Hanwha · SPB-MDC41

Hanwha SPB-MDC41 Tinted Dome Cover

Tinted dome cover for Hanwha multi-sensor PTZ cameras with glare reduction

• 315mm tinted polycarbonate dome with light smoked finish reduces reflections

Hanwha · SPB-MDC41V

Hanwha SPB-MDC41V Smoke Dome Cover

Smoked dome cover cuts glare in high-sun surveillance deployments

• Transparent smoked polycarbonate lens reduces reflection without optical distortion
• TR20 screw mount for direct fit on Hanwha multi-sensor camera platforms
• IP66-rated aluminum base with white finish for outdoor dust and spray resistance

Hanwha · SPB-PTZ6

Hanwha SPB-PTZ6 Smoked Dome Cover

Smoked dome cover for 13 Hanwha PTZ and dome camera models

• Smoked polycarbonate reduces glare and reflections while maintaining image quality
• Compatible with XNP, QNP, SNP, SNP-L, and SCP series Hanwha cameras
• Shields cameras from dust, debris, and minor impacts in indoor spaces

Hanwha · SPB-PTZ73

Hanwha SPB-PTZ73 Smoked Dome Cover

Smoked dome cover for XNP-6120H PTZ cameras with glare reduction

• Impact-resistant polymer construction withstands environmental stress and vandalism attempts
• Smoked tint reduces glare and reflections while maintaining image clarity
• Quick-install design enables rapid replacement with minimal surveillance downtime

Hanwha · SPB-PTZ82W

Hanwha SPB-PTZ82W Smoke Dome Cover for PTZ Cameras

Smoked polycarbonate dome cover for QNP-6320H and QNP-6250H PTZ

• Impact-resistant polycarbonate won't shatter under accidental contact
• Smoked tint reduces glare while maintaining 2MP optical clarity
• Precision fit for 32x and 25x optical zoom PTZ models only

Hanwha · SPB-PTZ85W

Hanwha SPB-PTZ85W Tinted Dome Bubble for PTZ Cameras

Tinted dome bubble for Hanwha PTZ cameras with 200x impact resistance

• Tinted polycarbonate obscures pan/tilt movement and deters tampering attempts
• 200x more impact-resistant than glass; withstands vandalism without shattering
• UV-resistant material prevents yellowing and optical degradation over 24+ months

Hanwha · SPB-PTZ95W

Hanwha SPB-PTZ95W Polycarbonate Smoke Dome Cover for PTZ Cameras

Polycarbonate dome cover for Hanwha 31x PTZ cameras in smoky/dusty environments

• 88–92% light transmission maintains image clarity across full zoom range
• Polycarbonate resists yellowing and crazing for long-term outdoor durability
• TR20 screw mount fits ceiling or wall installation on XNP-C7310R and XNP-C9310R

Hanwha · SPB-VAN11

Hanwha SPB-VAN11 Smoked Dome Cover

Smoked dome cover with glare reduction and IP66 weather protection

• IP66-rated weather-resistant composite shields cameras from dust and debris
• Smoked design reduces glare and reflections for clearer video capture
• Compatible with wide range of indoor and outdoor surveillance cameras

Hanwha · SPB-VAN81

Hanwha SPB-VAN81 Smoked Dome Cover

Smoked dome cover with tinted lens to cut glare on Hanwha cameras

• Tinted optics reduce glare and reflections for consistent image clarity
• High-quality construction shields against dust, debris, and weather exposure
• Fits multiple Hanwha camera models for flexible system integration

Hanwha · SPB-VAN82W

Hanwha SPB-VAN82W Smoked Dome Cover for Q AI Vandal

Smoked polycarbonate dome cover for Q AI vandal cameras

• Transparent smoked dome obscures lens position; maintains full IR pass-through
• Aluminum base (RAL 9003 white) resists corrosion and fingerprints outdoors
• Fits QNV-C6083R, QNV-C8083R, QNV-C9083R via TR20 screw interface

Hanwha · SPB-VAN85W

Hanwha SPB-VAN85W Tinted Dome Bubble

Tinted dome bubble with IP67 protection for discreet camera mounting

• Smoked polycarbonate bubble obscures camera direction from view
• IP67/IP66 rated aluminum and PC construction handles indoor/outdoor use
• Compact Ø178 x 92mm design at 380g fits Hanwha XNV and PNV cameras

Hanwha · SPB-VAN87W

Hanwha SPB-VAN87W Smoked Dome Cover for Vandal Cameras

Hard-coated smoked dome for vandal cameras with IR transparency

• Polycarbonate bubble with aluminum ring, IP66/IP67 rated for outdoor
• Scratch-resistant hard coating reduces glare without blocking IR at night
• Fits PNV-A7082RZ and PNV-A9082RZ vandal dome cameras

Hanwha · SPB-VAN88W

Hanwha SPB-VAN88W Tinted Bubble Dome

IP67 tinted dome for Wisenet X Core outdoor vandal cameras

• Transparent smoked glass reduces glare while maintaining optical clarity
• IP67 weatherproof rating handles dust and high-pressure water jets
• Aluminum base with white finish, 160×118mm compact footprint, 400g

Hanwha · SPB-VAN89W

Hanwha SPB-VAN89W Tinted Bubble Dome Cover

Smoke-tinted dome cover with UV protection for Wisenet X Plus PTRZ cameras

• Hard-coated polycarbonate dome with transparent smoke tint reduces glare and glint
• Aluminum frame + polycarbonate construction rated for outdoor environments
• Compact 177mm diameter, 350g weight fits five compatible Wisenet X Plus models

Hanwha · SPB-VAW72

Hanwha SPB-VAW72 Tinted Dome Cover for Wisenet Cameras

Tinted dome cover for Wisenet cameras—obscures lens aim while maintaining clarity

• Transparent smoked glass hides camera direction without degrading image quality
• IP66 rated aluminum construction resists dust, rain, and UV in outdoor mounting
• Fits QNV-6072R/6073R/6082R/6083R/8080R at just 229g—no reinforced brackets needed

Hanwha · SPF-BCB0

Hanwha SPF-BCB0 Clear Front Cover

Replacement or additional clear front cover designed for recessed and rack-mount camera installations

• Clear front cover for Hanwha recessed dome cameras
• Polycarbonate/acrylic material with full light transmission
• Drop-in field-replaceable for service workflows

Hanwha · SPF-BDB0

Hanwha SPF-BDB0 Diffusion Front Cover

N optical accessory designed to eliminate glare and improve image uniformity in 1MP camera installations

• Diffusion front cover for Hanwha 1MP compact cameras
• Scatters incident light to eliminate glare artifacts
• Improves backlit and front-lit detail visibility

Hanwha · SPF-BPB0

Hanwha SPF-BPB0 Polarized Front Cover

Polarized optical front cover designed to eliminate glare and reflections that degrade image quality in direct-sunlight or high-contrast outdoor

• Polarized front cover for Hanwha cameras
• Reduces glare from water, glass, and polished surfaces
• Drop-in cover improves contrast in backlit outdoor scenes

Hanwha · SPG-IND72B

Hanwha SPG-IND72B Dome Cover, Black

Black dome cover for Hanwha QND-6070R and QND-7080R cameras

• Lightweight 0.70 lb design mounts easily on compatible surveillance models
• High-quality durable construction shields cameras from dust, moisture, and debris
• Compact 5.43 x 5.43 x 3.54 inch profile fits discreetly in any environment

Hanwha · SPG-VAN13W

Hanwha SPG-VAN13W Dome Cover

IP66 dome cover with optical clarity for weatherproof camera protection

• Optically transparent material preserves video sharpness without reflections
• IP66 & IK10 rated for rain, snow, dust, and impact resistance
• Tool-free mounting included; fits SLA-2M and SPM-4210 models

Hanwha · SBP-FCD85W

Hanwha Tinted Bubble FOR Indoor Flush Mount X-plus - SBP-FCD85W

When deploying Hanwha X-plus dome cameras in finished interior spaces, the standard clear bubble can draw unwanted attention or clash with design

• Tinted dome cover for X-plus series flush-mount cameras
• Reduces camera visibility while preserving image quality
• Drop-in field-replaceable for service workflows

Hanwha · TRTN-CAGE

Hanwha TRTN-CAGE Protective Sensor Cage

Tamper-proof steel cage for Hanwha Triton vape and safety sensors

• Steel construction shields Ultra sensors from unauthorized access and damage
• Compatible with PoE+ powered Triton sensor models TRTN-PR001, TRTN-UA001, TRTN-VD001
• Lightweight 0.52 lb design maintains full sensor functionality while preventing removal

Hanwha · FC37-001051A

Hanwha Window-quad CAM_PNM-9320VP

Factory-spec window assembly for the PNM-9320VP multi-directional quad camera

Hanwha · XNB-6001/KME

Hanwha XNB-6001/KME WiseNet X Lens Module

N interchangeable lens module designed for the WiseNet X camera platform, enabling operators to adapt optical configurations to site-specific

• WiseNet X interchangeable lens module camera body
• Swap optical modules between compatible camera platforms
• PoE 802.3af with onboard people counting analytics

HES · SMLS

HES SMLS Stainless Steel Surface Mount Lock Housing

Stainless steel surface mount housing for HES electromagnetic locks

• Non-mortise design retrofits into spaces where door modification isn't possible
• Stainless steel construction resists corrosion in moisture-prone environments
• Compatible with HES electromagnetic lock systems using SAM magnet support

