IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Out of stock
STI

SKU: BPF1008

STI BPF1008 EnviroArmour Fiberglass Back Panel 10x8

10x8 fiberglass back panel shields access control in outdoor/wet conditions
- Weatherproof protection for readers, strike hardware, and cabling outdoors
- Fiberglass construction with environmental sealing resists UV and corrosion
- Mounts behind STI 9VDC access control systems on doors and frames
Special Order · Ships in 2-3 weeks

$33.66 $22.99 Save $10.67

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: BPP0606

STI BPP0606 EnviroArmour Polycarbonate Back Panel 6x6

6x6 polycarbonate back panel with EnviroArmour for outdoor access control
- Weatherproof polycarbonate construction rated for outdoor and high-traffic use
- Surface-mount design compatible with STI readers, keypads, and access hardware
- 9VDC operation integrates with standard access control power supplies
Special Order · Ships in 2-3 weeks

$16.34 $11.99 Save $4.35

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-4100-FR

STI Break Glass Stopper® - Large, French Labeling

Large break glass stopper with TCP/IP integration for emergency egress
- TCP/IP networked control integrates with access control systems
- Large format design fits standard emergency egress installations
- French labeling supports multilingual facility requirements
Special Order · Ships in 2-3 weeks

$58.75 $37.99 Save $20.76

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-4130-FR

STI Break Glass Stopper® Large with Spacer, French Labeling

Large break glass stopper with spacer for STI TCP/IP stations
- Integrated spacer simplifies mounting in access control and emergency systems
- French labeling supports North American and international deployments
- Compatible with STI break-glass stations using TCP/IP communication
Special Order · Ships in 2-3 weeks

$72.85 $46.99 Save $25.86

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-9631-R

STI Clock/Bell Damage Stopper® - Red 10.5" Diameter

10.5" red protective enclosure for clock/bell systems with TCP/IP control
- Bright red 10.5" diameter housing shields against accidental or intentional damage
- TCP/IP network connectivity for remote monitoring and system management
- Wall or ceiling mount for schools, offices, healthcare, and public facilities
Special Order · Ships in 2-3 weeks

$68.58 $43.99 Save $24.59

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: CP-SS13-EN

STI CP-SS13-EN Stopper® Station 3-Pack Green

Networked 3-pack emergency stations with green housing for facility integration
- Three TCP/IP connected units for centralized monitoring across distributed locations
- Green housing for high-visibility identification in emergency response scenarios
- Compatible with access control and building automation system infrastructure
Special Order · Ships in 2-3 weeks

$261.56 $177.99 Save $83.57

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: STI-6602-CY

STI Custom Yellow Replacement Horn Kit for STI-13000 Universal Stop...

Custom yellow replacement horn for STI-13000 stop button systems
- Wired 9VDC operation matches STI-13000 series specifications
- Color-matched yellow horn component for visual alert applications
- Direct compatibility with STI-13000 universal stop button assemblies
Special Order · Ships in 2-3 weeks

$64.02 $40.99 Save $23.03

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: KIT-18015-9

STI Deactivation cable (6 in.) for STI-6200, STI-6205 or STI-6210

6-inch deactivation cable for STI strike and lock systems
- Works with STI-6200, STI-6205, and STI-6210 electronic strikes
- Operates at 9VDC with RS-485 and RS-232 serial communication
- Compact 6-inch length for tight door frame installations
Special Order · Ships in 2-3 weeks

$4.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: ED-50

STI ED-50 Rex Plus Electronic Watchdog

12VDC electronic watchdog for multi-user door access control
- Supports up to 99 users in single control installation
- Low-power 12VDC at 100mA for integration with existing systems
- Compact form factor designed for standard access control setups
Special Order · Ships in 2-3 weeks

$126.43 $87.99 Save $38.44

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EF060604-O

STI EF060604-O EnviroArmour Fiberglass Opaque Credential

Polycarbonate credential for 7-door TCP/IP access control systems
- Injection-molded polycarbonate construction withstands repeated credential cycles
- UL/cUL certified (EP242410-O) for multi-door enterprise deployments
- TCP/IP communication with 44 dB(A) output, opaque RAL 7035 finish
Special Order · Ships in 2-3 weeks

$267.11 $167.99 Save $99.12

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EF060604-W

STI EF060604-W EnviroArmour Fiberglass Window Reader

Polycarbonate window for HID/NFC readers across up to 7 doors
- Compatible with HID proximity and NFC/13.56MHz credential systems
- Injection-molded polycarbonate construction rated for multi-door access control
- 44dB(A) sound output with UL/cUL approval (6 EP242410-O)
Special Order · Ships in 2-3 weeks

$376.87 $236.99 Save $139.88

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EF080804-W

STI EF080804-W EnviroArmour Fiberglass Window Reader

Outdoor proximity reader with NFC, 7-door capacity, polycarbonate housing
- HID proximity + NFC 13.56MHz dual-credential support for card and mobile access
- Polycarbonate enclosure with RAL 7035 finish rated for outdoor and harsh environments
- 44dB(A) sound output, UL/cUL 6 certified for secure multi-door access control
Special Order · Ships in 2-3 weeks

$457.17 $286.99 Save $170.18

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EFAPBKT

STI EFAPBKT EnviroArmour Fiberglass Stationary Panel Bracket Kit

Fiberglass bracket kit for access control panel mounting and weather protection
- Fiberglass construction withstands outdoor exposure on stationary panel installations
- Includes bracket assembly and mounting hardware for wall-mount door strike systems
- 9VDC operation integrates with standard access control and reader configurations
Special Order · Ships in 2-3 weeks

$64.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EFSPBKT

STI EFSPBKT EnviroArmour Swing Panel Bracket Kit

Door frame bracket kit for STI swing panels, 9VDC access control
- Steel construction with environmental protection for secure panel mounting
- Designed for STI swing panel assemblies in access control installations
- Operates on 9VDC standard compatible with access control power supplies
Special Order · Ships in 2-3 weeks

$64.99

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EM362408A

STI EM362408A Metal Protective Cabinet with AC/Heater

Metal cabinet with integrated AC/heating for access control equipment
- Integrated AC and heating maintains thermal stability for sensitive electronics
- Metal construction with powder-coated finish protects equipment from tampering
- Wall-mount and surface-mount capable for flexible installation in indoor/outdoor
Special Order · Ships in 2-3 weeks

$6,298.00 $3,898.99 Save $2,399.01

Add to Cart
The item has been added
Compare

Out of stock
STI

SKU: EN483612

STI EN483612 EnviroArmour Solid Fiberglass Enclosure

Solid fiberglass enclosure for outdoor access control in coastal/industrial environments
- Monolithic fiberglass construction resists corrosion, rust, and salt spray
- No internal cavities eliminate condensation traps; minimal maintenance required
- Accommodates proximity, smart card, and multi-technology readers with sealed weatherproofing
Special Order · Ships in 2-3 weeks

$4,347.50 $2,766.99 Save $1,580.51

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

STI BPF1008 EnviroArmour Fiberglass Back Panel 10x8

STI BPP0606 EnviroArmour Polycarbonate Back Panel 6x6

STI Break Glass Stopper® - Large, French Labeling

STI Break Glass Stopper® Large with Spacer, French Labeling

STI Clock/Bell Damage Stopper® - Red 10.5" Diameter

STI CP-SS13-EN Stopper® Station 3-Pack Green

STI Custom Yellow Replacement Horn Kit for STI-13000 Universal Stop...

STI Deactivation cable (6 in.) for STI-6200, STI-6205 or STI-6210

STI ED-50 Rex Plus Electronic Watchdog

STI EF060604-O EnviroArmour Fiberglass Opaque Credential

STI EF060604-W EnviroArmour Fiberglass Window Reader

STI EF080804-W EnviroArmour Fiberglass Window Reader

STI EFAPBKT EnviroArmour Fiberglass Stationary Panel Bracket Kit

STI EFSPBKT EnviroArmour Swing Panel Bracket Kit

STI EM362408A Metal Protective Cabinet with AC/Heater

STI EN483612 EnviroArmour Solid Fiberglass Enclosure

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading