IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
Altronix

SKU: TROVE3MBK3

Altronix TROVE3MBK3 Access Control Enclosure With TM3B Backplane

Modular access control enclosure with TM3B backplane for multi-door systems
- TM3B backplane compatibility supports modular controller card configurations
- Enclosure form factor for centralized or distributed mounting in enterprise deployments
- Accommodates multiple controller cards and interface modules for system expansion
Special Order · Ships in 2-3 weeks

$3,222.22 $1,820.99 Save $1,401.23

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE3SH3

Altronix TROVE3SH3 Access Control Enclosure with TSH3 Backplane

Modular access control enclosure with integrated backplane for mid-scale deployments
- TROVE3 enclosure with factory-integrated TSH3 backplane reduces field assembly time
- Wall or DIN rail mounting supports flexible installation in diverse facility layouts
- Modular design accommodates multiple controller and power module configurations
Special Order · Ships in 2-3 weeks

$1,711.13 $966.99 Save $744.14

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE3SS3

Altronix TROVE3SS3 Trove3 w/TSS3 Backplane

Lenel-S2 certified enclosure with modular backplane for distributed access control
- Consolidated power distribution across multiple access control devices with battery backup
- Modular backplane architecture reduces field wiring and simplifies system integration
- Supervised circuit operation with fault detection and wall-mount form factor
Special Order · Ships in 2-3 weeks

$1,937.30 $1,094.99 Save $842.31

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE3SWC

Altronix TROVE3SWC Side-Mount Battery Cabinet

Side-mount battery cabinet for TROVE3 security power systems
- Houses battery backup and wire management in compact wall-mount form
- Supports modular battery configurations for customized backup capacity
- Indoor enclosure integrates with access control and surveillance systems
Special Order · Ships in 2-3 weeks

$762.59 $430.99 Save $331.60

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE3V3

Altronix TROVE3V3 Access Control Integration Enclosure

Modular access control enclosure with integrated power for HID-Vertx systems
- Backplane architecture supports multiple control cards and power modules in single 19-inch rack or wall mount
- Consolidated power distribution manages door controllers, readers, locks, and auxiliary devices
- Upgradeable card slots scale system capacity without external rewiring
Special Order · Ships in 2-3 weeks

$1,667.19 $942.99 Save $724.20

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01469-001

Axis 01469-001 5MP 8-50mm F1.6 P-Iris Verifocal Lens

5MP 8–50mm zoom lens with F1.6 aperture and P-Iris for variable lighting
- 6.25x optical zoom (8–50mm) captures wide overview and distant detail without repositioning
- F1.6 aperture gathers 2–3 stops more light for low-lux performance without noise
- P-Iris auto-adjusts iris to maintain consistent exposure and depth of field across lighting changes
In stock · Ships same business day

$273.19 $264.99 Save $8.20

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01491-001

Axis 01491-001 Surveillance Card 128GB microSDXC

128GB microSDXC for Axis cameras with 48–72hr continuous recording
- Purpose-built for 24/7 surveillance; handles thermal and write-cycle stress
- Real-time health monitoring alerts you to card wear and available space
- Includes SD adapter; 3-year warranty covers edge recording deployments
In stock · Ships same business day

$62.88 $60.99 Save $1.89

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01570-001

Axis 01570-001 Stainless Steel Pole Mount

316L stainless steel pole mount for coastal and salt-spray environments
- 1.4404/316L stainless steel resists corrosion in harsh outdoor conditions
- Adjustable pole-mount height for flexible camera positioning and sight lines
- Complete hardware kit included; compatible with Axis Wall Mount Excam XF
Special Order · Ships in 2-3 weeks

$1,296.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01678-001

Axis 01678-001 Surveillance Card 128GB microSDXC 10-Pack

128GB microSDXC 10-pack for Axis cameras with health monitoring
- 1.28TB total capacity; 8–12 hours 1080p recording per card
- High-endurance design sustains 24/7 sequential writes without throttling
- Real-time card health status monitoring for predictive maintenance
In stock · Ships same business day

$629.00 $610.99 Save $18.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01706-001

Axis 01706-001 Male Coupler 1.5" NPS/NPT

1.5" male coupler connects modern Axis pendant kits to legacy mounts
- 1.5" NPS/NPT male thread fits existing female ports on older infrastructure
- Aluminum with black anodized finish resists corrosion in humid or coastal environments
- Included lock nut prevents vibration loosening during operation
In stock · Ships same business day

$56.69 $54.99 Save $1.70

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01714-001

Axis 01714-001 Terminal Block to 3.5mm Audio Extension

Terminal block to 3.5mm audio conversion for Axis IP cameras
- Passive design connects professional screw terminals to standard 3.5mm jacks
- Supports mono and stereo audio with no external power required
- IP65 rated housing withstands 24/7 security deployments in varied conditions
In stock · Ships same business day

$12.36 $11.99 Save $0.37

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01774-001

Axis 01774-001 2MP CS-Mount Lens F1.4 3-10.5mm

CS-mount lens F1.4 3–10.5mm zoom for low-light surveillance
- F1.4 aperture maximizes light transmission in dim conditions
- DC-Iris auto-adjusts exposure across changing lighting throughout day
- 3–10.5mm manual zoom covers wide area to medium telephoto range
Special Order · Ships in 2-3 weeks

$80.40 $77.99 Save $2.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01812-001

Axis 01812-001 M12 16mm F1.8 Fixed Lens

M12 16mm F1.8 fixed lens for narrowed surveillance coverage
- 16mm focal length with F1.8 aperture for low-light performance
- M12 mount compatible with AXIS F-series and FA-series sensor units
- Forensic WDR and Lightfinder for extended-range identification tasks
In stock · Ships same business day

$121.99

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 01845-001

Axis 01845-001 EX d Cable Gland M20

M20 EX d cable gland for flameproof enclosures in hazardous areas
- EX d rated construction for explosive atmosphere compliance and safety
- M20 thread size for standard hazardous location enclosure compatibility
- Non-armored cable support with IP67/IP68 sealing for classified zones
Special Order · Ships in 2-3 weeks

$325.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 02006-001

Axis 02006-001 M12 Lens F1.8 IR 2.1mm 10-Pack

Ultra-wide 148° M12 lens with F1.8 and integrated IR—10-pack
- 148° horizontal field of view captures entire corridors from one mount
- F1.8 aperture gathers 50% more light for low-light indoor monitoring
- Integrated 850nm IR illumination for full darkness surveillance
In stock · Ships same business day

$228.86 $221.99 Save $6.87

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02012-001

Axis 02012-001 M12 2.8mm Lens Assembly

Wide-angle M12 lens for indoor IR surveillance in tight spaces
- 2.8mm focal length with F1.6 aperture gathers light in low-light conditions
- IR-optimized optics work with night vision–capable camera systems
- M12 10-pin connector integrates directly into compatible Axis cameras
Special Order · Ships in 2-3 weeks

$209.00 $206.99 Save $2.01

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Altronix TROVE3MBK3 Access Control Enclosure With TM3B Backplane

Altronix TROVE3SH3 Access Control Enclosure with TSH3 Backplane

Altronix TROVE3SS3 Trove3 w/TSS3 Backplane

Altronix TROVE3SWC Side-Mount Battery Cabinet

Altronix TROVE3V3 Access Control Integration Enclosure

Axis 01469-001 5MP 8-50mm F1.6 P-Iris Verifocal Lens

Axis 01491-001 Surveillance Card 128GB microSDXC

Axis 01570-001 Stainless Steel Pole Mount

Axis 01678-001 Surveillance Card 128GB microSDXC 10-Pack

Axis 01706-001 Male Coupler 1.5" NPS/NPT

Axis 01714-001 Terminal Block to 3.5mm Audio Extension

Axis 01774-001 2MP CS-Mount Lens F1.4 3-10.5mm

Axis 01812-001 M12 16mm F1.8 Fixed Lens

Axis 01845-001 EX d Cable Gland M20

Axis 02006-001 M12 Lens F1.8 IR 2.1mm 10-Pack

Axis 02012-001 M12 2.8mm Lens Assembly

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading