Covers & Protection
Covers and protective enclosures safeguard cameras, intercom devices, and other security equipment from weather exposure, tampering, and accidental damage. Proper protection extends device lifespan and helps maintain consistent system performance in demanding environments.
Plan Your Deployment
- Indoor vs outdoor exposure and weather rating requirements
- Vandal-resistant and impact protection needs
- Compatibility with specific device models
- Mounting method and clearance considerations
- Maintenance access and long-term durability planning
Sub categories
Showing Results for Covers & Protection
-
Pelco
SKU: HPV42K2A016
Pelco HPV42K2A016 VERSO 420mm Housing Heater Blower
420mm VERSO housing with integrated heater, blower, sun shield for extreme temps
- 24 Vac powered thermal management—heater for winter, blower for humidity control
- 420mm length fits larger camera and lens assemblies with IP66/IP67 rating
- Integrated sun shield reduces thermal stress and lens fogging in harsh outdoor climates
Special Order · Ships in 2-3 weeks$286.81 $218.99 Save $67.82The item has been added -
Pelco
SKU: HPV42K2A017
Pelco HPV42K2A017 VERSO 420mm Housing Heater Blower
420mm outdoor housing with integrated heater, blower, and sun shield
- 12 Vdc power input for battery and solar-powered remote installations
- IP66/IP67 rated with IK10 impact resistance for harsh environments
- Thermal management system protects cameras across extreme temperature ranges
Special Order · Ships in 2-3 weeks$286.81 $218.99 Save $67.82The item has been added -
Pelco
SKU: HPV42K2A160
Pelco HPV42K2A160 VERSO POLAR 420mm Camera Housing
Extreme cold housing with integrated heater for below −30°C deployment
- 420mm length accommodates longer camera and lens assemblies
- Integrated sun shield and heater maintain operating temperature in arctic climates
- IP66/IP67 rated; accepts 12 Vdc or 24 Vac power input
Special Order · Ships in 2-3 weeks$241.45 $184.99 Save $56.46The item has been added -
Pelco
SKU: HPV42K2A700
Pelco HPV42K2A700 VERSO Integrated PoE Housing
Outdoor PoE housing with integrated power module for VERSO cameras
- Single Ethernet cable connection eliminates external power supplies
- IP66/IP67 rated construction with IK10 impact resistance for outdoor use
- Integrated PoE+ (802.3at) input powers housed cameras directly
Special Order · Ships in 2-3 weeks$366.85 $279.99 Save $86.86The item has been added -
Pelco
SKU: HPV42K2A716
Pelco HPV42K2A716 VERSO PoE Camera Housing
PoE camera housing with integrated blower for outdoor condensation control
- Single-cable PoE+ deployment eliminates separate AC wiring to the enclosure
- Internal blower manages moisture and heat in humid or thermally variable climates
- IP66/IP67-rated VERSO enclosure with IK10 impact resistance for harsh environments
Special Order · Ships in 2-3 weeks$413.54 $315.99 Save $97.55The item has been added -
Pelco
SKU: HTG37K1A000
Pelco HTG37K1A000 Camera Housing 365mm Heater
365mm outdoor housing with dual-voltage heater for box cameras
- Internal heating element supports 120/230 Vac for climate control
- Integrated sun shield with thermal management reduces glare and heat
- IP66/IP67 rated for direct sun, rain, and temperature extremes
Special Order · Ships in 2-3 weeks$1,558.11 $1,187.99 Save $370.12The item has been added -
Pelco
SKU: HTG37K2A000
Pelco HTG37K2A000 Camera Housing 365mm Heater
365mm outdoor housing with integrated heater for low-voltage camera installations
- 12 Vdc or 24 Vac dual-voltage power input eliminates AC mains wiring needs
- Internal heater maintains performance in cold climates and prevents condensation
- Sun shield reduces thermal load and glare for extended optics lifespan
Special Order · Ships in 2-3 weeks$1,558.11 $1,187.99 Save $370.12The item has been added -
Pelco
SKU: HTV32K2A190_SWI
Pelco HTV32K2A190_SWI VERSO Housing Germanium Glass
Thermal imaging housing with germanium glass and integrated power management
- Germanium optic window optimized for far-infrared thermal camera transmission
- IP66 rated with dual power input: 12–28 Vdc or 24 Vac for outdoor deployment
- Integrated Intelligent Power Module manages heater, blower, and camera electronics
Special Order · Ships in 2-3 weeks$1,770.00 $1,226.99 Save $543.01The item has been added -
Pelco
SKU: IMD1-INCLD0
Pelco IMD1-INCLD0 Smoked Lower Dome for Sarix
Smoked lower dome for Sarix ceiling cameras; obscures lens orientation
- Smoked tint hides sensor aiming angle from below; prevents blind-spot detection
- PoE++ powered; integrates directly with Sarix multi-directional in-ceiling systems
- IK10 vandal rated; trade-off reduces IR range and low-light sensitivity vs. clear dome
Special Order · Ships in 2-3 weeks$79.49 $64.99 Save $14.50The item has been added -
Add to Cart The item has been addedPelco
SKU: IMD1-INCLD1
Pelco IMD1-INCLD1 Clear Lower Dome for Sarix Multi-Directional Cameras
Clear polycarbonate lower dome for Sarix multi-directional cameras
- IK10 vandal rating withstands 20J impact in high-traffic areas
- IR-optimized at 850nm for full night vision range without tint loss
- Fits Pelco Sarix in-ceiling camera systems with maximum light transmission
In stock · Ships same business day$79.49 $64.99 Save $14.50The item has been added -
Add to Cart The item has been added
Pelco
SKU: IMD1-SPLD0 RB
Pelco IMD1-SPLD0 RB Smoked Dome Replacement
Smoked dome replacement for Pelco Sarix Multi with IR pass-through
- IK09 impact-rated smoked polycarbonate obscures lens direction
- Maintains IR transmission for 24/7 night vision operation
- Genuine OEM part for Sarix Multi surface and pendant mounts
In stock · Ships same business day$186.34 $146.99 Save $39.35The item has been added -
Add to Cart The item has been addedPelco
SKU: IMD1-SPLD0
Pelco IMD1-SPLD0 Smoked Dome Sarix Multi Pendant
Smoked dome for Sarix Multi pendant cameras with IK10 vandal rating
- Amber-tinted polycarbonate obscures sensor direction while maintaining IR transmission
- IK10 rating withstands 5 kg steel ball drops from 1.25 m without penetration
- PoE++ powered; compatible with Pelco Sarix Multi surface-mount and pendant models
In stock · Ships same business day$180.12 $146.99 Save $33.13The item has been added -
Add to Cart The item has been addedPelco
SKU: IMD1-SPLD1
Pelco IMD1-SPLD1 Clear Dome for Sarix Multi Surface Cameras
Clear dome for Sarix Multi Pro cameras; IK10 rated, max IR pass-through
- IK10 vandal rating withstands 20-joule direct impact without cracking
- Optical-grade clear dome maximizes 850nm IR transmission for night imaging
- Works with 1/2.8" CMOS sensor; supports 0.018 lux low-light performance
In stock · Ships same business day$175.72 $146.99 Save $28.73The item has been added -
Pelco
SKU: IMF-LD1
Pelco IMF-LD1 Clear Lower Dome 3-Pack
Clear replacement dome 3-pack for Pelco IMF fisheye cameras
- Optical-grade dome transmits visible light and infrared for 24/7 panoramic coverage
- 3-pack enables scheduled maintenance and emergency replacement on 360° systems
- Compatible with Pelco IMF Series fisheye camera systems
Special Order · Ships in 2-3 weeks$110.19 $83.99 Save $26.20The item has been added -
Pelco
SKU: LD-SP8-CLR
Pelco LD-SP8-CLR Clear Dome Bubble for SPDE8
Clear replacement dome for Pelco SPDE8 PTZ cameras with full IR transmission
- Optical-grade clear material maintains image clarity and infrared performance
- Designed as scheduled maintenance consumable for SPDE8-series deployments
- Compatible with Pelco SPDE8 PTZ dome camera systems only
Special Order · Ships in 2-3 weeks$80.00 $60.99 Save $19.01The item has been added -
Pelco
SKU: LD7AF-1
Pelco LD7AF-1 Spectra 7 4K Clear Dome Bubble
Clear acrylic dome replacement for Spectra 7 4K indoor pendant
- Clear acrylic construction maintains visible and infrared light transmission
- White pendant trim matches Spectra 7 4K indoor installations
- Direct replacement for scratched, crazed, or damaged dome bubbles
Special Order · Ships in 2-3 weeks$318.32 $242.99 Save $75.33The item has been added