IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
SDC

SKU: 805AL

SDC/Security Door Controls 805AL 6 AMP Key Switch Assembly

6 AMP key switch controller for OSDP door access systems
- OSDP-compliant wired controller integrates with proximity and keypad readers
- 6 AMP rating handles electromagnetic locks and door strikes in commercial setups
- NFC/13.56MHz credential support works across standard enterprise access architectures
In stock · Ships same business day

$126.99 $114.99 Save $12.00

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
SDC

SKU: AB11V

Sdc/Security Door Controls AB11V Angle Bracket

1" × 1" × 11" angle bracket for OSDP controller mounting
- Supports proximity and keypad readers with NFC/13.56MHz credentials
- Wired connectivity for stable OSDP-enabled access control systems
- 628-spec aluminum construction for standard door frame installations
In stock · Ships same business day

$34.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: D15-1

SDC/Security Door Controls D15-1 Alternate Action Push Button

Toggle push button controller for HID access control at 30VDC
- Alternate action (on/off) operation reduces solenoid hold time and power draw
- 30VDC operation integrates with standard access control power supplies
- Controls door strikes, magnetic locks, and electric latch retraction devices
Special Order · Ships in 2-3 weeks

$89.99 $85.99 Save $4.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: E12Z

Sdc/Security Door Controls E12Z Top Jamb Bracket

Top jamb bracket for NFC/13.56MHz reader deployment on E12Z platform
- Mounts proximity and keypad readers at door frame top for standard installations
- OSDP protocol support integrates with SDC E12Z controller systems
- Wired connectivity for NFC/13.56MHz credential access control readers
Special Order · Ships in 2-3 weeks

$70.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: FP12V

Sdc/Security Door Controls FP12V Filler Plate

Filler plate for multi-reader OSDP door control systems
- Integrates with NFC/13.56MHz proximity and keypad readers
- OSDP protocol support for coordinated multi-reader deployments
- Standard mounting for security integrator installations
Special Order · Ships in 2-3 weeks

$29.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: HDB2V

SDC/Security Door Controls HDB2V Hercules Door Bracket

Dual-door controller bracket for OSDP systems with NFC/proximity support
- OSDP-compliant wired controller for proximity and keypad readers
- NFC/13.56MHz credential support for mixed-authentication deployments
- Retrofit and new construction mounting for dual-door access control
Special Order · Ships in 2-3 weeks

$296.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: LRCR1R

Sdc/Security Door Controls LRCR1R Corbin Russwin Rex Controller

Multi-door controller for up to 63 doors with 250,000 user support
- Supports DESFire, MIFARE, NFC 13.56MHz, and 125kHz Prox credentials
- OSDP and TCP/IP communication for integration with modern systems
- Corbin Russwin Rex compatible for streamlined enterprise deployments
Special Order · Ships in 2-3 weeks

$79.99 $71.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: LRH1R

Sdc/Security Door Controls LRH1R HAGER REX SW Kit Assembly

Multi-credential controller for 63 doors and 250,000 users
- Supports DESFire, MIFARE, NFC 13.56 MHz, and 125 kHz proximity cards
- OSDP and TCP/IP protocols for modern access control platform integration
- Includes HAGER REX software kit for configuration and management
Special Order · Ships in 2-3 weeks

$83.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: LRSG2R

Sdc/Security Door Controls LRSG2R LR100 Sargent Rex Kit

Network controller for 63 doors with 250,000 user accounts and Sargent Rex
- Supports DESFire, MIFARE, NFC, and 125kHz proximity credentials in one system
- OSDP and TCP/IP connectivity for enterprise access control platform integration
- LR100 reader module included; wired network deployment for mid-to-large facilities
Special Order · Ships in 2-3 weeks

$79.99 $71.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: LRVD1R

SDC/Security Door Controls LRVD1R REX Status Controller

Networked controller for up to 63 doors with 250,000 user credentials
- Supports DESFire, MIFARE, NFC 13.56 MHz, and 125 kHz proximity cards
- OSDP and TCP/IP protocols for standards-compliant enterprise integration
- REX Status monitoring with real-time event logging for compliance tracking
Special Order · Ships in 2-3 weeks

$79.99 $71.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TJ350

Sdc/Security Door Controls TJ350 Single Top Jamb Mounting Kit

Top jamb controller for NFC proximity access with OSDP integration
- OSDP protocol with wired connectivity for enterprise access control systems
- NFC/13.56MHz proximity credential support compatible with mixed readers
- Compact space-efficient mounting designed for top jamb installations
Special Order · Ships in 2-3 weeks

$104.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TJ352

SDC/Security Door Controls TJ352 Double Door Top Jamb Controller

Dual-door top jamb controller with NFC/13.56MHz and OSDP
- Controls 2 doors via wired OSDP protocol for central system integration
- Reads NFC/13.56MHz proximity cards and supports keypad entry devices
- Mounts above double door frames for discreet installation without readers
Special Order · Ships in 2-3 weeks

$189.99 $181.99 Save $8.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: TJ62

Sdc/Security Door Controls TJ62 Top Jamb Mounting Kit

Top jamb mounting kit for OSDP proximity and keypad readers
- Mounts elevated on commercial door frames to reduce sight-line obstruction
- Supports NFC/13.56MHz proximity cards and keypad credentials over OSDP
- Wired controller integration for multi-credential access control systems
Special Order · Ships in 2-3 weeks

$96.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: UF12V

Sdc/Security Door Controls UF12V Bracket for 1512 and 1572

Door frame bracket for SDC 1512 and 1572 controllers with OSDP
- Mounts SDC 1512 and 1572 controllers in standard door frame configurations
- Supports NFC/13.56MHz and proximity keypad readers over OSDP protocol
- 12V wired installation for mid-range access control deployments
Special Order · Ships in 2-3 weeks

$89.99

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 423AU

Security Door Controls 423AU OSDP Controller

24VDC OSDP controller for NFC proximity and keypad access
- OSDP protocol support integrates with centralized access control platforms
- Supports NFC/13.56MHz proximity cards and keypad entry in one unit
- Wired 24VDC operation for reliable mixed-credential door control
Special Order · Ships in 2-3 weeks

$107.99 $97.99 Save $10.00

Add to Cart
The item has been added
Compare

Out of stock
SDC

SKU: 423MUL1G

Security Door Controls 423MUL1G 10-Door Controller

10-door controller with multi-credential support for mixed deployments
- Supports DESFire, MIFARE, NFC, and 125kHz proximity in one unit
- Scales to 250,000 user records for enterprise access management
- OSDP protocol integrates with existing access control software
Special Order · Ships in 2-3 weeks

$131.99 $118.99 Save $13.00

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

SDC/Security Door Controls 805AL 6 AMP Key Switch Assembly

Sdc/Security Door Controls AB11V Angle Bracket

SDC/Security Door Controls D15-1 Alternate Action Push Button

Sdc/Security Door Controls E12Z Top Jamb Bracket

Sdc/Security Door Controls FP12V Filler Plate

SDC/Security Door Controls HDB2V Hercules Door Bracket

Sdc/Security Door Controls LRCR1R Corbin Russwin Rex Controller

Sdc/Security Door Controls LRH1R HAGER REX SW Kit Assembly

Sdc/Security Door Controls LRSG2R LR100 Sargent Rex Kit

SDC/Security Door Controls LRVD1R REX Status Controller

Sdc/Security Door Controls TJ350 Single Top Jamb Mounting Kit

SDC/Security Door Controls TJ352 Double Door Top Jamb Controller

Sdc/Security Door Controls TJ62 Top Jamb Mounting Kit

Sdc/Security Door Controls UF12V Bracket for 1512 and 1572

Security Door Controls 423AU OSDP Controller

Security Door Controls 423MUL1G 10-Door Controller

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading

Certified Experts

Manufacturer Authorized

Expert Access

Since 2014

Brands

Categories

IP Cameras

Ordering

Legal

Company

Sales & Expert Advice

Customer Service