IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
Aiphone

SKU: SBX-2G/A

Aiphone SBX-2G/A 2-Gang Stainless Steel Surface Mount Box

2-gang stainless steel surface mount box with PoE+ for Aiphone systems
- Stainless steel construction resists corrosion in outdoor and humid environments
- PoE+ (802.3at) power eliminates separate 24VDC wiring for compatible devices
- 2-gang form factor fits standard wall, pole, and rack mounting configurations
In stock · Ships same business day

$117.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Aiphone

SKU: SBX-AXDV30

Aiphone SBX-AXDV30 30-Degree Angle Box for AX-DV

30-degree wall-mount angle box for Aiphone AX-DV door stations
- Weather and vandal-resistant enclosure protects connectors and circuitry
- 30-degree angled mount optimizes camera sight lines on flat surfaces
- Compact design fits 7-11/16" H × 3-7/8" W with internal cable routing
In stock · Ships same business day

$92.99 $86.99 Save $6.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Aiphone

SKU: SBX-NVP/A

Aiphone SBX-NVP/A Surface Mount Enclosure Box

Surface-mount enclosure for 2MP Aiphone networked video systems
- Mounts to walls, poles, or racks in vertical and horizontal orientation
- 2MP-rated housing integrates networked video components at access points
- Surface-mount design installs without wall recessing or structural cuts
In stock · Ships same business day

$86.99 $81.99 Save $5.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Aiphone

SKU: W-DIN11

Aiphone W-DIN11 DIN Rail Mounting Bracket

Steel DIN rail bracket for Aiphone GT series intercoms in control cabinets
- Mounts on standard 35mm DIN rail with no drilling or adapters required
- Steel construction handles GT-1A, GT-1C7, GT-1D, GT-1M3, and GT-MKB-N devices
- Fits indoor equipment racks and control cabinets; installs with standard screwdriver
In stock · Ships same business day

$12.99

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1

Altronix TROVE1 Modular Access Enclosure

Modular UL Listed enclosure for access control and power distribution
- Customizable modular design integrates security components to fit your layout
- UL Listed construction meets code requirements for access control installations
- Compact form factor fits space-constrained deployments and equipment staging
Special Order · Ships in 2-3 weeks

$373.96 $211.99 Save $161.97

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1AG1R

Altronix TROVE1AG1R Rack Enclosure With ALTX/AMAG Power

Rack enclosure with 24VDC power and battery backup for access control
- Field-configurable ALTX/AMAG modules support access control and surveillance
- 24VDC output with integrated battery backup for uninterrupted power delivery
- Rack-mounted design centralizes power distribution for multi-device installations
Special Order · Ships in 2-3 weeks

$1,471.49 $831.99 Save $639.50

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1AL1R

Altronix TROVE1AL1R Trove Rack w/Altronix Bacplane

19-inch rack enclosure with integrated backplane for access control power
- Integrated Altronix backplane eliminates external wiring between modules
- Supports multiple power and distribution modules for multi-door deployments
- Compact rack-mount design fits standard 19-inch server racks and cabinets
Special Order · Ships in 2-3 weeks

$1,194.61 $675.99 Save $518.62

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1AL1RSX

Altronix TROVE1AL1RSX Trove Rack w/Altronix Bacplane,SECURIX

2U rack enclosure with integrated Altronix backplane and tamper lock
- Fully assembled 19-inch rack mount with cam-lock security and tamper switch
- Integrated backplane supports 12 power outputs at 24VDC, 12A maximum current
- Includes battery backup with AC fail supervision for unattended deployments
Special Order · Ships in 2-3 weeks

$1,210.25 $683.99 Save $526.26

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1BL1

Altronix TROVE1BL1 Blank Backplane Enclosure

UL Listed blank backplane for field-configured 24VDC security systems
- Accepts Altronix TROVE series modules for custom power and control setup
- Metal chassis rated for 24/7 operation in wall-mount or rack configurations
- Build only what you need—eliminate unused features and reduce total cost
Special Order · Ships in 2-3 weeks

