.54The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-6519
STI STI-6519 Single-Gang Protective Cover
- Impact-resistant polycarbonate guards keypads and biometric readers from vandalism.
- Rated for −40°F to 250°F, supporting reliable indoor and outdoor deployments.
- Fits standard single-gang footprints without obstructing reader signal or enrollment.
$29.38 $28.99 Save $0.39The item has been added -
STI
SKU: STI-6519-FR
STI STI-6519-FR Single-Gang Protective Cover
Single-gang protective cover for networked access control at 9VDC
- TCP/IP communication integrates with access control systems over standard network infrastructure
- Wall plate/door frame mount fits single-gang installations in standard electrical openings
- 9VDC operating voltage compatible with common 12VDC and 24VDC regulated power supplies
$29.38 $28.99 Save $0.39The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-6520-C
STI STI-6520-C Bio Protector Identification Reader Cover
Protective cover for biometric fingerprint readers in outdoor and high-traffic access control
- Shields fingerprint sensors from dust, moisture, and oils to reduce cleaning cycles and maintain enrollment accuracy
- Compatible with HID credentials (proximity, smart card, mobile) across TCP/IP and RS-232 deployments
- Retrofit mounts on existing STI biometric and keypad readers without firmware changes or reconfiguration
$31.94 $30.99 Save $0.95The item has been added -
STI
SKU: STI-6521-C
STI STI-6521-C Bopper Stopper Keyless Lock Reader
Multimodal reader with fingerprint, keypad, and HID for flexible access
- Fingerprint biometric + keypad + HID credential support in one reader
- TCP/IP and RS-232 connectivity for existing networked access systems
- Wired installation with integrated power and data, multiple auth policies per door
$34.48 $33.99 Save $0.49The item has been added -
STI
SKU: STI-6522-C
STI STI-6522-C Bopper Stopper Clear Biometric Keypad Reader
Fingerprint + keypad reader with clear housing and dual authentication
- Dual-mode authentication combining fingerprint recognition with keypad entry
- TCP/IP and RS-232 connectivity for integration into HID-based access control
- Clear polycarbonate housing allows visual inspection of status and components
$39.86 $38.99 Save $0.87The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-6529
STI STI-6529 Large Protective Cover - Clear
- Polycarbonate shell with torsion spring hinge protects biometric and keypad readers outdoors.
- Rated −40°F to 250°F, supporting deployment in harsh cold-climate or high-heat environments.
- Included mounting screws and foam gasket enable weatherproof install with no device modification.
$77.99The item has been added -
STI
SKU: STI-6552
STI STI-6552 Weather Gasket for Widebody Keypad Protector
- Seals widebody keypad protector frames against moisture, dust, and salt spray.
- Fits existing widebody protector fixing holes — no drilling or special tools needed.
- Rated for outdoor use, protecting 9VDC keypad assemblies in direct rain or coastal environments.
$10.81 $9.99 Save $0.82The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-6580
STI STI-6580 12-Volt Heater Kit
9VDC heater for STI locks & strikes in cold climates
- 9VDC operation integrates with standard access control power rails
- Compact retrofit design fits existing strike box housings
- Prevents frost buildup in solenoid cavities and striker plungers
$117.50 $116.99 Save $0.51The item has been added -
STI
SKU: STI-6582
STI STI-6582 Mounting Backplate for Widebody Keypad Protector
- Provides rigid mechanical foundation for widebody keypad protector installations.
- Operates at 9V DC, aligning with standard access control power architectures.
- Four fixing holes and 7mm masonry drill compatibility simplify concrete wall mounting.
$22.33 $21.99 Save $0.34The item has been added -
STI
SKU: STI-6583
STI STI-6583 24-Volt Heater Kit
- Runs on 24VDC to integrate directly with standard access control panel aux outputs.
- Prevents solenoid lag and mechanical binding in strikes exposed to cold environments.
- Stainless steel construction suits corrosive outdoor and loading dock deployments.
$96.35 $95.99 Save $0.36The item has been added -
STI
SKU: STI-6700
STI STI-6700 Break Glass Stopper Keys Under Glass
Under-glass break stopper key for manual emergency access override
- Mechanical failsafe operation independent of electronic systems
- Mounts under glass in STI emergency access enclosures
- Compliant with life safety codes for emergency egress requirements
$54.05 $53.99 Save $0.06The item has been added -
Add to Cart The item has been addedSTI
SKU: STI-6720
STI STI-6720 Break Glass Stopper Keys Under Plexiglas
- Plexiglas cover keeps emergency keys visible yet deters unauthorized removal.
- Passive mechanical housing requires no power, wiring, or system integration.
- Ships with complete wall-mounting fix kit; replacement glass available via KIT-672.
$44.65 $43.99 Save $0.66The item has been added -
STI
SKU: STI-6931
STI STI-6931 Call Point Stopper Surface Mount Lock
Surface mount strike for access control & secure entry doors
- Clear polycarbonate housing allows visual switch confirmation without removing the cover.
- Surface mounts to any wall via two 5mm masonry holes using included rawl plugs and screws.
- Hinged stainless steel torsion spring keeps cover closed, blocking accidental switch activation.
$72.99The item has been added -
STI
SKU: STI-6931-W
STI STI-6931-W Call Point Stopper White Surface Mount
Surface mount call point with NFC credential authentication for access control
- HID proximity reader operates on NFC/13.56MHz for seamless credential verification
- Compact 6 x 1.5 inch white housing mounts directly to walls and frames
- Single endpoint combines call point activation with credential-based access authentication
$77.99The item has been added
Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Covers & Protection — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 250 working models of covers & protection sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 2MP, 20MP+, 6MP |
| IP Rating | IP66 |
| Connectivity | Wired |
| Power | PoE+, PoE |
| Type | Lock/Strike, Intercom, Controller, Accessory, Reader, Printer, Dome, Thermal |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.