HES · SMSS

HES SMSS Surface Mount Strike Housing

Stainless steel surface mount strike for SAM systems, no mortise

• Surface mount design eliminates mortise cavity preparation on door frames
• Stainless steel construction resists corrosion in indoor environments
• Compatible with HES SAM strike systems for retrofit applications

HID · D930181-01

HID D930181-01 DTC4000 DTC4500 Top Cover

Protective top cover for DTC4000 and DTC4500 card printers

• Polymer composite shell shields DTC4000/DTC4500 internals from dust and debris.
• Rack mount design integrates directly into multi-door access control deployments.
• 2-year manufacturer warranty covers the unit for extended installation lifecycles.

HID · D930181-03

HID D930181-03 DTC1250e FD Top Cover

Protective top cover assembly for HID DTC1250e card printers

• Shields DTC1250e print head and ribbon from dust, extending maintenance intervals.
• Weighs 0.25 lb; removes quickly for card loading without disrupting rack footprint.
• Rated for 65–80°F operation, matching DTC1250e thermal specs—no reconfiguration needed.

Honeywell · HA35P2L28

Honeywell Commercial Security HA35P2L28 35mm Pin-hole Lens 2MP

35mm pin-hole lens for 2MP covert surveillance in tight spaces

• 35mm focal length delivers tight field-of-view for targeted 2MP covert capture.
• M-mount interface enables straightforward integration into compatible 2MP camera modules.
• Pin-hole form factor supports discrete, space-constrained fixed-mount deployments.

Honeywell · HA35P5L37

Honeywell HA35P5L37 35mm Pin-hole Lens 5MP

35mm pin-hole lens, 5MP, covert surveillance in confined spaces

• 5MP resolution delivers high-definition capture from a compact pin-hole form factor.
• 35mm focal length enables tight framing in confined spaces where standard lenses won't fit.
• Covert pin-hole design conceals the lens barrel, supporting discreet retail and access-point installs.

i-PRO · 3DA003745AZA

i-PRO Clear Dome Cover - 3DA003745AZA

When you need to replace a damaged or scratched dome cover on compatible i-PRO camera housings, downtime and image quality degradation aren't options

• OEM polycarbonate optic restores original image clarity without camera body swap.
• IK08-rated dome withstands vandalism impacts, protecting the sensor and housing seal.
• NDAA-compliant replacement maintains compliance posture on existing i-PRO installations.

i-PRO · WV-QDC506C

i-PRO Clear Dome Cover for SBV131M - WV-QDC506C

Replacement clear dome cover for the i-PRO SBV131M compact dome camera

• Hard-coated polycarbonate restores optical clarity on SBV131M without full camera swap.
• Rated −50 °C to +60 °C, supporting sheltered outdoor and indoor deployments year-round.
• Includes three fixing screws and a new waterproof rubber seal to maintain weatherproof integrity.

i-PRO · WV-CS5C

i-PRO Clear Dome Cover FOR SC588 - WV-CS5C

Factory replacement clear dome cover for the i-PRO WV-SC588 network camera

• Factory replacement dome restores optical clarity on WV-SC588 without full camera swap.
• Field installation takes 10–15 minutes with a standard screwdriver—no specialized tools needed.
• Requires SC588 firmware v1.90 or later; verify before installation to avoid alignment errors.

i-PRO · WV-QDC510C

i-PRO Clear Dome Cover FOR U Series Fixed Dome - WV-QDC510C

Clear replacement dome cover for i-PRO U Series fixed dome cameras

• Clear optical construction preserves full light transmission for accurate daytime and low-light imaging.
• Precise fit for i-PRO U Series fixed domes prevents weatherproofing failure and optical misalignment.
• Compact 91×81×45.5 mm profile allows stocking as a spare to minimize critical-site downtime.

i-PRO · PGVF2178ZAC1

i-PRO Dome Cover Assembly - PGVF2178ZAC1

Factory dome cover assembly for compatible i-PRO / Panasonic dome cameras

• OEM assembly restores published IP and IK ratings after dome damage or wear.
• Optical-grade polymer with anti-reflective interior eliminates IR ghosting post-swap.
• Includes gasket, trim ring, and captive hardware — no firmware or focus changes needed.

i-PRO · PGVF2701ZAC1

i-PRO Dome Cover Assembly - PGVF2701ZAC1

Replacement dome cover assembly for i-PRO indoor dome cameras

• Restores image clarity on damaged i-PRO indoor dome cameras without full unit replacement.
• Hand-tool installation keeps downtime minimal — no specialized torque equipment required.
• Model-specific fit for i-PRO dome series; verify camera model number before ordering.