$636.20 $359.99 Save $276.21

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Altronix

SKU: TROVE1BL1R

Altronix TROVE1BL1R Blank Rack Mount Enclosure

Blank 19" rack mount enclosure with integrated backplane for custom builds
- 3.25" x 19.0" x 26.5" rack mount form factor fits standard security cabinets
- Integrated backplane simplifies modular component mounting and interconnection
- Customizable design lets you select and install only required power and control modules
In stock · Ships same business day

$1,158.21 $654.99 Save $503.22

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Altronix

SKU: TROVE1C1

Altronix TROVE1C1 Access Control Integration Enclosure

Integrated enclosure consolidates access control power, relays, and mounting
- Pre-wired backplane termination cuts field assembly labor significantly
- DIN rail compatible modules support relay control and door strike circuits
- Wall or cabinet mount fits retrofit installations and space-constrained sites
In stock · Ships same business day

$472.54 $267.99 Save $204.55

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Altronix

SKU: TROVE1DM1

Altronix TROVE1DM1 Access Control Power Integration Enclosure

Consolidated DMP access control power enclosure with factory-assembled backplane
- Factory-assembled backplane eliminates field wiring between DMP modules and power distribution
- Centralized power distribution reduces scattered supplies and wall outlet requirements
- Wall or surface mount in server rooms, electrical closets, or racks; supports multiple DMP modules
In stock · Ships same business day

$504.73 $285.99 Save $218.74

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Altronix

SKU: TROVE1DR1

Altronix TROVE1DR1 24-Door Access Control Power Enclosure

24-door access control consolidation in compact 18"H wall-mount enclosure
- Modular TPD1 backplane supports up to 24 doors with integrated power distribution
- Cam lock + tamper switch (pre-installed) for physical security and breach detection
- Compact 18" × 14.5" × 4.62" profile fits space-constrained electrical rooms
In stock · Ships same business day

$566.82 $320.99 Save $245.83

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1ED

Altronix TROVE1ED Regulated Power Supply

12A regulated 24VDC supply with battery backup for security systems
- 12 outputs deliver 24VDC at up to 12A for access control and surveillance
- Battery backup with AC fail supervision maintains power during outages
- Rack-mount form factor with UL Listed approval for code-compliant installations
Special Order · Ships in 2-3 weeks

$396.20 $307.99 Save $88.21

Add to Cart
The item has been added
Compare

Out of stock
Altronix

SKU: TROVE1HW1R

Altronix TROVE1HW1R Rack Mount Access Control Enclosure

19-inch rack mount hub for multi-door access control integration
- Backplane architecture reduces field wiring and speeds multi-door deployments
- Modular slots accommodate controllers, power supplies, and interface cards
- Centralized power distribution with monitoring for 24/7 access systems
Special Order · Ships in 2-3 weeks

$1,454.57 $822.99 Save $631.58

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Altronix

SKU: TROVE1M1

Altronix TROVE1M1 Access Control Power Integration Enclosure

Modular access control enclosure with integrated power distribution
- Backplane architecture consolidates Mercury platform hardware and power
- UL Listed for code-compliant electrical installations and inspections
- Compact wall-mount or equipment room form factor reduces wiring labor
In stock · Ships same business day

$552.84 $312.99 Save $239.85

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

Aiphone SBX-2G/A 2-Gang Stainless Steel Surface Mount Box

Aiphone SBX-AXDV30 30-Degree Angle Box for AX-DV

Aiphone SBX-NVP/A Surface Mount Enclosure Box

Aiphone W-DIN11 DIN Rail Mounting Bracket

Altronix TROVE1 Modular Access Enclosure

Altronix TROVE1AG1R Rack Enclosure With ALTX/AMAG Power

Altronix TROVE1AL1R Trove Rack w/Altronix Bacplane

Altronix TROVE1AL1RSX Trove Rack w/Altronix Bacplane,SECURIX

Altronix TROVE1BL1 Blank Backplane Enclosure

Altronix TROVE1BL1R Blank Rack Mount Enclosure

Altronix TROVE1C1 Access Control Integration Enclosure

Altronix TROVE1DM1 Access Control Power Integration Enclosure

Altronix TROVE1DR1 24-Door Access Control Power Enclosure

Altronix TROVE1ED Regulated Power Supply

Altronix TROVE1HW1R Rack Mount Access Control Enclosure

Altronix TROVE1M1 Access Control Power Integration Enclosure

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading