Comelit · UT9192

Comelit UT9192 Rainshield Surface-Mounted Wall Housing

Surface-mounted 4MP rainshield housing for outdoor intercom entry points

• PoE+ (802.3at) lets one Ethernet cable carry video and power
• Surface-mount rain shield for 2560x1440 outdoor entrance panels
• Removes separate 12VDC or 24VAC runs at outdoor mount points

Comelit · UT9193

Comelit UT9193 Surface-Mounted Rainshield Wall Housing

Surface-mount rainshield housing for 4MP IP cameras with PoE+ power

• PoE+ (802.3at) eliminates 12VDC runs to outdoor mount locations
• Surface-mount rain shield for 2560x1440 outdoor entrance panels
• Single Cat5e/6 cable carries both video and power on retrofits

Comelit · UT9194

Comelit UT9194 Rainshield Surface-Mounted Wall Housing

Weather-sealed 4MP housing for outdoor wall-mount camera deployments

• Anodised aluminium rain shield for outdoor entrance panel install
• PoE+ (802.3at) compatible mount for 2560x1440 Ultra video panels
• Surface-mount wall housing weatherproofs exterior intercom drops

Comelit · UT9196

Comelit UT9196 Rainshield Surface-Mounted Wall Housing

Surface-mounted rainshield housing for outdoor 4MP PoE+ cameras

• Houses 6 Ultra modules in 2 stacks of 3 side-by-side modules
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
• Wall-mount rain shield for direct exterior surface installation

Comelit · UT9198

Comelit UT9198 Rainshield Surface-Mounted Wall Housing

Weatherproof surface-mounted housing for 4MP PoE+ cameras

• Anodised aluminium rain shield for surface-mount network gear
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
• Wall-mount housing for exposed exterior or indoor lobby placement

Comelit · UT9199

Comelit UT9199 Rainshield Surface-Mounted Wall Housing

Weather-resistant 4MP wall housing with PoE+ for outdoor IP cameras

• Rain shield protects a 9-module Ultra entrance panel outdoors
• Anodised aluminium grey housing for direct exterior surface mount
• PoE+ (802.3at) compatible 2560x1440 panel weather protection

Comelit · UT9305M

Comelit UT9305M Empty Glass Module Housing

4MP empty glass module with PoE+ for third-party camera integration

• PoE+ (802.3at) up to 30W per port over a single PoE+ switch port
• Empty glass module housing for Ultra entrance panel customization
• Single Cat5e/6 cable carries data and power, no AC conduit needed

Digital Watchdog · DWC-DJSSLD

Digital Watchdog DWC-DJSSLD Sun Shield Cover for DJ Domes

Essential protective accessory designed to extend the operational lifespan and maintain image clarity of Digital Watchdog DJ dome cameras in high-sun

• Sun shield cover extends DJ dome camera image clarity outdoors
• Reduces lens heat from direct sunlight in summer deployments
• Snap-on accessory for fast field retrofit on existing domes

Digital Watchdog · DWC-MCBLU

Digital Watchdog DWC-MCBLU Micro Dome Trim Ring Blue

Blue trim ring for Digital Watchdog micro dome cameras

• Tool-free installation with no impact on camera performance
• Fade-resistant polymer construction for indoor and outdoor use
• Professional appearance across retail, corporate, education, healthcare

Digital Watchdog · DWC-MCGRN

Digital Watchdog DWC-MCGRN Micro Dome Trim Ring Green

Green trim ring for Digital Watchdog micro dome cameras

• Tool-free attachment fits Digital Watchdog micro dome models
• Durable construction maintains color and integrity in any environment
• Vibrant green finish for branding and camera identification

Digital Watchdog · DWC-MCRED

Digital Watchdog DWC-MCRED Micro Dome Trim Ring Red

Red trim ring for Digital Watchdog micro dome cameras

• Tool-free installation on compatible Digital Watchdog micro domes
• Vibrant red color for branding, identification, or location coding
• Durable high-quality construction for varied surveillance environments

Digital Watchdog · DWC-PVXLMOD28

Digital Watchdog DWC-PVXLMOD28 2.8mm Lens Module

2.8mm lens module engineered for modular IP camera systems, enabling field-level optical customization without full camera replacement

• 2.8mm wide-angle lens module with ~100-110 degree FOV
• Aluminum vandal housing for high-traffic outdoor zones
• IP66 weather-sealed with polycarbonate dome cover

Digital Watchdog · DWC-PVXLMOD4

Digital Watchdog DWC-PVXLMOD4 4mm Lens Module

4mm interchangeable lens module designed for modular surveillance camera platforms that require field-configurable optics

Digital Watchdog · DWC-PVXLMOD6

Digital Watchdog DWC-PVXLMOD6 6mm Lens Module

6mm fixed focal-length lens module engineered for Digital Watchdog's modular IP camera platforms

• 6mm fixed-focal lens module with 50-degree FOV
• Aluminum vandal housing for impact-prone deployments
• IP66 weather-sealed with polycarbonate dome cover

Digital Watchdog · DWC-PVXLMOD8

Digital Watchdog DWC-PVXLMOD8 8mm Lens Module

N 8mm interchangeable lens module engineered for panomorph ultra-panoramic camera systems

• 8mm wide-angle lens module for Digital Watchdog cameras
• HD 1080p resolution for panoramic single-camera coverage
• Covers parking lots and fence lines without pan/tilt

Digital Watchdog · DWCSP00902436

Digital Watchdog DWCSP00902436 Replacement Top Assembly

Replacement top assembly designed to maintain the integrity and functionality of specific Digital Watchdog surveillance cameras

Digital Watchdog · DW-ILIRIP850

Digital Watchdog High Performance 850nm Infra-red - DW-ILIRIP850

850nm infrared illuminator designed to augment camera systems in low-light and no-light surveillance deployments

Digital Watchdog · DW-ILIRIP940

Digital Watchdog High Performance 940nm Infra-red - DW-ILIRIP940

940nm infrared illuminator designed to extend night vision capability for Digital Watchdog IP surveillance cameras

Digital Watchdog · DW-ILWLIPM

Digital Watchdog High Performance White light - DW-ILWLIPM

White light illuminator accessory designed to augment low-light and nighttime surveillance performance in Digital Watchdog camera deployments

Digital Watchdog · DW-ILHYBIP850

Digital Watchdog Hybrid 850nm Infra-red - DW-ILHYBIP850

N 850nm infrared illuminator module designed to extend nighttime coverage for hybrid surveillance systems that integrate visible and infrared capture

Digital Watchdog · DW-ILHYBIP940

Digital Watchdog Hybrid 940nm Infra-red - DW-ILHYBIP940

940nm hybrid infrared accessory designed to extend night-vision capability on compatible Digital Watchdog surveillance cameras

Digital Watchdog · DWC-INTCAM02

Digital Watchdog MEGApix Intercam Door Station - DWC-INTCAM02

2MP door station designed for entry-point monitoring, visitor verification, and access control integration

Digital Watchdog · DWCSP00902103

Digital Watchdog Top Ass'y for MV82WiATW/MV85WiATW - DWCSP00902103

When a dome camera takes impact damage or suffers housing wear in high-traffic environments, you need field-replaceable components that restore full

• OEM top assembly for MV82WiATW/MV85WiATW multi-sensor cameras
• Factory-matched component maintains weatherproof seals
• NDAA compliant replacement for federal facility cameras

Digital Watchdog · DWCSP05010567

Digital Watchdog TOP Assy MV8TOP Assy MV8 - DWCSP05010567

When a multi-sensor camera housing takes damage in the field, swapping the entire unit means downtime, recalibration, and unnecessary expense

• Replacement top assembly for DW MEGApix MV multi-sensor cameras
• Factory-configured spare preserves base mount and cabling
• NDAA compliant OEM optical module for field repair

DSC · HSM2208

DSC HSM2208 DIN Rail Mount Housing

DIN rail or panel mount housing for DSC security controllers

• DIN rail mount housing for DSC 12VDC modules
• Compatible with backup battery and UPS infrastructure
• Direct-fit cabinet mount for security installations

Epson · C32C814592

Epson C32C814592 T88IV Power Supply Housing Box

Dark gray power supply housing for Epson T88IV thermal receipt printers

• T88IV power supply housing in dark gray metal box
• Protects internal power distribution components
• Direct-fit replacement for TM-T88IV printer

Epson · C32C814611

Epson C32C814611 U220 Power Supply Housing Box

Replacement power supply housing for Epson U220 receipt printers

• U220 power supply housing in cool white finish
• Contains and shields PSU for thermal dissipation
• Direct-fit replacement for receipt printer system

FLIR · CM-CLEAR-32-11

FLIR Clear Bubble for CM-3202 - CM-CLEAR-32-11

Maintaining optical clarity and protecting dome optics in high-traffic environments requires field-replaceable components that don't force you to

• Clear bubble replacement for FLIR CM-3202 dome cameras
• Field-replaceable design avoids full camera RMA
• Optical-grade material preserves image clarity

FLIR · T912379

FLIR T912379 Protective Housings for Automation Cameras

Protective housings for FLIR automation cameras provide robust environmental shielding for thermal imaging systems deployed in industrial and outdoor

• Protective housing for FLIR automation thermal cameras
• Environmental shield for industrial and outdoor deployment
• NDAA compliant for federal facility procurement

Geovision · 150-MT901-VD0

Geovision 150-MT901-VD0 GV-MOUNT901 Dome Housing Pendant Mount

Pendant mount designed for Geovision dome camera housings

• Pendant mount suspends GV-VD series dome housings for clean ceiling drops in corridors and lobbies.
• Interior cable pathway routes PoE cabling through the mount, keeping infrastructure concealed.
• Fixed pendant orientation sets camera angle at install; adjust before final tightening to lock aim.

Geovision · 42-P11SDV2-0L02

Geovision 42-P11SDV2-0L02 SD V2 Cover

Protective SD card slot cover designed for Geovision SD V2 series surveillance equipment

• Direct replacement cover fits Geovision SD V2 series devices with positive retention.
• Shields SD card slot from dust, moisture, and debris to prevent read/write failures.
• Tool-free installation lets field technicians swap the cover without downtime.

Geovision · 51-MT91700-EFD1

Geovision 51-MT91700-EFD1 GV-MOUNT 917 Dome Housing

Protective dome housing designed to enclose and mount Geovision's EFD2101 and EFD3101 dome cameras

• Engineered specifically for EFD2101 and EFD3101 dome cameras ensuring secure fit.
• Supports ceiling and wall mounting to standardize camera positioning across deployments.
• Protective enclosure shields optics from dust and weathering in indoor or outdoor installs.

Geovision · 54-VD12U-K02

Geovision 54-VD12U-K02 VD123 Housing Smoke Cover

Replacement smoke cover housing designed for the VD123 dome camera series

• IK07-rated cover withstands impacts up to 5J on drop-ceiling and wall-bracket installs.
• Direct-fit snap-in replacement for VD123 series domes; no adapters or modifications needed.
• Smoke tint reduces lens glint without measurable light transmission loss or image degradation.

Geovision · 84-EFD2100-0010

Geovision 84-EFD2100-0010 2MP 2.8MM Low Lux Target

2MP interchangeable target module designed to retrofit Geovision EFD series IP cameras in low-light surveillance scenarios

• 2MP 1920×1080 sensor supports facial recognition and license-plate capture.
• 2.8MM fixed lens delivers ~100° FOV for hallways, checkout lanes, and perimeters.
• Drop-in EFD series module reuses existing enclosures and PoE infrastructure.

Geovision · 84-FE34020-001U

Geovision 84-FE34020-001U 3MP 1.19MM Fisheye Lens

3MP fisheye lens module with 1.19mm focal length — a direct replacement or retrofit component for compatible Geovision IP camera systems

• 3MP fisheye at 1.19mm focal length delivers full panoramic coverage from a single mount point.
• Lens-only retrofit installs into compatible Geovision housings without new cabling or reconfiguration.
• Genuine Geovision OEM part (84-FE34020-001U) — verify camera model compatibility before ordering.

Geovision · 84-HOUG101-0001

Geovision 84-HOUG101-0001 Housing Box IP67

N IP67-rated protective enclosure designed to shelter surveillance equipment, junction boxes, PoE injectors, and cable terminations in outdoor and

• IP67 rating seals against dust and 1m submersion, blocking moisture-induced corrosion.
• Houses PoE injectors, surge protectors, and terminal blocks in one weatherproof compartment.
• Consolidated outdoor cable termination reduces field-side RJ45 and power connection failures.