Hanwha SPB-PTZ82W Smoke Dome Cover for PTZ Cameras
The SPB-PTZ82W is a precision-engineered polycarbonate replacement dome cover for Hanwha IP cameras in the QNP PTZ family. This is a straightforward accessory: if you need to protect, replace, or discretely conceal a PTZ dome on a QNP-6320H or QNP-6250H, the SPB-PTZ82W delivers optical clarity with a smoked tint that maintains video quality while reducing visual prominence in the room.
Key Features
- Impact-Resistant Polycarbonate Material: The SPB-PTZ82W is manufactured from transparent smoked polycarbonate that handles accidental contact without shattering—a real advantage in high-traffic areas or warehouses where cameras sit at arm's reach. Unlike glass, polycarbonate won't fracture under impact, reducing replacement frequency and downtime on busy floors.
- Smoked Tint for Glare Reduction: The tint reduces glare from overhead halogen or LED lighting, which is especially useful in retail environments, conference rooms, or office spaces where bright fixtures can wash out dome imagery. The finish doesn't degrade video quality; optical transmission remains unchanged, so the 2MP resolution of your QNP-6320H or QNP-6250H is unaffected.
- Precision Fit for QNP-6320H and QNP-6250H: This dome is engineered to fit the QNP-6320H (2MP 32x optical PTZ) and QNP-6250H (2MP 25x optical PTZ) only. Do not attempt to force it onto other PTZ models—misalignment will prevent the dome from seating fully, may damage the lens assembly, and will introduce rattle during pan/tilt movement.
- Minimal Weight (310 grams / 0.68 lbs): The lightweight design places negligible stress on your existing wall or ceiling mounts. No need to reinforce brackets, adjust pan/tilt motor tuning, or re-engineer the installation when swapping from a clear dome. Drop-in replacement.
- Compact External Dimensions (Ø196.3 × 107.3 mm): These tight tolerances are manufactured to specification. If you're retrofitting into an existing installation, verify your mount hardware against the original dome dimensions before ordering. The depth of 107.3 mm is critical if your mounting location has spatial constraints (e.g., recessed ceiling or wall penetration).
- Indoor Deployment Only: The SPB-PTZ82W is engineered for controlled indoor environments—offices, retail, warehouses, conference rooms. It is not rated for outdoor weather exposure, direct rain, or temperature extremes. If your QNP PTZ camera needs outdoor protection, evaluate whether the camera itself is rated for that environment (check IP rating on the base camera spec sheet) and select weather-rated housings instead.
When to Use This Accessory
Replacement scenario: Your original dome is scratched, cracked, or fogged from condensation. Protective scenario: You're staging spares on hand for a multi-camera PTZ camera rollout. Discretion scenario: The smoked finish is less obvious than a clear dome in a conference room or executive suite—not invisible, but it doesn't announce 'camera' as bluntly to occupants.
Installation & Compatibility
The dome threads or clips onto the PTZ camera's existing dome mount ring—no tools required beyond a gentle hand and care not to cross-thread. If your QNP-6320H or QNP-6250H is already installed, you can swap the dome cover in place without removing the camera from the wall or ceiling. For new installations, ensure the dome seats fully and locks before powering on the PTZ motor; a loose dome will rattle and throw focus during pan/tilt movement, degrading video during active tracking.
Hanwha PTZ cameras in the 63xx and 62xx series use the same accessory ecosystem. If you're running mixed 32x and 25x models across a facility, stock one or two SPB-PTZ82W covers as spares. Polycarbonate is a consumable—scratches, minor cracks, and UV fade are normal over 5–7 years in office lighting conditions.
Frequently Asked Questions
Q: Will the smoked dome reduce video quality or resolution?
A: No. The polycarbonate is optically transparent; the smoked tint is a light-absorption finish that reduces glare without degrading image quality. The 2MP resolution of the QNP-6320H or QNP-6250H remains unchanged. You may see a slight reduction in overall brightness, but the camera's exposure adjustment will compensate automatically.
Q: Can I use the SPB-PTZ82W on a QNP-6330H or other Hanwha PTZ model?
A: No. The SPB-PTZ82W is precision-fit for the QNP-6320H and QNP-6250H only. Do not attempt to force it onto other models—the mount ring diameter and bayonet locking mechanism are model-specific.
Q: Is this dome suitable for outdoor or humid environments?
A: No. The SPB-PTZ82W is designed for controlled indoor environments. If you need outdoor protection, evaluate the base camera's IP rating and consider weather-sealed housings or outdoor-rated PTZ variants.
Q: How long does the smoked tint last before it fades or degrades?
A: In typical office lighting (no direct sunlight), the tint is stable for 5–7 years. Prolonged direct UV exposure will accelerate fade. Indoor deployments away from windows or skylights experience minimal degradation over the product lifecycle.
Q: Do I need any tools to install the SPB-PTZ82W?
A: No. The dome threads or clips onto the camera mount by hand. Ensure it seats fully before powering on the PTZ motor. No screwdrivers, wrenches, or specialized tools required.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The SPB-PTZ82W is a straightforward consumable accessory—you order it when you need a replacement dome or are building out spares for a QNP-6320H or QNP-6250H deployment. At 310 grams and with tight tolerance Ø196.3 mm dimensions, this cover is designed to integrate seamlessly without stressing your existing PTZ mount infrastructure.
Technical Highlights:
- Impact-Resistant Polycarbonate: Unlike tempered glass, polycarbonate won't shatter under accidental contact. In warehouses or retail environments where head height permits arm's-reach contact with cameras, this translates to fewer emergency replacements and less downtime.
- Smoked Tint Optical Transparency: The 107.3 mm depth and smoked finish reduce overhead glare (especially from halogen or LED fixtures) without degrading the 2MP signal to the sensor. Useful for office or retail deployments where bright fixtures previously washed out dome video. Exposure compensation is automatic—no tuning required.
- Weight (310g / 0.68 lbs) and Mount Compatibility: The lightweight design means your existing QNP-6320H or QNP-6250H PTZ motor, pan/tilt brackets, and power budget remain unchanged. Drop-in replacement with zero infrastructure modifications.
Deployment Considerations:
- Precision Fit—No Cross-Compatibility: The SPB-PTZ82W is engineered for the QNP-6320H (32x PTZ) and QNP-6250H (25x PTZ) only. Attempting to force it onto other Hanwha PTZ models (e.g., QNP-6330H) will result in misalignment, loose seating, and rattle during active movement. Verify your base camera model before ordering.
- Indoor Deployment Only: This is not a weather-rated housing. No IP67 rating, no submersion protection, no temperature-extreme certification. If your QNP PTZ is destined for outdoor or harsh HVAC-exposed installations, confirm the base camera's IP rating first and source a purpose-built weather enclosure instead.
- Consumable Lifecycle: Polycarbonate scratches, may crack under repetitive impact, and will fade under prolonged UV exposure. In typical office lighting (5–7 years), degradation is minimal. In sunlit environments or near skylights, tint fade accelerates. Budget for replacement every 5–7 years depending on deployment.
The SPB-PTZ82W makes the most sense in indoor retail, office, or warehouse deployments where you want to reduce glare and visual camera prominence without compromising video quality. It's a consumable spare—buy one or two extras when you provision your initial QNP PTZ camera set, and you'll have on-hand replacements if a dome gets scratched or cracked.
