IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Axis

SKU: 02744-001

Axis TS3902 Rail Kit for S3016 Recorder - 02744-001

19-inch rack-mount kit for AXIS S3016 Recorder vertical deployment
- Adjustable rail spacing 376mm to 499mm fits variable rack configurations
- Steel construction with secure fastening for stable vertical rack mounting
- Designed exclusively for AXIS S3016 Recorder integration in data centers
Special Order · Ships in 2-3 weeks

$131.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02269-001

Axis TU1001-VE Compact Outdoor Microphone - 02269-001

IP66 compact outdoor mic with 71.4 dB SNR for networked systems
- Hemispherical pickup captures balanced ambient audio across 20 Hz–20 kHz
- IP66-rated aluminum casing handles –20 °C to 60 °C outdoor conditions
- Ultra-low 0.006 W power draw with 3.5 mm stereo plug connectivity
Special Order · Ships in 2-3 weeks

$184.53 $178.99 Save $5.54

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02082-001

Axis TU1002-VE Professional Microphone Kit - 02082-001

Professional microphone kit for Axis network audio systems
- 74 dB signal-to-noise ratio with 112 dB max SPL for clear audio
- IP66/IK10 rated housing withstands indoor and outdoor conditions
- 20 Hz–20 kHz frequency response captures full audio spectrum
In stock · Ships same business day

$184.53 $178.99 Save $5.54

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02470-021

Axis TU6002 Right-Angle SMA Adaptor 10-Pack - 02470-021

Right-angle SMA adaptors 10-pack for tight-space cable routing
- Male-to-female SMA connectors with 90-degree offset design
- Compatible with Axis TU6004-E and TU6005 plenum-rated cables
- 10 adaptors per pack for medium-scale deployments or maintenance stock
In stock · Ships same business day

$108.24 $104.99 Save $3.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02252-001

Axis TU6004-E 30m Outdoor Pre-Terminated Cable - 02252-001

30m outdoor cable with IP66 rating for Axis F-series modular cameras
- 30-meter length eliminates need for power injectors on long camera runs
- IP66/IP6K9K rated jacket withstands direct water spray and washdown
- 40mm minimum bend radius fits standard conduit and pole routing
In stock · Ships same business day

$108.24 $104.99 Save $3.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02266-001

Axis TU6005 Plenum Network Cable 8m - 02266-001

Plenum-rated 8m cable for surveillance in HVAC spaces and plenums
- UL 910 low-smoke, low-halogen jacket meets fire codes in air-handling areas
- 8 meters reaches between cameras and infrastructure without intermediate splices
- Network-grade shielding reduces EMI for stable surveillance connections
In stock · Ships same business day

$108.24 $104.99 Save $3.25

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02469-021

Axis TU6006 FAKRA Connector Kit 10-Pack - 02469-021

FAKRA connectors for TU6005 plenum cable—10-pack for code-compliant installs
- Plenum fire and smoke rated for suspended ceilings, HVAC plenums, data centers
- FAKRA design supports thousands of mating cycles with minimal signal loss
- 10-pack quantity reduces procurement friction for multi-run deployments
In stock · Ships same business day

$43.29 $41.99 Save $1.30

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02790-001

Axis TU6007-E 8M RF Extension Cable - 02790-001

8M RF extension cable for Axis F-Series modular cameras, IP66/IP67
- SMA to FAKRA connectors rated IP66/IP67 for weather-sealed outdoor use
- 0–3 GHz frequency range with 50-ohm impedance for reliable RF transmission
- Operates -40°C to 75°C in high humidity; compact 3mm diameter for tight routing
Special Order · Ships in 2-3 weeks

$21.64 $20.99 Save $0.65

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02794-021

Axis TU6008 5-PIN Terminal Block Connector 10-Pack - 02794-021

5-PIN terminal block connectors for RS232/RS485 serial systems, 10-pack
- 2.5 mm pitch spacing fits compact installations across Axis devices
- Dual protocol support handles both RS232 and RS485 serial communication
- 10-pack quantity covers multi-device projects and spare inventory needs
Special Order · Ships in 2-3 weeks

$26.79 $25.99 Save $0.80

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02867-004

Axis TU6011 Mains Cable - 02867-004

Genuine Axis mains cable for direct AC power to surveillance devices
- OEM-spec mains power connection for Axis network cameras and devices
- Fixed installation design with stable 24/7 operation in security setups
- Authentic Axis component ensures full compatibility with your existing system
Special Order · Ships in 2-3 weeks

$22.67 $21.99 Save $0.68

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02256-001

Axis TV5901 Control Board Adapter - 02256-001

Control Board Adapter for Axis V5925 PTZ cameras with joystick/keypad input
- Joystick, controller, and keypad interfaces for pan, tilt, zoom control
- Direct compatibility with Axis V5925 PTZ Network Camera
- Quick installation with included mounting hardware
Special Order · Ships in 2-3 weeks

$45.35 $43.99 Save $1.36

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02126-001

Axis TW1100 Tool-Free Clip Mount Attachment - 02126-001

Tool-free clip mount with 360° rotation for Axis body-worn cameras
- Instant attachment and repositioning without tools or fasteners
- 360-degree rotation locks angle for any viewing direction without removal
- High-resilience clip maintains secure hold through running and tactical movement
In stock · Ships same business day

$129.89 $125.99 Save $3.90

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02127-001

Axis TW1101 MOLLE Mount Tactical Accessory - 02127-001

MOLLE mount for Axis body cameras with 360° rotation and quick-release
- Snap-fit locking mechanism secures camera with one-handed quick-release
- 360-degree rotation adjusts field of view for tactical positioning
- Lightweight impact-resistant polymer keeps gear load minimal
Special Order · Ships in 2-3 weeks

$83.49 $80.99 Save $2.50

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02129-001

Axis TW1103 Chest Harness Mount - 02129-001

Chest harness mount for hands-free Axis body camera operation
- Adjustable straps accommodate variable body sizes for secure fit
- Complete kit includes harness, straps, and mounting hardware
- Ergonomic chest position keeps camera stable during active work
Special Order · Ships in 2-3 weeks

$217.52 $210.99 Save $6.53

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02689-001

Axis TW1106 Magnet Mount Body Worn Camera 5-Pack - 02689-001

Magnetic mount for AXIS W110 body camera—quick attach/detach on fabric
- Attaches magnetically to uniforms and tactical gear without adhesives or fasteners
- 5-pack quantity supports multi-officer deployments or equipment sharing across shifts
- Lightweight 0.34 lb design minimizes wearer burden during extended field operations
In stock · Ships same business day

$141.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02690-001

Axis TW1107 Magnet Mount Accessory - 02690-001

Magnetic mount for Axis cameras—tool-free positioning without surface damage
- Strong magnetic grip holds cameras securely across varied surfaces without tools
- Vibration-resistant design maintains stable positioning in dynamic environments
- Compatible with most Axis cameras equipped for magnetic mounting capability
Special Order · Ships in 2-3 weeks

$174.22 $168.99 Save $5.23

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Axis TS3902 Rail Kit for S3016 Recorder - 02744-001

Axis TU1001-VE Compact Outdoor Microphone - 02269-001

Axis TU1002-VE Professional Microphone Kit - 02082-001

Axis TU6002 Right-Angle SMA Adaptor 10-Pack - 02470-021

Axis TU6004-E 30m Outdoor Pre-Terminated Cable - 02252-001

Axis TU6005 Plenum Network Cable 8m - 02266-001

Axis TU6006 FAKRA Connector Kit 10-Pack - 02469-021

Axis TU6007-E 8M RF Extension Cable - 02790-001

Axis TU6008 5-PIN Terminal Block Connector 10-Pack - 02794-021

Axis TU6011 Mains Cable - 02867-004

Axis TV5901 Control Board Adapter - 02256-001

Axis TW1100 Tool-Free Clip Mount Attachment - 02126-001

Axis TW1101 MOLLE Mount Tactical Accessory - 02127-001

Axis TW1103 Chest Harness Mount - 02129-001

Axis TW1106 Magnet Mount Body Worn Camera 5-Pack - 02689-001

Axis TW1107 Magnet Mount Accessory - 02690-001

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading