i-PRO WV-CS5C Clear Dome Cover for SC588
Overview
The WV-CS5C is a factory replacement clear dome cover for the i-PRO WV-SC588 network camera. Install this when the original dome becomes scratched, fogged, or damaged—a common field failure in high-traffic indoor environments where mounting hardware absorbs contact from staff, carts, or cleaning equipment. Replacing the dome cover costs significantly less and takes far less time than swapping the entire camera body, making this the practical choice for maintaining image clarity in active deployments.
Compatibility
The WV-CS5C is engineered to fit the SC588 form factor only. Do not install on other i-PRO camera models or third-party equipment. Firmware version 1.90 or later is required on the SC588 for proper dome cover operation. Verify your camera's driver version before ordering—older firmware versions must be upgraded via the Panasonic security support portal before the dome cover will function correctly. Failure to meet the firmware requirement may result in optical alignment errors or sensor miscalibration.
Installation Notes
Replacement is a straightforward field procedure requiring no specialized tools beyond a standard screwdriver. Disconnect power, unscrew the existing dome from the camera housing, clean the mounting threads to remove dust and debris, and thread the new WV-CS5C dome in place. Allow 10–15 minutes for the procedure. Ensure the camera firmware is at version 1.90 or later before reinstalling to avoid alignment or calibration issues.
What's in the Box
- 1x WV-CS5C clear dome cover
